journal article·2004-11

Effect of Sn on microstructure and mechanical properties of Ti-base dendrite/ultrafine-structured multicomponent alloys

G. He, M. Hagiwara, J. Eckert

Publisher page

Abstract

Ti57−x Cu15Ni14Sn4+x Nb10 (x = 0, 5, or 10) alloys were prepared by copper mold casting. At Sn = 4 at. pct, a dendrite/ultrafine-structured multicomponent alloy was obtained, which exhibits 1271 MPa yield strength, 77 GPa Young’s modulus, and 2 pct plasticity at room temperature for 3-mm-diameter samples. The cooling rate significantly affects the as-cast microstructure and the mechanical properties. For 5-mm-diameter samples, the alloy exhibits 1226 MPa yield strength, 63 GPa Young’s modulus, and 2.5 pct plasticity. At Sn = 9 at. pct, Ti-, Sn-, and Nb-rich particles precipitate primarily. This near-hypereutectic alloy composition leads to the precipitation of intermetallics, which deteriorate the mechanical properties and result in the coexistence of ductile and brittle fracture mechanisms. At Sn = 14 at. pct, the alloy composition is completely in the intermetallic region, thus inducing the formation of Ti2Cu, Ti2Ni, and Ti3Sn intermetallics. The alloy becomes very brittle because the intermetallic compounds dominate the fracture process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Quasicrystal Structures and Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. G. He, J. Eckert, W. Löser, and L. Schultz: Nature Mater., 2003, vol. 2, pp. 33–37.10.1038/nmat792 ↗
2. G. He, W. Löser, and J. Eckert: Acta Mater., 2003, vol. 51, pp. 5223–34.10.1016/S1359-6454(03)00386-0 ↗
3. J. Eckert, G. He, J. Das, and W. Löser: Mater. Trans., 2003, vol. 44, pp. 1999–2006.10.2320/matertrans.44.1999 ↗
4. T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak: Binary Alloy Phase Diagrams, 2nd ed., William W. Scott, Jr., 1992, pp. 1416, 1440, 1485, 2128, 2788, and 3441.
5. Q.L. Dai, B.B. Sun, G. He, Y. Li, J. Eckert, W.K. Luo, E. Ma, and M.L. Sui: J. Mater. Res., 2004, vol. 19, pp. 2557–66.10.1557/JMR.2004.0332 ↗
6. G. He, W. Löser, J. Eckert, and L. Schultz: J. Mater. Res., 2002, vol. 17, pp. 3015–18.10.1557/JMR.2002.0439 ↗
7. G. He, J. Eckert, W. Löser, and M. Hagiwara: Acta Mater., 2004, vol. 52, pp. 3035–46.10.1016/j.actamat.2004.03.006 ↗
8. T. Zhang and A. Inoue: Mater. Trans. JIM, 1998, vol. 39, pp. 1001–06.10.2320/matertrans1989.39.1001 ↗
9. Y.C. Kim, W.T. Kim, and D.H. Kim: Mater. Trans. JIM, 2002, vol. 43, pp. 1243–46.10.2320/matertrans.43.1243 ↗
10. D.H. Bae, H.K. Lim, S.H. Kim, D.H. Kim, and W.T. Kim: Acta Mater., 2002, vol. 50, pp. 1749–59.10.1016/S1359-6454(02)00024-1 ↗
11. G. He, J. Eckert, and W. Löser: Acta Mater., 2003, vol. 51, pp. 1621–31.10.1016/S1359-6454(02)00563-3 ↗
12. H. Jones: Mater. Lett., 1996, vol. 26, pp. 133–36.10.1016/0167-577X(95)00213-8 ↗
13. I. Ohnaka and T. Fukusako: Trans. Iron Steel Inst. Jpn., 1981, vol. 21, pp. 485–94.10.2355/isijinternational1966.21.485 ↗
14. R.M. Srivastava, J. Eckert, W. Löser, B.K. Dhindaw, and L. Schultz: Mater. Trans., 2002, vol. 43, pp. 1670–75.10.2320/matertrans.43.1670 ↗
15. A. Inoue, A. Kato, T. Zhang, S.G. Kim, and T. Masumoto: Mater. Trans. JIM, 1991, vol. 32, pp. 609–16.10.2320/matertrans1989.32.609 ↗
16. G. He, J. Eckert, W. Löser, and M. Hagiwara: Solid State Commun., 2004, vol. 129, pp. 711–15.10.1016/j.ssc.2003.12.026 ↗
17. R. Busch, E. Bakke, and W.L. Johnson: Acta Mater., 1998, vol. 46, pp. 4725–32.10.1016/S1359-6454(98)00122-0 ↗
18. M. Heilmaier: J. Mater. Process. Tech., 2001, vol. 117, pp. 374–80.10.1016/S0924-0136(01)00782-8 ↗
19. D. Suh and R.H. Dauskardt: Annales Chim. Sci. Matér., 2002, vol. 27, pp. 25–40.10.1016/S0151-9107(02)80042-3 ↗
20. Z.F. Zhang, J. Eckert, and L. Schultz: Acta Mater., 2003, vol. 51, pp. 1167–79.10.1016/S1359-6454(02)00521-9 ↗
21. G. He, J. Eckert, W. Löser, and L. Schultz: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1591–1601.10.1007/s11661-004-0265-7 ↗