journal article·2008-08Open access

High-Temperature Deformation Behavior and Formability of a Zr-Cu-Al-Ni Bulk Metallic Glass

H.-J. Jun, K.S. Lee, J. Eckert, Y.W. Chang

Abstract

The deformation behavior of a monolithic Zr55Cu30Al10Ni5 (at. pct) bulk metallic glass (BMG) fabricated by suction casting has been investigated at elevated temperatures in this study. A series of compression tests has been performed in the supercooled liquid temperature region. In the homogeneous flow regime, this alloy exhibited a transition from the Newtonian to non-Newtonian flow depending upon both the strain rate and the temperature. These two flow modes were then described by applying the Newtonian viscous flow theory and the transition state theory, respectively. On the basis of a dynamic materials model (DMM), a processing map could successfully be constructed to estimate the feasible forming conditions for this BMG alloy. Imaginary laboratory-scale extrusion tests were also performed to determine solid-to-solid formability, and the results from both the finite element method (FEM)-based simulation and processing map were then compared and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. T. Zhang, A. Inoue, T. Masumoto: Mater. Trans. JIM, 1991, vol. 32, pp. 1005–1010.2320/matertrans1989.32.1005 ↗
2. Y.J. Kim, R. Busch, W.L. Johnson, A.J. Rulison, W.K. Rhim, D. Isheim: Appl. Phys. Lett., 1994, vol. 65, pp. 2136–3810.1063/1.112768 ↗
3. A. Peker, W.L. Johnson: Appl. Phys. Lett., 1993, vol. 63, pp. 2342–4410.1063/1.110520 ↗
4. A. Leonhard, L.Q. Xing, M. Heilmaier, A. Gebert, J. Eckert, L. Schultz: Nanostruct. Mater., 1998, vol. 10, pp. 805–1710.1016/S0965-9773(98)00117-2 ↗
5. C.J. Gilbert, R.O. Ritchie, W.L. Johnson: Appl. Phys. Lett., 1997, vol. 71, pp. 476–78.10.1063/1.119610 ↗
6. H.A. Bruck, T. Christman, A.J. Rosakis, W.L. Johnson: Scripta Metall., 1994, vol. 30, pp. 429–3410.1016/0956-716X(94)90598-3 ↗
7. J. Schroers, N. Paton: Adv. Mater. Proc., 2006, vol. 164, pp. 61–63
8. H.-W. Zhang, T.J. Zhou: Phys. Lett. A, 2006, vol. 350, pp. 297–30110.1016/j.physleta.2005.10.034 ↗
9. T. Zhang, A. Inoue, M. Matsushita, J. Saida: J. Mater. Res., 2001, vol. 16, pp. 20–2310.1557/JMR.2001.0006 ↗
10. K.S. Lee, Y.W. Chang: Metall. Mater. Int., 2005, vol. 11, pp. 53–5710.1007/BF03027484 ↗
11. F. Spaepen: Scripta Mater., 2006, vol. 54, pp. 363–67.10.1016/j.scriptamat.2005.09.046 ↗
12. T.G. Nieh, J. Wadsworth: Scripta Mater., 2006, vol. 54, pp. 387–9210.1016/j.scriptamat.2005.04.052 ↗
13. S. Zhu, X. Wang, F. Qin, K. Abe, H. Kimura, A. Inoue: Mater. Trans., 2006, vol. 47, pp. 2308–1110.2320/matertrans.47.2308 ↗
14. L. Liu, Z.F. Wu, J. Zhang: J. Alloys Compd., 2002, vol. 339, pp. 90–9510.1016/S0925-8388(01)01977-6 ↗
