Analysis of a New High-Toughness Ultra-high-Strength Martensitic Steel by Transmission Electron Microscopy and Atom Probe Tomography
Source abstract
Abstract
The microstructure of a new martensitic high-strength steel (Fe-0.40C-3.81Ni-1.31Cr-1.50Si-0.75Mn-0.52Mo-0.51Cu-0.30V) with high fracture toughness is characterized by transmission electron microscopy and atom probe tomography (APT). MC, M6C, and M23C6 precipitates form inside the martensitic lath matrix. The fracture toughness is insensitive to the dissolution of M23C6 precipitates at austenitizing temperatures above 1164 K (891 °C). APT reveals that solute segregation at the prior austenite grain boundaries (PAGB) is not uniform, with C, Mo, Si, Ni, and/or P enrichment varying at different areas of the PAGB. Si depletion is detected in the same area as the highest C enrichment. Carbon also segregates at lath boundaries. Segregation of C indicates the presence of retained austenite films at both PAGB and lath boundaries. Regions enriched in C up to 10 pct were found within the laths; however, no regions were enriched to the level expected of cementite or e-carbide. The observed C distribution and high fracture toughness indicates that the tempering behavior is significantly different than that observed in 300M steel. The effect of Si, Ni, and Cu on the formation and stabilization of the regions of C enrichment and retained austenite require further study, as it may be key to the increased toughness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. [1] Y. Tomita: Mater. Sci. Technol., 1991, vol. 7, pp. 481–89.10.1179/mst.1991.7.6.481 ↗
2. [2] M. G. Hebsur: J. Mater. Energy Syst., 1982, vol. 4, pp. 28–37.10.1007/BF02833379 ↗
3. [3] Y. Tomita: J. Mater. Sci., 1993, vol. 28, pp. 853–59.10.1007/BF00400864 ↗
4. Carpenter Technology Corporation: AerMet 100 Alloy Technical Data Sheet, 1995.
5. G. Malakondaiah, M. Srinivas, and P. RamaRao: Prog. Mater. Sci., 1997, vol. 42, pp. 209–42.10.1016/S0079-6425(97)00016-9 ↗
6. A.K. Sinha: Physical Metallurgy Handbook, 1st, McGraw-Hill Professional, New York, 2002.
7. K. Sato: University of California, Berkeley, 2002.
8. [8] Raghavan Ayer and P. M. Machmeier: Metall. Mater. Trans. A, 1996, vol. 27, pp. 2510–17.10.1007/BF02652345 ↗
9. [9] R. Veerababu, R. Balamuralikrishnan, K. Muraleedharan, and M. Srinivas: Metall. Mater. Trans. A, 2007, vol. 39, pp. 1486–95.
10. KB Lee and H Kwon: Scr. Metall., 1992, vol. 27, pp. 1355–60.10.1016/0956-716X(92)90083-Q ↗
11. [11] S.S. Bhatnagar, B.K. Guha, and R.K. Sinha: J. Mater. Sci., 1979, vol. 14, pp. 1631–40.10.1007/BF00569283 ↗
12. [12] J.L. Youngblood and M. Raghavan: Metall. Trans. A, 1977, vol. 8A, pp. 1439–48.10.1007/BF02642857 ↗
13. [13] Albert B. Smith: Adv. Mater. Process., 1992, vol. 141, pp. 51–52.
14. [14] Ronald Schnitzer, Michael Schober, Silvia Zinner, and Harald Leitner: Acta Mater., 2010, vol. 58, pp. 3733–41.10.1016/j.actamat.2010.03.010 ↗
15. [15] R.E. Smallman and AHW Ngan: Physical Metallurgy and Advanced Materials, Seventh, Butterworth-Heinemann, 2007.
