Evolution of Deformation and Recrystallization Textures in High-Purity Ni and the Ni-5 at. pct W Alloy
Source abstract
Abstract
An attempt has been made to study the evolution of texture in high-purity Ni and Ni-5 at. pct W alloy prepared by the powder metallurgy route followed by heavy cold rolling (~95 pct deformation) and recrystallization. The deformation textures of the two materials are of typical pure metal or Cu-type texture. Cube-oriented ( $$ \left\{ {00 1} \right\}\left\langle { 100} \right\rangle $$ ) regions are present in the deformed state as long thin bands, elongated in the rolling direction (RD). These bands are characterized by a high orientation gradient inside, which is a result of the rotation of the cube-oriented cells around the RD toward the RD-rotated cube ( $$ \left\{ {0 1 3} \right\}\left\langle { 100} \right\rangle $$ ). Low-temperature annealing produces a weak cube texture along with the $$ \left\{ {0 1 3} \right\}\left\langle { 100} \right\rangle $$ component, with the latter being much stronger in high-purity Ni than in the Ni-W alloy. At higher temperatures, the cube texture is strengthened considerably in the Ni-W alloy; however, the cube volume fraction in high-purity Ni is significantly lower because of the retention of the $$ \left\{ {0 1 3} \right\}\left\langle { 100} \right\rangle $$ component. The difference in the relative strengths of the cube, and the $$ \left\{ {0 1 3} \right\}\left\langle { 100} \right\rangle $$ components in the two materials is evident from the beginning of recrystallization in which more $$ \left\{ {0 1 3} \right\}\left\langle { 100} \right\rangle $$ -oriented grains than near cube grains form in high-purity Ni. The preferential nucleation of the near cube and the $$ \left\{ {0 1 3} \right\}\left\langle { 100} \right\rangle $$ grains in these materials seems to be a result of the high orientation gradients associated with the cube bands that offer a favorable environment for early nucleation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Advanced materials and composites · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219-74.10.1016/S0921-5093(97)00424-3 ↗
2. I.L. Dillamore and H. Katoh: Metal. Sci., 1974, vol. 8, pp. 73-83.10.1179/msc.1974.8.1.73 ↗
3. H.E. Vatne, R. Shahani, and E. Nes: Acta Metall. Mater., 1996, vol. 44, pp. 4447-62.10.1016/1359-6454(96)00077-8 ↗
4. H.E. Vatne, T. Furu, and E. Nes: Mater. Sci. Technol., 1996, vol. 12, pp. 201-10.10.1179/mst.1996.12.3.201 ↗
5. A. Goyal, A.M.P. Paranthaman, and U. Schoop: Mater. Res. Bull., 2004, vol. 29, pp. 552-61.10.1557/mrs2004.161 ↗
6. D. Dimos, P. Chaudhari, J. Mannhart, and F.K. Legoues: Phys. Rev. Lett., 1988, vol. 61, pp. 219-22.10.1103/PhysRevLett.61.219 ↗
7. P.P. Bhattacharjee, R.K. Ray, and A. Upadhyaya: Scripta Mater., 2005, vol. 53, 1477-81.10.1016/j.scriptamat.2005.08.003 ↗
8. K.T. Kim, J.H. Lim, J.H. Kim, S.H. Jang, J. Joo, C.J. Kim, K.J. Song, and H.S. Shin: IEEE Appl. Supercon., 2005, vol. 15, 2683-86.10.1109/TASC.2005.847777 ↗
9. H.J. Bunge: Mathernatische Methoden der Textur‐Analyse, Academic Press, Berlin, Germany, 1969.
10. N. Hansen, D.J. Jensen, and T. Philos: Roy. Soc. A, 1999, vol. 357, pp. 1447-69.10.1098/rsta.1999.0384 ↗
11. D.A. Hughes and N. Hansen: Philos. Mag., 2003, vol. 83, pp. 3871-93.10.1080/14786430310001605560 ↗
12. S. Wright and D.J. Field: Advanced Software Capabilities for Automated EBSD, Academic/Plenum Publishers, New York, NY, 2000.
13. X.L. Li, W. Liu, A. Godfrey, D.J. Jensen, and Q. Liu: Acta Mater., 2007, vol. 55, pp. 3531-40.10.1016/j.actamat.2007.02.005 ↗
14. A.A. Ridha and W.B. Hutchinson: Acta Metall., 1982, vol. 30, pp. 1929-39.10.1016/0001-6160(82)90033-5 ↗
15. S. Zaefferer, S.T. Baudin, and R. Penelle: Acta Mater., 2001, vol. 49, pp. 1105-22.10.1016/S1359-6454(00)00387-6 ↗
16. H. Klein and H.J. Bunge: Advances and Applications of Quantitative Texture Analysis, Butterworths, London, UK, 1989.
17. Y. Zhou, L.S. Toth, and K.W. Neale: Acta Metall. Mater., 1992, vol. 40, pp. 3179-93.10.1016/0956-7151(92)90481-S ↗
18. L.S. Toth, K.W. Neale, and J.J. Jonas: Acta Metall. Mater., 1989, vol. 37, pp. 2197-2210.10.1016/0001-6160(89)90145-4 ↗
19. K.W. Neale, L.S. Toth, and J.J. Jonas: Int. J. Plast., 1990, vol. 6, 45-61.10.1016/0749-6419(90)90029-E ↗
20. M. Matsuo: ISIJ Int., 1989, vol. 29, pp. 809-27.10.2355/isijinternational.29.809 ↗
21. H. Chang and I. Baker: Mater. Sci. Eng. A, 2008, vol. 476, pp. 46-59.10.1016/j.msea.2007.04.097 ↗
22. J. Hirsch and K. Lucke: Acta Metall. Mater., 1988, vol. 36, pp. 2863-82.10.1016/0001-6160(88)90172-1 ↗
23. J. Hirsch and K. Lucke: Acta Metall. Mater., 1988, vol. 36, pp. 2883-904.10.1016/0001-6160(88)90173-3 ↗
24. J. Hirsch, K. Lucke, and M. Hatherly: Acta Metall. Mater., 1988, vol. 36, pp. 2905-27.10.1016/0001-6160(88)90174-5 ↗
25. T. Kamijo, H. Adachihara, and H. Fukutomi: Acta Metall. Mater., 1993, vol. 41, pp. 975-85.10.1016/0956-7151(93)90032-N ↗
26. J. Hjelen, R. Orsund, and E. Nes: Acta Metall. Mater., 1991, vol. 39, pp. 1377-1404.10.1016/0956-7151(91)90225-P ↗
27. P.P. Bhattacharjee, R.K. Ray, and N. Tsuji: Acta Metall. Mater., 2009, vol. 57, 2166-79.10.1016/j.actamat.2009.01.015 ↗