journal article·2005-03

Development of Mo(Si,Al)2-base oxidation-resistant coating on Nb-base structural materials

Tatsuo Tabaru, Jin-Hak Kim, Kazuhisa Shobu, Michiru Sakamoto, Hisatoshi Hirai, Shuji Hanada

Publisher page

Abstract

Mo(Si,Al)2-base oxidation-resistant coatings for Nb-base structural materials have been studied. The coating is composed of a Mo(Si,Al)2-base Al reservoir and Al2O3 interlayer to suppress interface reactions between the Al reservoir and the substrate. To develop a suitable Al-reservoir material, some Mo(Si0.6,Al0.4)2-HfB2 composites were prepared. Their oxidation resistance and coefficients of thermal expansion were investigated, in addition to their chemical reactivity with the Nb substrate at high temperatures. As a result, Mo(Si0.6,Al0.4)2-20 vol pct HfB2 was selected as one of the satisfactory Al reservoirs. The introduction of a stable Al2O3 interlayer was attempted using a novel powder metallurgical process to overlay the Nb substrates with the Al reservoir, where the Nb substrates were subjected to a slight surface oxidation prior to the coating process. The Nb specimens, which are thoroughly coated with the Al reservoir and Al2O3 interlayer, can be successfully fabricated by this method. The coated Nb specimens are not damaged at all after prolonged exposure in flowing Ar-20 pct O2 at 1673 K for 120 hours. Furthermore, the Al2O3 interlayer is very effective and no reactions occur at the interface. Thus, this Mo(Si,Al)2-base oxidation-resistant coating is applicable to Nb. The utility of the coating system is also confirmed for a NbSS/Nb5Si3 composite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. C. English: Niobium, AIME, Warrendale, PA, 1984, pp. 239–324.
2. H. Inoue: Niobium, AIME, Warrendale, PA, 1984, pp. 615–36.
3. R.T. Begley: Evolution of Refractory Metals and Alloys, TMS, Warrendale, PA, 1994, pp. 29–48.
4. E. Miura, K. Yoshimi, and S. Hanada: Phys. Status Solidi A, 2001, vol. 185, pp. 357–72.10.1002/1521-396X(200106)185:2<357::AID-PSSA357>3.0.CO;2-9 ↗
5. M. Fujikura, A. Kasama, R. Tanaka, and S. Hanada: Mater. Trans., 2004, vol. 45, pp. 493–501.10.2320/matertrans.45.493 ↗
6. M.G. Mendiratta, J.J. Lewandowski, and D.M. Dimiduk: Metall. Trans. A, 1991, vol. 22A, pp. 1573–83.10.1007/BF02667370 ↗
7. D.L. Davidson, K.S. Chan, and D.L. Anton: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3007–18.10.1007/BF02663850 ↗
8. B.P. Bewlay, M.R. Jackson, and H.A. Lipsitt: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3801–08.10.1007/BF02595629 ↗
9. B.P. Bewlay, M.R. Jackson, and H.A. Lipsitt: Acta Metall. Mater., 1994, vol. 42, pp. 2869–78.10.1016/0956-7151(94)90228-3 ↗
10. T. Tabaru and S. Hanada: Intermetallics, 1998, vol. 6, pp. 735–39.10.1016/S0966-9795(98)00052-1 ↗
11. T. Tabaru and S. Hanada: Intermetallics, 1999, vol. 7, pp. 807–19.10.1016/S0966-9795(98)00130-7 ↗
12. T. Tabaru and S. Hanada: 3rd Pacific Rim Int. Conf. on Advanced Materials and Processing (PRICM3), TMS, Warrendale, PA, 1998, pp. 537–42.
13. H. Hirai, T. Tabaru, J. Sha, H. Ueno, A. Kitahara, and S. Hanada: MRS Symp. Proc., 2001, vol. 646, pp. N.5.41.1-N.5.41.6.10.1557/PROC-646-N5.41.1 ↗
14. J. Sha, H. Hirai, T. Tabaru, H. Ueno, A. Kitahara, and S. Hanada: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 85–94.10.1007/s11661-003-0210-1 ↗