16. NS Lim, CW Bang, S Das, HW Jin, R Ayer, and CG Park: Metal. Mater. Int., 2012, vol. 18, pp. 87–94.10.1007/s12540-012-0011-4 ↗
17. [17] B. Mintz: Metall. Mater. Trans. A, 1997, vol. 28, pp. 2073–84.10.1007/s11661-997-0164-9 ↗
18. [18] B.C. Kim, S. Lee, D.Y. Lee, and N.J. Kim: Metall. Trans. A, 1991, vol. 22A, pp. 1889–92.10.1007/BF02646515 ↗
19. [19] M. Lunika: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1997–2003.10.1016/j.msea.2009.11.048 ↗
20. [20] Y He, K Yang, W Qu, F Kong, and G Su: Mater. Lett., 2002, vol. 56, pp. 763–69.10.1016/S0167-577X(02)00610-9 ↗
21. [21] D. Delagnes, P. Lamesle, M.H. Mathon, N. Mebarki, and C. Levaillant: Mater. Sci. Eng. A, 2005, vol. 394, pp. 435–44.10.1016/j.msea.2004.11.050 ↗
22. [22] A. G. Allten and P. Payson: Trans. Am. Soc. Met., 1953, vol. 45, pp. 498–532.
23. [23] C. J. Altstetter, M. Cohen, and B. L. Averbach: Trans. Am. Soc. Met., 1962, vol. 55, pp. 287–300.
24. C.H. Shih, B.L. Averbach, and M. Cohen: Some Effects of Silicon on the Mechanical Properties of High-Strength Steels, 1955.
25. [25] P Lejček, V Paidar, and M Koutník: Scr. Metall., 1988, vol. 22, pp. 1379–82.10.1016/S0036-9748(88)80004-8 ↗
26. [26] P Lejček, S Hofmann, Fe- Si Alloy, and P Lejeek: Surf. Interface Anal., 1990, vol. 16, pp. 1–6.
27. [27] ED Hondros and MP Seah: Scr. Metall., 1972, vol. 6, pp. 1007–10012.10.1016/0036-9748(72)90162-7 ↗
28. [28] K. Shibata, S.J. Seo, M. Kaga, H. Uchino, A. Sasanuma, K. Asakura, and C. Nagasaki: Mater. Trans., 2002, vol. 43, pp. 292–300.10.2320/matertrans.43.292 ↗
29. [29] Michael S. Gagliano and Morris E. Fine: Metall. Mater. Trans. A, 2004, vol. 35, pp. 2323–29.10.1007/s11661-006-0212-x ↗
30. [30] Motohiro Yuasa and Mamoru Mabuchi: J. Phys. Condens. Matter, 2010, vol. 22, pp. 5705–11.10.1088/0953-8984/22/50/505705 ↗
31. [31] M.K. Miller and R.G. Forbes: Mater. Charact., 2009, vol. 60, pp. 461–69.10.1016/j.matchar.2009.02.007 ↗
32. ML Taheri, JT Sebastian, BW Reed, DN Seidman, and AD Rollett: Ultramicroscopy, 2010, vol. 110, pp. 278–84.10.1016/j.ultramic.2009.11.006 ↗
33. [33] Gunter Petzow: Metallographic Etching, 2nd ed., ASM International, Materials Park, OH, 1999.
