journal article·2007-03

Understanding Grain Growth and Pore Elimination in Vacuum-Plasma-Sprayed Titanium Alloy

H. R. Salimi Jazi, T. W. Coyle, J. Mostaghimi

Publisher page

Abstract

In the present study, grain growth, pore elimination, and densification of the vacuum-plasma-sprayed structure of Ti-6Al-4V alloy were investigated. The near-net-shaped formed components were deposited using a vacuum plasma spraying process. The as-sprayed specimens were heat treated at 1040 °C (50 °C above the β transus temperature) for up to 1440 minutes in an inert gas atmosphere. The apparent density of the as-sprayed and heat-treated samples was determined by the water displacement method. The theoretical density of the heat-treated samples was calculated from lattice parameters and phase compositions determined using X-ray diffraction (XRD). Densification of the heat-treated specimens at a given temperature and time was determined. Results revealed that the density initially increased sharply with isothermal heat treatment time and then reached a plateau. During short heat treatment times, the grains grow quickly within individual splats at a rate consistent with intrinsic boundary mobilities. For longer heat treatment times, the grain boundary mobility was limited by pore drag, and the grain growth rate was reduced. The pore and grain sizes increased with increasing isothermal heat treatment time up to about 17 and 100 μm, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. H.R. Salimijazi, T.W. Coyle, J. Mostaghimi, L. Leblanc: J. Thermal Spray Technol., 2005, vol. 14(2), pp. 215–2210.1361/10599630523773 ↗
2. H.R. Salimijazi, T.W. Coyle, J. Mostaghimi, and L. Leblanc: in Thermal Spray 2003, Advancing the Science and Applying the Technology, B.R. Marple and C. Moreau, eds., Orlando, FL, 2003, pp. 611–1610.31399/asm.cp.itsc2003p0611 ↗
3. L. Leblanc, H.R. Salimijazi, J. Mostaghimi, and T.W. Coyle: in Thermal Spray 2003, Advancing the Science and Applying the Technology, B.R. Marple and C. Moreau, eds., Orlando, FL, 2003, pp. 603–0910.31399/asm.cp.itsc2003p0603 ↗
4. Y. Takayama, N. Furushiro, T. Tozawa, H. Kato, and Y. Umakoshi: in Titanium ‘92, Science and Technology, F.H. Fores and I. Caplan, eds., TMS, Warrendale, PA, 1993, pp. 635–43
5. S.P. Fox: in Titanium ‘92, Science and Technology, F.H. Fores and I. Caplan, eds., TMS, Warrendale, PA, 1993, pp. 769–76
6. S. Mishra, T. DebRoy: Acta Mater., 2004, vol. 52, pp. 1183–92410.1016/j.actamat.2003.11.003 ↗
7. F.J. Gil, P. Tarin, and J.A. Planell: in Titanium ‘92, Science and Technology, F.H. Fores and I. Caplan, eds., TMS, Warrendale, PA, 1993, pp. 777–84
8. Annual Book of ASTM Standards, Section 2: Metallic and Inorganic Coatings, Metal Powder, Sintered P/M Structural Parts, S.J. Bailey et al., eds., ASTM International, West Conshohocken, PA, 2003, vol. 02.05, pp. 86–89
9. General Profile and Structure Analysis Software for Powder Diffraction Data, Topas V 2.1, Bruker AXS, Karlsruhe, Germany, 2002
10. E.E. Aigeltinger and J.P. Drolet: Modern Developments in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1974, vol. 6, pp. 323–41
11. W. Kraus, G. Nolze: PowderCell V 2.3-Beta, Federal Institute for Materials Research and Testing, Berlin, Germany, 1999
12. J. Zhao and M.P. Harmer: J. Am. Ceram. Soc., 1988, vol. 71 (7)10.1111/j.1151-2916.1988.tb05916.x ↗
13. M.W. Barsoum: Fundamentals of Ceramics, McGraw-Hill, New York, NY, 1997, pp. 331–90
14. D. Gouvea, R.H.R. Castro: Appl. Surf. Sci., 2003, vol. 217 (1–4), pp. 194–20110.1016/S0169-4332(03)00539-7 ↗
15. W.Y. Shih, W.H. Shih, I.A. Aksay: J. Mater. Res., 1995, vol. 10 (4), pp. 1000–1510.1557/JMR.1995.1000 ↗
16. R.M. German: Powder Metallurgy Science, 2nd ed., Metal Powder Industries Federation, Princeton, NJ, 1994, pp. 127–300
17. Materials Properties Handbook: Titanium Alloys, R. Boyer, G. Welsch, and E.W. Collings, eds., ASM INTERNATIONAL, The Materials International Society, Materials Park, OH, 1998, pp. 125–26
18. H.R. Salimijazi, T.W. Coyle, J. Mostaghimi, Vacuum Plasma Spraying: A New Concept for Manufacturing Ti-6Al-4V Structures, JOM, TMS, Warrendale, PA, Sept. 2006, pp. 50–56