15. V. Keryvin, M.-L. Vaillant, T. Rouxel, M. Huger, T. Gloriant, T. Kawamura: Intermetallics, 2002, vol. 10, pp. 1289–9610.1016/S0966-9795(02)00150-4 ↗
16. M. Bletry, P. Guyot, Y. Brechet, J.J. Blandin, J.L. Soubeyroux: Intermetallics, 2004, vol. 12, pp. 1051–5510.1016/j.intermet.2004.04.019 ↗
17. G. Wang, J. Shen, J.F. Sun, Y.J. Hwang, J. Zou, Z.P. Lu, Z.H. Stachurski, B.D. Zhou: J. Non-Cryst. Solids, 2005, vol. 351, pp. 209–1710.1016/j.jnoncrysol.2004.11.006 ↗
18. I. Karaman, J. Robertson, J.-T. Im, S.N. Mathauthu, Z.P. Luo, K.T. Hartwig: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 247–5610.1007/s11661-004-0125-5 ↗
19. J.P. Chu, H. Wijaya, C.W. Wu, T.R. Tsai, C.S. Wei, T.G. Nieh, J. Wadsworth: Appl. Phys. Lett., 2007, vol. 90, p. 03410110.1063/1.2431710 ↗
20. Z.H. Zhang, J.X. Xie: Mater. Sci. Eng. A, 2006, vol. 433, pp. 323–2810.1016/j.msea.2006.06.113 ↗
21. W.J. Kim, J.B. Lee, H.G. Jeong: Mater. Sci. Eng. A, 2006, vol. 428, pp. 205–1010.1016/j.msea.2006.05.002 ↗
22. A. Inoue: Acta Mater., 2000, vol. 48, pp. 279–30610.1016/S1359-6454(99)00300-6 ↗
23. T. Fukami, K. Okabe, K. Okai, T. Yamasaki, T. Zhang, A. Inoue: Mater. Sci. Eng. B, 2004, vol. 111, pp. 189–9610.1016/S0921-5107(04)00204-1 ↗
24. A. Reger-Leonhard, M. Heilmaier, J. Eckert: Scripta Mater., 2000, vol. 43, pp. 459–6410.1016/S1359-6462(00)00417-6 ↗
25. B.S.S. Daniel, A. Reger-Leonhard, M. Heilmaier, J. Eckert, L. Schultz: Mech. Time-Dependent Mater., 2002, vol. 6, pp. 193–20610.1023/A:1015045324786 ↗
26. K.S. Lee, Y.W. Chang: Mater. Sci. Eng. A, 2005, vol. 399, pp. 238–4310.1016/j.msea.2005.03.103 ↗
27. H.-S. Shin, Y.-J. Jeong, H.-Y. Choi, A. Inoue: Mater. Sci. Eng. A, 2007, vols. 449–451, pp. 243–4710.1016/j.msea.2006.02.290 ↗
28. B. van Aken, P. de Hey, J. Sietsma: Mater. Sci. Eng. A, 2000, vol. 278, pp. 247–5410.1016/S0921-5093(99)00574-2 ↗
29. A. Slipenyuk, J. Eckert: Scripta Mater., 2004, vol. 50, pp. 39–4410.1016/j.scriptamat.2003.09.038 ↗
30. F. Spaepen: Acta Metall., 1977, vol. 25, pp. 407–15.10.1016/0001-6160(77)90232-2 ↗
31. Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, L.A. Lark, D.R. Barker: Metall. Trans. A, 1984, vol. 15A, pp. 1883–9210.1007/BF02664902 ↗
32. A.K.S. Kumar: Master’s Thesis, Indian Institute of Science, Bangalore, India, 1987
33. H. Ziegler, Eds. I.N. Sneddon, and R. Hill: Progress in Solid Mechanics, Wiley, New York, NY, 1965, vol. 4, pp. 91–193
34. C.A. Schuh, A.C. Lund, T.G. Nieh: Acta Mater., 2004, vol. 52, pp. 5879–9110.1016/j.actamat.2004.09.005 ↗
35. K.S. Lee, W. Bang, T.K. Ha, S. Ahn, Y.W. Chang: Key Eng. Mater., 2007, vols. 340–341, pp. 59–6410.4028/www.scientific.net/KEM.340-341.59 ↗