15. J.H. Kim, T. Tabaru, H. Hirai, A. Kitahara, and S. Hanada: Scripta Mater., 2003, vol. 48, pp. 1439–44.10.1016/S1359-6462(03)00084-8 ↗
16. J.H. Kim, T. Tabaru, M. Sakamoto, and S. Hanada: Mater. Sci. Eng. A, 2004, vol. A372, pp. 137–44.10.1016/j.msea.2003.12.010 ↗
17. M.P. Brady, B. Gleeson, and I.G. Wright: JOM, 2002, Jan., pp. 16–21.
18. K.S. Chan: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 589–97.10.1007/s11661-004-0370-7 ↗
19. A.K. Vasudevan and J.J. Petrovic: Mater. Sci. Eng. A, 1992, vol. A155, pp. 1–17.10.1016/0921-5093(92)90308-N ↗
20. T. Goto and H. Homma: J. Eur. Ceram. Soc., 2002, vol. 22, pp. 2749–56.10.1016/S0955-2219(02)00139-5 ↗
21. M.W. Brumm and H.J. Grabke: Corr. Sci., 1992, vol. 33, pp. 1677–90.10.1016/0010-938X(92)90002-K ↗
22. E.C. Dickey, B.A. Pint, K.B. Alexander, and I.G. Wright: J. Mater. Res., 1999, vol. 14, pp. 4531–40.10.1557/JMR.1999.0615 ↗
23. K. Hansson, J.E. Svensson, M. Halvarsson, J.E. Tang, M. Sundberg, and R. Pompe: Mater. Sci. Forum, 2001, vols. 369-372, pp. 419–26.10.4028/www.scientific.net/MSF.369-372.419 ↗
24. P.J. Meschter: Metall. Trans. A, 1992, vol. 23A, pp. 1763–72.10.1007/BF02804369 ↗
25. T. Tabaru, K. Shobu, M. Sakamoto, and S. Hanada: Intermetallics, 2004, vol. 12, pp. 33–41.10.1016/j.intermet.2003.07.002 ↗
26. T. Maruyama and K. Yanagihara: Mater. Sci. Eng. A, 1997, vols. A239-A240, pp. 828–41.10.1016/S0921-5093(97)00673-4 ↗
27. A. Stergiou, P. Tsakiropoulos, and A. Brown: Intermetallics, 1997, vol. 5, pp. 69–81.10.1016/S0966-9795(96)00068-4 ↗
28. H. Inui, M. Moriwaki, K. Itoh, and M. Yamaguchi: Phil. Mag., 1998, vol. 77, pp. 375–94.10.1080/014186198254489 ↗
29. M. Nanko, A. Kitahara, T. Ogura, H. Kamata, and T. Maruyama: Intermetallics, 2001, vol. 9, pp. 637–46.10.1016/S0966-9795(01)00053-X ↗
30. C.E. Ramberg and W.L. Worrell: J. Am. Ceram. Soc., 2002, vol. 85, pp. 444–52.10.1111/j.1151-2916.2002.tb00109.x ↗
31. P.V. Krakhmalev, E. Ström, M. Sundberg, and C. Li: Mater. Lett., 2003, vol. 57, pp. 3387–91.10.1016/S0167-577X(03)00080-6 ↗
32. T. Tabaru, K. Shobu, H. Hirai, and S. Hanada: Intermetallics, 2003, vol. 11, pp. 721–33.10.1016/S0966-9795(03)00072-4 ↗
33. T. Tabaru, K. Shobu, M. Sakamoto H. Hirai, and S. Hanada: Scripta Mater., 2003, vol. 49, pp. 767–72.10.1016/S1359-6462(03)00436-6 ↗
34. Heat-Resistant Materials, ASM INTERNATIONAL, Materials Park, OH, 1997, pp. 335–44.
35. D. Sciti, S. Guicciardi, C. Melandri, and A. Bellosi: J. Am. Ceram. Soc., 2003, vol. 86, pp. 1720–26.10.1111/j.1151-2916.2003.tb03546.x ↗
36. M.M. Opeka, I.G. Talmy, E.J. Wuchina, J.A. Zaykoski, and S.J. Causey: J. Eur. Ceram. Soc., 1999, vol. 19, pp. 2405–14.10.1016/S0955-2219(99)00129-6 ↗
37. G.J. Zhang, X.M. Yue, and T. Watanabe: J. Mater. Sci., 2000, vol. 35, pp. 4729–33.10.1023/A:1004811308556 ↗
38. A. Mueller, G. Wang, and R.A. Rapp: Mater. Sci. Eng. A, 1992, vol.A155, pp. 199–207.10.1016/0921-5093(92)90326-V ↗
39. L. Shaw and R. Abbaschian: J. Am. Ceram. Soc., 1995, vol. 78, pp. 3376–82.10.1111/j.1151-2916.1995.tb07980.x ↗
40. M. Matsubara and S. Hanada: J. Jpn. Inst. Met., 1999, vol. 63, pp. 112–17 (in Japanese).10.2320/jinstmet1952.63.1_112 ↗
41. D. Monceau and B. Pieraggi: Oxid. Met., 1998, vol. 50, pp. 477–93.10.1023/A:1018860909826 ↗