Kinetic Analyses of the Growth and Dissolution Phenomena of Primary Si and α-Al in Partially Molten Al-Si (-Cu-Mg) Alloy Particles Using In Situ Transmission Electron Microscopy
Source abstract
Abstract
The growth and dissolution behavior of primary Si and α-Al in partially molten hypereutectic Al-Si–based alloy particles was investigated using in situ TEM to reveal the dynamic and instantaneous processes occurring during these phenomena. Direct evidence for the preferential growth of Si {113} facets compared with {111} facets resulting in prominent {111} facets bounding the Si crystals was obtained. The nucleation of primary Si was found to occur heterogeneously on the encapsulating alumina shell, whereas the α-Al phase nucleated homogeneously from the liquid Al-Si phase. The morphology of primary Si during growth was found to be highly faceted during growth but smoothly curved during dissolution, revealing fundamental mechanistic differences during these processes. We provide a ledge-based interpretation to explain the difference in growth and dissolution behavior. The α-Al phase displayed smoothly curved growth and dissolution morphologies, which are characteristic of an isotropic interfacial energy and a continuous growth mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. W.A. Tiller: The Science of Crystallization, Cambridge University Press, Cambridge, UK, 1991.10.1017/CBO9780511623158 ↗
2. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, NY, 1974.
3. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans Tech Publications, Aedermannsdorf, Switzerland, 1989.
4. D. T. J. Hurle: Handbook of Crystal Growth, Elsevier, New York, NY, 1993.
5. M. Glicksman: Diffusion in Solids, Wiley Interscience, New York, NY, 1999.
6. D. Stefanescu: Science and Engineering of Casting Solidification, Springer, New York, NY, 2002.10.1007/978-1-4757-6472-7 ↗
7. M. Elmadagli and A.T. Alpas: Wear, 2006, vol. 261, pp. 823-34.10.1016/j.wear.2006.01.025 ↗
8. R.E. Napolitano, H. Meco, and C. Jung: JOM, 2004, vol. 56, no. 4, pp. 16-21.10.1007/s11837-004-0067-9 ↗
9. Y.E. Kalay, L.S. Chumbley, I.E. Anderson, and R.E. Napolitano: Metall. Mater. Trans. A., 2007, vol. 38A, pp. 1452-57.10.1007/s11661-007-9168-8 ↗
10. M. Hillert: Metall. Mater. Trans. A., 2003, vol. 34A, pp. 2688-90.10.1007/s11661-003-0030-3 ↗
11. J.M. Dowling, J.M. Corbett, and H.W. Kerr: J. Mater. Sci., 1987, vol. 22, 4504-13.10.1007/BF01132053 ↗
12. R. Wang, W. Lu, and L.M. Hogan: Metall. Mater. Trans. A, 1997, vol. 28A, 1233-43.10.1007/s11661-997-0289-x ↗
13. Valimet, Inc., Stockton, CA, 2004, http://www.valimet.com/.
14. G.A. Storaska and J.M. Howe: Mater. Sci. Eng. A, 2004, vol. A368, pp. 183-90.10.1016/j.msea.2003.10.315 ↗
15. T. Yokota, J.M. Howe, and M. Murayama: Phys. Rev. Lett., 2003, vol. 91, pp. 265504.10.1103/PhysRevLett.91.265504 ↗
16. R. Oshima, F. Hori, M. Komatsu, and H. Mori: Jpn. J. Appl. Phys., 1998, vol. 37, pp. 1430-32.10.1143/JJAP.37.L1430 ↗
17. W.E. King, G.H. Campbell1, A. Frank1, B. Reed, J.F. Schmerge, B.J. Siwick, B.C. Stuart, and P.M. Weber: J. Appl. Phys., 2005, vol. 97, p. 111101.10.1063/1.1927699 ↗
18. A.K. Tan, C.K. Ong, and H.S. Tan: Semicond. Sci. Technol., 1988, vol. 3, pp. 1-5.10.1088/0268-1242/3/1/001 ↗
19. A.G. Cullis, N.G. Chew, H.C. Webber, and D.J. Smith: J. Cryst. Growth, 1984, vol. 68, pp. 624-38.10.1016/0022-0248(84)90469-X ↗
20. T. Abe: J. Cryst. Growth, 1974, vol. 24/25, pp. 463-67.10.1016/0022-0248(74)90358-3 ↗
21. C. Hayzelden and J.L. Batstone: MRS Symp. Proc., 1994, vol. 321, pp. 579-84.10.1557/PROC-321-579 ↗
22. R. Sinclair: MRS Bull., 1994, vol. 19, no. 6, p. 26.10.1557/S088376940003671X ↗
23. T.B. Massalski, W.A. Soffa, and D.E. Laughlin: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 825-31.10.1007/s11661-006-0055-5 ↗
24. X. Zhang, D. Wang, and C. Yao: J. Mater. Sci. Lett., 2002, vol. 21, pp. 921-22.10.1023/A:1016013420793 ↗
25. R.F. Sekerka: Cryst. Res. Tech., 2005, vol. 40, nos. 4/5, pp. 291-306.10.1002/crat.200410342 ↗
26. J.M. Bermond, J.J. Metois, X. Egea, and F. Floret: Surf. Sci., 1995, vol. 330, pp.48-60.10.1016/0039-6028(95)00230-8 ↗
27. D. Turnbull, R.E. Cech: J. Appl. Phys., 1950, vol. 21, pp. 804-10.10.1063/1.1699763 ↗
28. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, CRC Press, Boca Raton, FL, 2004.
29. G.A. Storaska, K.T. Moore, and J.M. Howe: Philos. Mag. A, 2004, vol. 84, pp. 2619-34.10.1080/14786430410001671395 ↗