journal article·2017-08

Imposed Thermal Fatigue and Post-Thermal-Cycle Wear Resistance of Biomimetic Gray Cast Iron by Laser Treatment

Qi Sui, Hong Zhou, Deping Zhang, Zhikai Chen, Peng Zhang

Publisher page

Abstract

The present study aims to create coupling biomimetic units on gray cast iron substrate by laser surface treatment (LST). LSTs for single-step (LST1) and two-step (LST2) processes, were carried out on gray cast iron in different media (air and water). Their effects on microstructure, thermal fatigue, and post-thermal-cycle wear (PTW) resistance on the specimens were studied. The tests were carried out to examine the influence of crack-resistance behavior as well as the biomimetic surface on its post-thermal-cycle wear behavior and different units, with different laser treatments for comparison. Results showed that LST2 enhanced the PTW behaviors of gray cast iron, which then led to an increase in its crack resistance. Among the treated cast irons, the one treated by LST2 in air showed the lowest residual stress, due to the positive effect of the lower steepness of the thermal gradient. Moreover, the same specimen showed the best PTW performance, due to its superior crack resistance and higher hardness as a result of it.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · High Entropy Alloys Studies · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. X. Nie, L. Wang, Z.C. Yao, L. Zhang, and F. Cheng: Surf. Coat. Technol., 2005, vol. 200, pp. 1745–50.10.1016/j.surfcoat.2005.08.046 ↗
2. Keum‐Oh Lee and Soon‐Bok Lee: Fatig. Fract. Eng. Mater. Struct., 2016, vol. 39, pp. 439–52.10.1111/ffe.12368 ↗
3. Z.J. Ma, D. Tao, Z. Yang, Y.C. Guo, J.P. Li, M.X. Liang, T. Lugee, and Yeung Li: Mater. Des., 2016, vol. 93, pp. 418–22.10.1016/j.matdes.2015.12.169 ↗
4. R. Thornton, T. Slatter, Alan Hywel Jones, and R. Lewis: Wear, 2011, vol. 271, pp. 2386–95.10.1016/j.wear.2010.12.014 ↗
5. G. Le Gigan, M. Ekh, T. Vernersson, and R. Lundén: Proc. Inst. Mech. Eng., Part D: J. Auto. Eng., 2016, p. 0954407016632090.
6. Seong-Hun Choo, Sunghak Lee, and Soon-Ju Kwon: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1211–21.10.1007/s11661-999-0271-x ↗
7. Viktor Norman, Peter Skoglund, Daniel Leidermark, and Johan Moverare: Int. J. Fatigue, 2016, vol. 88, pp. 121–31.10.1016/j.ijfatigue.2016.03.020 ↗
8. Panpan Zhang, Zhihui Zhang, Baoyu Zhang, Xin Tong, Yunhong Liang, Xiujuan Li, and Luquan Ren: J. Laser Appl., 2016, vol. 28, p. 022007.10.2351/1.4942492 ↗
9. Qi Sui, Peng Zhang, Hong Zhou, Yan Liu, and Luquan Ren: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 5534–47.10.1007/s11661-016-3637-x ↗
10. S. Kamat, X. Su, R. Ballarini, and A.H. Heuer: Nature, 2000, vol. 405, pp. 1036–40.10.1038/35016535 ↗
11. Zhi-kai Chen, Ti Zhou, Peng Zhang, Hai-feng Zhang, Wan-shi Yang, Hong Zhou, and Lu-quan Ren: Opt. Laser Technol., 2015, vol. 72, pp. 15–24.10.1016/j.optlastec.2015.03.008 ↗
12. Janez Grum and Roman Sturm: Surf. Coat. Technol., 1998, vol. 100, pp. 455–58.10.1016/S0257-8972(97)00670-1 ↗
13. Zhi-kai Chen, Chao Meng, Ji-xing Dong, Ti Zhou, Xin Tong, and Hong Zhou: Surf. Coat. Technol., 2016, vol. 286, pp. 25–35.10.1016/j.surfcoat.2015.12.009 ↗
14. Zuobo Pang, Hong Zhou, Peng Zhang, Dalong Cong, Chao Meng, Chuanwei Wang, and Luquan Ren: Appl. Surf. Sci., 2015, vol. 331, pp. 179–84.10.1016/j.apsusc.2015.01.039 ↗
15. Chao Meng, Hong Zhou, Haifeng Zhang, Xin Tong, Dalong Cong, Chuanwei Wang, and Luquan Ren: Mater. Des., 2013, vol. 51, pp. 886–93.10.1016/j.matdes.2013.05.005 ↗
16. Hong Zhou, Chengtao Wang, Qingchun Guo, Jiaxiang Yu, Mingxing Wang, Xunlong Liao, Yu Zhao, and Luquan Ren: J. Alloys Compd., 2010, vol. 505, pp. 801–07.10.1016/j.jallcom.2010.06.144 ↗
17. Qing-chun Guo, Hong Zhou, Cheng-tao Wang, Wei Zhang, Peng-yu Lin, Na Sun, and Luquan Ren: Appl. Surf. Sci., 2009, vol. 255, pp. 6266–73.10.1016/j.apsusc.2009.02.003 ↗
18. J.M. Thomas, C.N. Steven, K.J. Ball, B.C. Bedell, and D.P. Bim-Merle: Eng. Fail. Anal., 2002, vol. 9, pp. 63–76.10.1016/S1350-6307(00)00037-6 ↗
19. S.M.M. Hadavi, A. Abdollah-Zadeh, and M.S. Jamshidi: J. Mater. Process. Technol., 2004, vol. 147, pp. 385–88.10.1016/j.jmatprotec.2004.01.012 ↗
20. Yan Liu, Hong Zhou, Hang Su, Chunyan Yang, Jingyan Cheng, Peng Zhang, and Luquan Ren: Mater. Des., 2012, vol. 39, pp. 344–49.10.1016/j.matdes.2012.02.060 ↗
21. X.C. Zhang, B.S. Xu, F.Z. Xuan, Z.D. Wang, and S.T. Tu: Surf. Coat. Technol., 2011, vol. 205, pp. 3119–27.10.1016/j.surfcoat.2010.08.122 ↗
22. S.Y. Buni, N. Raman, and S. Seshan: Sadhana, 2004, vol. 29, pp. 117–27.10.1007/BF02707004 ↗
23. M. Kirchgaßner, E. Badisch, and F. Franek: Wear, 2008, vol. 265, pp. 772–79.10.1016/j.wear.2008.01.004 ↗
24. Ö.N. Doǧan, G. Laird, and J.A. Hawk: Wear, 1995, vol. 181, pp. 342–49.10.1016/0043-1648(94)07056-3 ↗
25. Zhengjun Jing, Hong Zhou, Peng Zhang, Chuanwei Wang, Chao Meng, and Dalong Cong: Appl. Surf. Sci., 2013, vol. 271, pp. 329–36.10.1016/j.apsusc.2013.01.193 ↗
26. Hong Zhou, Peng Zhang, Zhihui Zhang, Wenjun Qiu, Yan Liu, and Luquan Ren: J. Bionic Eng., 2014, vol. 11, pp. 288–95.10.1016/S1672-6529(14)60031-7 ↗