34. DB Williams, CB Carter: Transmission Electron Microscopy—A Textbook for Materials Science, 2nd ed., Springer, New York, 2009.10.1007/978-0-387-76501-3 ↗
35. [35] D R G Mitchell: Microsc. Res. Tech., 2008, vol. 71, pp. 588–93.10.1002/jemt.20591 ↗
36. [36] David N. Seidman: Annu. Rev. Mater. Res., 2007, vol. 37, pp. 127–58.10.1146/annurev.matsci.37.052506.084200 ↗
37. [37] Thomas F. Kelly and Michael K. Miller: Rev. Sci. Instrum., 2007, vol. 78, p. 031101.10.1063/1.2709758 ↗
38. MI Hartshorne, D Isheim, DN Seidman, and ML Taheri: Ultramicroscopy, 2014, vol. 147, pp. 25–32.10.1016/j.ultramic.2014.05.005 ↗
39. [39] M Phaneuf: Micron, 1999, vol. 30, pp. 277–88.10.1016/S0968-4328(99)00012-8 ↗
40. [40] Joseph H. Bunton, Jesse D. Olson, Daniel R. Lenz, and Thomas F. Kelly: Microsc. Microanal., 2007, vol. 13, pp. 418–27.10.1017/S1431927607070869 ↗
41. [41] K Kuo and C Jia: Acta Metall., 1985, vol. 33, pp. 991–96.10.1016/0001-6160(85)90193-2 ↗
42. [42] Tae-Ho Lee, Sung-Joon Kim, and Yun-Chul Jung: Metall. Mater. Trans. A, 2000, vol. 31, pp. 1713–23.10.1007/s11661-998-0332-6 ↗
43. [43] Y Yazawa, T Furuhara, and T Maki: Acta Mater., 2004, vol. 52, pp. 3727–36.10.1016/j.actamat.2004.04.027 ↗
44. [44] A. Výrostková, A. Kroupa, J. Janovec, and M. Svoboda: Acta Mater., 1998, vol. 46, pp. 31–38.10.1016/S1359-6454(97)00238-3 ↗
45. [45] Fujio Abe: Sci. Technol. Adv. Mater., 2008, vol. 9, p. 013002.10.1088/1468-6996/9/1/013002 ↗
46. B Peng, HH Zhang, J Hong, J Gao, and Q Wang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1957–61.10.1016/j.msea.2009.12.039 ↗
47. [47] J Janovec, M Svoboda, A Vyrostkova, and A Kroupa: Mater. Sci. Eng. A, 2005, vol. 402, pp. 288–93.10.1016/j.msea.2005.04.048 ↗
48. [48] B Weiss and R Stickler: Metall. Trans., 1972, vol. 3, pp. 851–66.10.1007/BF02647659 ↗
49. [49] M.H. Lewis and B. Hattersley: Acta Metall., 1965, vol. 13, pp. 1159–68.10.1016/0001-6160(65)90053-2 ↗
50. [50] F.R. Bekitt and B.R. Clark: Acta Metall., 1967, vol. 15, pp. 113–29.10.1016/0001-6160(67)90159-9 ↗
51. [51] H Hong, B Rho, and S Nam: Mater. Sci. Eng. A, 2001, vol. 318, pp. 285–92.10.1016/S0921-5093(01)01254-0 ↗
52. [52] R Padmanabhan and W Wood: Mater. Sci. Eng., 1984, vol. 66, pp. 125–43.10.1016/0025-5416(84)90175-7 ↗
53. [53] H. Djebaili, H. Zedira, A. Djelloul, and A. Boumaza: Mater. Charact., 2009, vol. 60, pp. 946–52.10.1016/j.matchar.2009.03.007 ↗
54. F Pan, P Ding, A Tang, M Hirohashi, Y Lu, and DV Edmonds: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2757–66.10.1007/s11661-004-0222-5 ↗
55. [55] Xiaodan Zhang, Wei Liu, Dale Sun, and Youguo Li: Metall. Mater. Trans. A, 2007, vol. 38, pp. 499–505.10.1007/s11661-006-9071-8 ↗
56. [56] L Dobrzanski, J Mazurkiewicz, and E Hajduczek: J. Mater. Process. Technol., 2004, vol. 157-158, pp. 472–84.10.1016/j.jmatprotec.2004.07.107 ↗
57. [57] George H. Emmons and Wendell S. Williams: J. Mater. Sci., 1983, vol. 18, pp. 2589–2602.10.1007/BF00547575 ↗
