Physically Based Model of the Yield Strength for an Al-Mg-Si-Cu-Zn Alloy
Source abstract
Abstract
The aim of this work is to implement recently developed modeling approaches to predict the mechanical behavior of a precipitation-hardened Al-Mg-Si-Cu-Zn alloy. Assuming that precipitates act as weak or strong obstacles to dislocation motion, a yield strength model, originally introduced for AA6111 alloy, is used to derive the precipitate strengthening formulations. The application of the model provides accurate predictions for the evolution of yield strength of the alloy during artificial aging. The transition point, at which shearable precipitates become non-shearable ones, has been identified directly from the result of tensile tests of AA6011(m) samples at different stages of artificial aging using work-hardening rate model. The linear/non-linear behavior of work-hardening rate of AA6011(m) samples at different stages of artificial aging is also studied. It is explained that high dynamic recovery rate in presence of non-shearable precipitates causes the non-linear work-hardening behavior of massively overaged sample. The modeling results for underaged samples show better agreement with measured values of yield strength when the weak obstacle model has been implemented, while strong obstacle model shows relatively good agreement between the experimental and calculated results for the peak-aged and overaged samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A. J. E. Foreman, M. J. Makin, Philosophical Magazine 1966, 14, 911–24.10.1080/14786436608244762 ↗
2. V. Gerold, “Dislocations in Solids”, North Holland Publ. Co., Amsterdam, The Netherlands, 1979. pp. 219–60.
3. A. N. Kolmogorov, Izv. Akad. Nauk. USSR. Ser Mathemat 1937, 1, 335–45.
4. I. M. Lifshitz, V. V. Slyozov, Journal of Physics and Chemistry of Solids 1961, 19, 35–50.10.1016/0022-3697(61)90054-3 ↗
5. E. Nembach, “Particle Strengthening of Metals and Alloys”, John Wiley and Sons, New York, 1997.
6. H. R. Shercliff, M. F. Ashby, Acta Metallurgica et Materialia 1990, 38, 1789–802.10.1016/0956-7151(90)90291-N ↗
7. H. R. Shercliff, M. F. Ashby, Acta Metallurgica et Materialia 1990, 38, 1803–12.10.1016/0956-7151(90)90292-O ↗
8. U. F. Kocks, H. Mecking, Progress in Materials Science 2003, 48, 171–273.10.1016/S0079-6425(02)00003-8 ↗
9. A. Ardell, Metallurgical and Materials Transactions A 1985, 16, 2131–65.10.1007/BF02670416 ↗
10. M.F. Ashby: Strengthening Methods in Crystals, A. Kelly and R.B. Nicholson, Eds., Wiley, New York, 1971, pp. 137–92.
11. S. Esmaeili, D. J. Lloyd, W. J. Poole, Acta Materialia 2003, 51, 2243–57.10.1016/S1359-6454(03)00028-4 ↗
12. X. Wang, J. Embury, W. Poole, S. Esmaeili, D. Lloyd, Metallurgical and Materials Transactions A 2003, 34, 2913–24.10.1007/s11661-003-0191-0 ↗
13. A. Deschamps, Y. Brechet, Acta Materialia 1998, 47, 293–305.10.1016/S1359-6454(98)00296-1 ↗
14. L. M. Brown, R. K. Ham, “Strengthening Methods in Crystals”, John Wiley & Sons Inc., New York, 1971.
15. A. Serizawa, T. Sato, W. J. Poole, Philosophical Magazine Letters 2010, 90, 279–87.10.1080/09500831003633231 ↗
16. S. Esmaeili: Ph.D. Thesis, University of British Columbia, Vancouver, 2002.
17. S. Esmaeili, X. Wang, D. Lloyd, W. Poole, Metallurgical and Materials Transactions A 2003, 34, 751–63.
18. F. Fazeli, W. J. Poole, C. W. Sinclair, Acta Materialia 2008, 56, 1909–18.10.1016/j.actamat.2007.12.039 ↗
19. W. J. Poole, X. Wang, D. J. Lloyd, J. D. Embury, Philosophical Magazine 2005, 85, 3113–35.10.1080/14786430500154935 ↗
20. L. Cheng, W. Poole, J. Embury, D. Lloyd, Metallurgical and Materials Transactions A 2003, 34, 2473–81.10.1007/s11661-003-0007-2 ↗
21. P. Sepehrband, S. Esmaeili, Scripta Materialia 2010, 63, 4–7.10.1016/j.scriptamat.2009.12.007 ↗
22. S. Esmaeili, L. M. Cheng, A. Deschamps, D. J. Lloyd, W. J. Poole, Materials Science and Engineering A 2001, 319-321, 461–65.10.1016/S0921-5093(01)01113-3 ↗
23. S. Esmaeili, D. J. Lloyd, Acta Materialia 2005, 53, 5257–71.10.1016/j.actamat.2005.08.006 ↗
24. S. Esmaeili, D. J. Lloyd, Materials Characterization 2005, 55, 307–19.10.1016/j.matchar.2005.07.007 ↗
25. S. Esmaeili, D. J. Lloyd, W. J. Poole, Acta Materialia 2003, 51, 3467–81.10.1016/S1359-6454(03)00167-8 ↗
26. ASM International: ASTM B209M-14, Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric), ASM International, West Conshohocken, 2014.
27. Y.-h. Cai, C. Wang, J.-s. Zhang, Int J Miner Metall Mater 2013, 20, 659–64.10.1007/s12613-013-0780-x ↗
28. M. X. Guo, G. Sha, L. Y. Cao, W. Q. Liu, J. S. Zhang, L. Z. Zhuang, Materials Chemistry and Physics 2015, 162, 15–19.10.1016/j.matchemphys.2015.07.033 ↗
29. G. B. Burger, A. K. Gupta, P. W. Jeffrey, D. J. Lloyd, Materials Characterization 1995, 35, 23–39.10.1016/1044-5803(95)00065-8 ↗
30. P. Hosseini Benhangi: M.Sc. Thesis, Ferdowsi University of Mashhad, Mashhad, 2011.
31. M. Avrami, J Chem Phys 1939, 7, 1103–12.10.1063/1.1750380 ↗
32. W. A. Johnson, R. F. Mehl, Trans AIME 1939, 135, 416–28.
33. C. Wagner, Z. Elektrochem 1961, 65, 581–94.
34. D. J. Chakrabarti, D. E. Laughlin, Progress in Materials Science 2004, 49, 389–410.10.1016/S0079-6425(03)00031-8 ↗
35. A. Perovic, D. D. Perovic, G. C. Weatherly, D. J. Lloyd, Scripta Materialia 1999, 41, 703–08.10.1016/S1359-6462(99)00204-3 ↗
36. G. Fribourg, Y. Bréchet, A. Deschamps, A. Simar, Acta Materialia 2011, 59, 3621–35.10.1016/j.actamat.2011.02.035 ↗
37. M. Vivas, P. Lours, C. Levaillant, A. Couret, M. J. Casanove, A. Coujou, Materials Science and Engineering A 1997, 234-236, 664–67.10.1016/S0921-5093(97)00274-8 ↗