Influence of Alloy Content and Prior Microstructure on Evolution of Secondary Phases in Weldments of 9Cr-Reduced Activation Ferritic-Martensitic Steel
Source abstract
Abstract
9Cr-Reduced Activation Ferritic-Martensitic steels with 1 and 1.4 wt pct tungsten are materials of choice for the test blanket module in fusion reactors. The steels possess a tempered martensite microstructure with a decoration of inter- and intra-lath carbides, which undergoes extensive modification on application of heat. The change in substructure and precipitation behavior on welding and subsequent thermal exposure has been studied using both experimental and computational techniques. Changes i.e., formation of various phases, their volume fraction, size, and morphology in different regions of the weldment due to prolonged thermal exposure was influenced not only by the time and temperature of exposure but also the prior microstructure. Laves phase of type Fe2W was formed in the high tungsten steel, on aging the weldment at 823 K (550 °C). It formed in the fine-grained heat-affected zone (HAZ) at much shorter durations than in the base metal. The accelerated kinetics has been understood in terms of enhanced precipitation of carbides at lath/grain boundaries during aging and the concomitant depletion of carbon and chromium and enrichment of tungsten in the vicinity of the carbides. Therefore, the fine-grained HAZ in the weldment was identified as a region susceptible for failure during service.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fusion materials and technologies · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Baldev Raj and T. Jayakumar: J. Nucl. Mater., 2011, vol. 417(1-3), pp. 72-76.10.1016/j.jnucmat.2011.02.032 ↗
2. R.L. Klueh and E.E. Bloom: Nucl. Eng. Des./Fusion, 1985, vol. 2, pp. 383-389.10.1016/0167-899X(85)90026-6 ↗
3. R. Lindau and M. Schirra: Fusion Eng. Des., 2001, vol. 58-59, pp. 781-785.10.1016/S0920-3796(01)00562-2 ↗
4. A. Alamo, J.C. Brachet, A. Castaing, C. Lepoittevin and F. Barcelo: J. Nucl. Mater., 1998, vol. 258-263, pp. 1228-1235.10.1016/S0022-3115(98)00190-1 ↗
5. B. Van der Schaaf, F. Tavassoli, C. Fazio, E. Rigal, E. Diegele, R. Lindau and G. LeMorois: Fusion Eng. Des., 2003, vol. 69, pp. 197-203.10.1016/S0920-3796(03)00337-5 ↗
6. J.F. Salavy, L.V. Boccaccini, P. Chaudhuri, S. Cho, M. Enoeda, L.M. Giancarli, R.J. Kurtz, T.Y. Luo, K. Bhanu Sankara Rao and C.P.C. Wong: Fusion Eng. Des., 2010, vol. 85, pp. 1896-1902.10.1016/j.fusengdes.2010.06.017 ↗
7. M. Tamura, H. Hayakawa, A. Yoshitake, A. Hishinuma and T. Kondo: J. Nucl. Mater., 1988, vol. 155-157, pp. 620-625.10.1016/0022-3115(88)90384-4 ↗
8. R.L. Klueh: Int. Mater. Rev., 2005, vol. 50(5), pp. 287-310.10.1179/174328005X41140 ↗
9. F. Abe, T. Noda, H. Araki and S. Nakazawa: J. Nucl. Mater., 1991, vol. 179-181, pp. 663-666.10.1016/0022-3115(91)90176-8 ↗
10. R.L. Klueh, D.J. Alexander and M.A. Sokolov: J. Nucl. Mater., 2002, vol. 304, pp. 139-152.10.1016/S0022-3115(02)00885-1 ↗
11. L. Schaefer and M. Schirra: J. Nucl. Mater., 1999, vol. 271-272, pp. 455-458.10.1016/S0022-3115(98)00757-0 ↗
12. Y. Wei, W. Wei, S. Yi-Yin, and Y. Ke: Front. Mater. Sci., 2013, vol. 7(1), pp. 1-27.10.1007/s11706-013-0189-5 ↗
13. S. Ghosh: J. Mater. Sci., 2010, vol. 45, pp. 1823-1829.10.1007/s10853-009-4165-5 ↗
14. R.L. Klueh, N. Hashimoto and M.A. Sokolov: ASTM Spec. Tech. Publ., 2004, vol. 1447, pp. 376-390.
15. T. Hasegawa, Y. Tomita and A. Kohyama: J. Nucl. Mater., 1998, vol. 258-263, pp. 1153-1157.10.1016/S0022-3115(98)00138-X ↗
16. P. Aubert, F. Tavassoli, M. Reith and Y. Poitevin: J. Nucl. Mater., 2011, vol. 417, pp. 43-50.10.1016/j.jnucmat.2010.12.248 ↗
17. A. Alamo, A. Castaing, A. Fontes and P. Wident: J. Nucl. Mater., 2000, vol. 283-287, pp. 1192-1195.10.1016/S0022-3115(00)00100-8 ↗
18. H. Hayakawa, A. Yoshitake, M. Tamura, S. Natsume, A. Gotoh and A. Hishinuma: J. Nucl. Mater., 1991, vol. 179-181, pp. 693-696.10.1016/0022-3115(91)90183-8 ↗
19. Duck Young Ku, Seungjin Oh, Mu-Young Ahn, In-Keun Yu, Duck-Hoi Kim, Seungyon Cho, Im-Sub Choi, and Ki-Bum Kwon: J. Nucl. Mater., 2011, vol. 417(1), pp. 67-71.