58. [58] J. Janovec, M. Svoboda, A. Kroupa, and A. Výrostková: J. Mater. Sci., 2006, vol. 41, pp. 3425–33.10.1007/s10853-006-6744-7 ↗
59. [59] F. Habrovec, J. Skarek, and P. Rys: Mater. Sci. Eng., 1975, vol. 21, pp. 93–105.10.1016/0025-5416(75)90203-7 ↗
60. [60] Christoph Lerchbacher, Silvia Zinner, and Harald Leitner: Micron, 2012, vol. 43, pp. 818–26.10.1016/j.micron.2012.02.005 ↗
61. C Zhu, A Cerezo, and GDW Smith: Ultramicroscopy, 2009, vol. 109, pp. 545–52.10.1016/j.ultramic.2008.12.007 ↗
62. [62] Donald H. Sherman, Steven M. Cross, Sangho Kim, Fernande Grandjean, Gary J. Long, and Michael K. Miller: Metall. Mater. Trans. A, 2007, vol. 38, pp. 1698–1711.10.1007/s11661-007-9160-3 ↗
63. [63] G. B. Olson and Morris Cohen: Metall. Trans. A, 1983, vol. 14, pp. 1057–65.10.1007/BF02670444 ↗
64. KA Taylor, L Chang, GB Olson, GDW Smith, M Cohen, and JB Vander Sande: Metall. Trans. A, 1989, vol. 20, pp. 2717–37.10.1007/BF02670166 ↗
65. [65] M. K. Miller, P. A. Beaven, and G. D. W. Smith: Metall. Trans. A, 1981, vol. 12, pp. 1197–1204.10.1007/BF02642333 ↗
66. [66] M. K. Miller, P. A. Beaven, S. S. Brenner, and G. D W Smith: Metall. Trans. A, 1983, vol. 14, pp. 1021–24.
67. [67] G. Badinier, C.W. Sinclair, X. Sauvage, X. Wang, V. Bylik, M. Gouné, and F. Danoix: Mater. Sci. Eng. A, 2015, vol. 638, pp. 329–39.10.1016/j.msea.2015.04.088 ↗
68. [68] M. Sarikaya, G. Thomas, J.W. Steeds, S.J. Barnard, and G.D.W. Smith: Solute-Element Partitioning and Austenite Stabilization in Steels (LBL-13099), Berkeley, California, 1982.10.2172/7031961 ↗
69. [69] D Isheim, S Vaynman, M Fine, and D Seidman: Scr. Mater., 2008, vol. 59, pp. 1235–38.10.1016/j.scriptamat.2008.07.045 ↗
70. [70] H.K.D.H. Bhadeshia and R.W.K. Honeycombe: Steels: Microstructure and Properties, Third, Butterworth-Heinemann, Jordan Hill, GBR, 2006.
71. [71] I. Lemay and L.M. Schetky: Copper in Iron and Steel, John Wiley and Sons Inc., New York, 1982.
72. [72] Yoshiyuki Tomita: Metall. Mater. Trans. A, 1988, vol. 19A, pp. 2513–21.10.1007/BF02645479 ↗
73. [73] Y. Tomita and T. Okawa: J. Soc. Mater. Sci. Japan, 1995, vol. 44, pp. 438–44.
74. [74] Yoshiyuki Tomita: Metall. Trans. A, 1991, vol. 22, pp. 1093–1102.10.1007/BF02661103 ↗
75. [75] E. Kozeschnik and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 2008, vol. 24, pp. 343–47.10.1179/174328408X275973 ↗
76. D. Isheim, R. PrakashKolli, ME Fine, and DN Seidman: Scripta Mater., 2006, vol. 55, pp. 35–40.10.1016/j.scriptamat.2006.02.040 ↗
77. M. R. Krishnadev and A. Galjbois: Metall. Trans. A, 1975, vol. 6, pp. 222–24.10.1007/BF02673694 ↗
78. S.K Dhua, A. Ray, and DS Sarma: Mater. Sci. Eng. A, 2001, vol. 318, pp. 197–210.10.1016/S0921-5093(01)01259-X ↗
79. [79] S. K. Dhua, D. Mukerjee, and D. S. Sarma: Metall. Mater. Trans. A, 2003, vol. 34, pp. 2493–2504.10.1007/s11661-003-0009-0 ↗
80. [80] W. T. Nachtrab and Y. T. Chou: J. Mater. Sci., 1984, vol. 19, pp. 2136–44.10.1007/BF01058089 ↗
81. WC Leslie: The Physical Metallurgy of Steels, Hemisphere Publishing Corporation, Washington, 1981.