journal article·2017-04

A New Theoretical Approach Based on the Maxwell Model to Obtain Rheological Properties of Solidifying Alloys and Its Validation

Akira Matsushita, Ryosuke Takai, Hideaki Ezaki, Toshimitsu Okane, Makoto Yoshida

Publisher page

Abstract

This paper proposes a new method for obtaining the rheological properties of solidifying alloys in the brittle temperature range (BTR). In that range, alloys show not only rheological, but also brittle behavior. Conventional methods to obtain rheological properties require steady state stress with ductility. Therefore, rheological properties of BTR alloys are unobtainable, or are otherwise including the effects of microscopic damage. The method proposed in this paper uses the stress–strain relation derived from the Maxwell model assuming that strain hardening is negligible in solid-liquid coexistence states. By removing the plastic strain term, the creep strain rate in Norton’s law is derived by the total strain rate and stress rate without the steady state stress condition. Consequently, the stress exponent n and material constant A of Norton’s law can be obtained even for alloys in the BTR. We applied this method to both tensile process before crack initiation and stress relaxation process. According to the Maxwell model, couples of the properties (n and A) obtained in both processes must be equal. Therefore, the difference can validate the obtained properties. From tensile and stress relaxation tests, we obtained the properties of solidifying Al-5 wt pct Mg alloy. We validated results by examining the difference. This report is the first to provide a method to obtain the rheological properties of BTR alloy without damage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Sindo Kou: Acta Mater., 2015, vol. 88, pp. 366-74.10.1016/j.actamat.2015.01.034 ↗
2. S. Suyitno, W. Kool, and L. Katgerman: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2917-26.10.1007/s11661-004-0239-9 ↗
3. B. Magnin, L. Maenner, L. Katgerman, and S. Engler: Mater. Sci. Forum, 1996, vols. 217–222, pp. 1209-14.10.4028/www.scientific.net/MSF.217-222.1209 ↗
4. R. Takai, A. Matsushita, S. Yanagida, K. Nakamura, and M. Yoshida: Mater. Trans., 2015, vol. 56, pp. 1233-41.10.2320/matertrans.L-M2015815 ↗
5. E. Giraud, M. Suery, and M. Coret: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2257-68.10.1007/s11661-010-0268-5 ↗
6. O. Ludwig, J.-M. Drezet, C.L. Martin, and M. Suéry: Metall. Mater. Trans. A, 2004, vol. 36A, pp.1525-35.
7. M. Mabuchi, H. Iwasaki, and K. Higashi: Acta Mater., 1998, vol. 46, pp. 5335-43.10.1016/S1359-6454(98)00223-7 ↗
8. M. Braccini, C.L. Martin, A. Tourabi, Y. Bréchet, and M. Suéry: Mater. Sci. Eng. A, 2002, vol. 337, pp. 1-11.10.1016/S0921-5093(02)00042-4 ↗
9. J.C. Gebelin, M. Suery, and D. Favier: Mater. Sci. Eng. A, 1999, vol. 272, pp. 134-44.10.1016/S0921-5093(99)00467-0 ↗
10. E. Giraud, M. Suéry, and M. Coret: Mater. Sci. Eng. A, 2012, vol. 532, pp. 37-43.10.1016/j.msea.2011.10.059 ↗
11. Y. Chino, M. Kobata, H. Iwasaki, and M. Mabuchi: Acta Mater., 2003, vol. 51, pp. 3309-18.10.1016/S1359-6454(03)00162-9 ↗
12. A.M. de Figueredo, A. Kato, and M.C. Flemings: Metall. Sci. Tech.,2000, vol. 18, pp. 32-36.
13. A Zama, K Toshimitsu, T Watanabe, H Chiba, T Toriyama, and M Yoshida: J. Jpn. Inst. Light Metals, 2011, vol. 61(9), pp. 446-51.10.2464/jilm.61.446 ↗
14. C. Roucoules, P.D. Hodgson, S. Yue, and J.J. Jonas: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 389-400.10.1007/BF02647984 ↗
15. D.G. Eskin, Suyitno, and L. Katgerman: Progr. Mater. Sci., 2004, vol. 49, pp. 629-711.
16. B. Hannart, F. Cialti, and R. Van Schalwijk: Light Metals, TMS-AIME, Warrendale, USA, 1994, pp. 879-87.
17. W.H. Bang, K.H. Oh, J.P. Jung, J.W. Morris, Jr., and F. Hua: J. Electr. Mater., 2005, vol. 34, pp. 1287-300.10.1007/s11664-005-0252-9 ↗
18. C. M. Sellars: Mater. Sci. tech., 1990, vol. 6, pp. 1072-81.10.1179/mst.1990.6.11.1072 ↗
19. C. M. Sellars and J. A. Whiteman: Metal Sci., 1979, vol. 13, pp. 187-94.10.1179/msc.1979.13.3-4.187 ↗
20. A.I.H. Committee, ASM handbook, in: C. Arthur (Ed.) Heat Treating, Asm Intl, Metals Park, 1991, pp. 707-709.
21. S. Oya, M. Ohtaki, M. Kobayashi, and K. Kobayashi: Trans. Japan Inst. Metals, 1986, vol. 27, pp. 623-31.10.2320/matertrans1960.27.623 ↗
22. N. Kasuya, T. Nakazawa, A. Matsushita,T. Okane, and M. Yoshida: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1661-7.10.1007/s11661-016-3353-6 ↗