20. Z. Jiang, L. Ren, J. Huang, X. Ju, H. Wu, Q. Huang and Y. Wu: Fusion Eng. Des., 2010, vol. 85, pp. 1903-1908.10.1016/j.fusengdes.2010.06.019 ↗
21. M. Vijayalakshmi, S. Saroja, V. Thomas Paul, R. Mythili and V.S. Raghunathan: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 161-174.10.1007/s11661-999-0204-8 ↗
22. V. Thomas Paul, S. Saroja, P. Hariharan, A. Rajadurai, and M. Vijayalakshmi: J. Mater. Sci., 2007, vol. 42, pp. 700–13.
23. D.J. Allen and S.J. Brett: Proc. International Symposium on Case Histories on Integrity and Failures in Industry, Milan, Italy, 1999, p. 133.
24. J.A. Francis, W. Mazur and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2006, vol. 22(12), pp. 1387-1395.10.1179/174328406X148778 ↗
25. S. Zheng, Q. Wu, Q. Haung, S. Liu and Y. Han: Fusion Eng. Des., 2011, vol. 86, pp. 2616-2619.10.1016/j.fusengdes.2011.02.072 ↗
26. B. Arivazhagan, G. Srinivasan, S.K. Albert and A.K. Bhaduri: Fusion Eng. Des., 2011, vol. 86, pp. 192-197.10.1016/j.fusengdes.2010.12.035 ↗
27. Q. Lu, W. Xu and S. van der Zwaag: Metall. Mater. Trans. A, 2014, vol. 45, pp. 6067-6074.10.1007/s11661-014-2557-x ↗
28. R. Foret, B. Zlamal and J. Sopousek: Welding J., 2006, vol. 85, pp. 211s-217s.
29. L. Kaufman: Computer Calculation of Phase Diagrams, Academic Press, NewYork, USA, 1970.
30. N. Saunders, X. Li, P. Miodownik, and J. Ph. Schille: in Proc. Symp. Mater. Des. Approaches Exper., 2001, pp. 185–97.
31. R.L. Klueh: J. Nucl. Mater., 2008, vol. 378, pp. 159-66.10.1016/j.jnucmat.2008.05.010 ↗
32. Ravi Kirana, S. Raju, R. Mythili, S. Saroja, T. Jayakumar, and E. Rajendra Kumar: Steel Res. Inter., 2015, DOI: 10.1002/srin.201400183.10.1002/srin.201400183 ↗
33. U.R. Kattner: JOM, 1997, vol. 49(12), pp. 14-19.10.1007/s11837-997-0024-5 ↗
34. H.L. Lucas, J. Weiss and E.Th. Henig: CALPHAD, 1982, vol. 6, pp. 229-251.10.1016/0364-5916(82)90004-9 ↗
35. S.G. Hong, W.B. Lee and C.G. Park: J. Nucl. Mater., 2001, vol. 288, pp. 202-207.10.1016/S0022-3115(00)00558-4 ↗
36. John Hald: Mater. Technol., 1996, vol. 67(9), pp. 369-374.
37. V. Thomas Paul, S. Saroja, S.K. Albert, T. Jayakamar, and E. Rajendra Kumar: Mater. Charat., 2014, vol. 96, pp. 213–24.10.1016/j.matchar.2014.08.013 ↗
38. Q. Zhu, Y.C. Lei, X.Z. Chen, W.J. Ren. X. Ju and Y.M. Ye: Fusion Eng. Des., 2011, vol. 86, pp. 407-411.10.1016/j.fusengdes.2011.03.070 ↗
39. R.L. Klueh and D.R. Harries: High-Chromium Ferritic and Martensitic Steels for Nuclear Applications, ASTM MON03, 2001.10.1520/MONO3-EB ↗
40. D.J. Alexander, P.J. Maziasz, and C.R. Brinkman: Microstructures and Mechanical Properties of Aging Material, Warrendale, PA, 1993, pp. 343–348.
41. H. Okamura, R. Ohtani, K. Saito, K. Kimura, R. Ishii, K. Fujiyama, S. Hongo, T. Iseki and H. Uchida: Nucl. Engg. Des., 1999, vol. 193, pp. 243-254.10.1016/S0029-5493(99)00181-8 ↗
42. G. Chakraborty, C.R. Das, S.K. Albert, A.K. Bhaduri, V. Thomas Paul, G. Panneerselvam, and A. Dasgupta: Mater. Charat., 2014, vol. 100, pp. 81–87.10.1016/j.matchar.2014.12.015 ↗
43. T. Sawai, K. Shiba and A. Hishinuma: J. Nucl. Mater., 2000, vol. 283-287, pp. 657-661.10.1016/S0022-3115(00)00089-1 ↗