journal article·2002-12

On the influence of N on residual microstrain in cryomilled Ni

Kyung H. Chung, Entrique J. Lavernia

Publisher page

Abstract

The factors that influence the development of residual microstrain during milling in a liquid nitrogen atmosphere, defined hereafter as cryomilling, are investigated. The residual microstrains in cryomilled Ni, processed under various cryomilling conditions, were examined by X-ray diffraction (XRD) and analyzed through the single line approximation (SLA) method. The average residual microstrains are determined to be in the range of 2×10−3 to 6×10−3. The residual microstrain on the (200) plane is higher than those on the other planes by 33 pct. The residual microstrain and its anisotropy in Ni are reduced after heat treatment at 800 °C for 1 hour. The measured microstrain is proposed to evolve from the presence of N and O as impurity atoms in the Ni lattice. Both N and O are introduced from the environment and then their solubility in Ni is enriched via the generation of defects that occurs during cryomilling. The stable site for N and O atoms in Ni is the octahedral site, and the sizes of N and O atoms exceed those of the octahedral site of Ni by 48 and 16 pct respectively. Accordingly, a lattice strain field is expected around interstitial N atoms that are located at octahedral sites. By comparing the crystal structure around the octahedral site, the stable site for impurity N atoms, in the Ni lattice with that of Ni3N structure, the lattice strains are estimated to be in the range of 5 to 15 pct. The result shows that the (200) plane has strains that are 2 times higher than those in other planes, and this is argued to be the reason for the measured anisotropy of residual strain in Ni after cryomilling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. C. Suryanarayana: Int. Mater. Res., 1995, vol. 40, pp. 41–64.
2. T. Mütschele and R. Kirchheim: Scripta Metall. Mater., 1987, vol. 21, pp. 1101–04.10.1016/0036-9748(87)90258-4 ↗
3. H. Gleiter: Progr. Mater. Sci., 1989, vol. 33, pp. 223–315.10.1016/0079-6425(89)90001-7 ↗
4. A. Inoue: Mater. Sci. Eng., 1994, vols. A179–A180, pp. 57–61.10.1016/0921-5093(94)90164-3 ↗
5. R.O. Hughes, S.D. Smith, C.S. Pande, H.R. Johnson, and R.W. Armstrong: Scripta Metall. Mater., 1997, vol. 20, pp. 93–97.10.1016/0036-9748(86)90219-X ↗
6. Z.G. Li and D.J. Smith: Appl. Phys. Lett., 1989, vol. 55, pp. 919–21.10.1063/1.101622 ↗
7. K. Lu, W.D. Wei, and J.T. Wang: Scripta Metall. Mater., 1990, vol. 24, pp. 2319–23.10.1016/0956-716X(90)90086-V ↗
8. B.H. Kear and P.R. Sputt: NanoStruct. Mater., 1995, vol. 6, pp. 227–36.10.1016/0965-9773(95)00046-1 ↗
9. C.C. Koch: NanoStruct. Mater., 1993, vol. 2, pp. 109–29.10.1016/0965-9773(93)90016-5 ↗
10. J. Thompson and C. Politis: Europhys. Lett., 1987, vol. 3, pp. 199–205.10.1209/0295-5075/3/2/012 ↗
11. P.H. Shingu, B. Huang, S.R. Nishitan, and S. Nasu: Suppl. Trans. Jpn. Inst. Mater., 1988, vol. 29, pp. 3–10.
12. C.C. Koch: NanoStruct. Mater., 1997, vol. 9, pp. 13–22.10.1016/S0965-9773(97)00014-7 ↗
13. H.J. Frecht: NanoStruct. Mater., 1995, vol. 6, pp. 33–42.10.1016/0965-9773(95)00027-5 ↗
14. M.J. Luton, C.S. Jayauth, M.M. Disko, S. Matras, and J. Vallone: Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1989, vol. 132, pp. 79–86.
15. T.R. Malow and C.C. Koch: Acta Mater., 1997, vol. 45, pp. 2177–86.10.1016/S1359-6454(96)00300-X ↗
16. H.G. Jiang, M. Rühle, and E.J. Lavernia: J. Mater. Res., 1999, vol. 14, pp. 549–59.10.1557/JMR.1999.0079 ↗
17. J. Rawers and D. Cook: Nanostruct. Mater., 1999, vol. 11, pp. 331–42.10.1016/S0965-9773(99)00049-5 ↗
18. C. Goujon, P. Goeuriot, M. Chedru, J. Vicens, J.L. Chenmart, F. Bernard, J.C. Niepce, P. Verdier, and Y. Laurent: Powder Technol., 1999, vol. 105, pp. 328–36.10.1016/S0032-5910(99)00155-2 ↗
19. X. Zhang, H. Wang, M. Kassem, J. Narayan, and C.C. Koch: J. Mater. Res., 2001, vol. 16, pp. 3485–95.10.1557/JMR.2001.0479 ↗
20. F. Zhou, J. Lee, and E.J. Lavernia: Scripta Metall. Mater., 2001, vol. 44, pp. 1287–90.10.1016/S1359-6462(01)00746-1 ↗
21. C. Goujon, P. Geouriot, P. Delcroix, and G. Le Caër: J. Alloys Compounds, 2001, vol. 315, pp. 276–83.10.1016/S0925-8388(00)01303-7 ↗
22. E. Hellstern, H.J. Fecht, Z. Fu, and W.L. Johnson: J. Appl. Phys., 1989, vol. 65, pp. 305–10.10.1063/1.342541 ↗
23. D. Oleszak and P.H. Shingu: J. Appl. Phys., 1996, vol. 79, pp. 2975–80.10.1063/1.361294 ↗
24. R.J. Perez, B. Huang, and E.J. Lavernia: Nanostr. Mater., 1996, vol. 7, pp. 565–72.10.1016/0965-9773(96)00020-7 ↗
25. C. Barrett and T.B. Massalski: Structure of Metals, 3rd ed., Pergamon Press, Elmsford, NY, 1980, p. 37.
26. J. Lee, F. Zhou, K.H. Chung, N.J. Kim, and E.J. Lavernia: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 3109–15.10.1007/s11661-001-0185-8 ↗
27. X. Zhang, H. Wang, J. Narayan, and C.C. Koch: Acta Mater., 2001, vol. 49, pp. 1319–26.10.1016/S1359-6454(01)00051-9 ↗
28. R. Birringer: Mater. Sci. Eng., 1989, vol. A117, pp. 33–43.10.1016/0921-5093(89)90083-X ↗
29. K.H. Chung, J. Lee, R. Rodriguez, and E.J. Lavernia: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 125–34.10.1007/s11661-002-0011-y ↗
30. P. Knauth, A. Charal, and P. Gas: Scripta Metall. Mater., 1993, vol. 28, pp. 325–30.10.1016/0956-716X(93)90436-V ↗
31. J. Eckert, J.C. Holzer, and W.L. Johnson: J. Appl. Phys., 1993, vol. 73, pp. 2794–2802.10.1063/1.353055 ↗
32. H.J. Höffler and R.S. Averback: Scripta Metall. Mater., 1990, vol. 24, pp. 2401–06.10.1016/0956-716X(90)90101-L ↗
33. T.H. de Keijser, J.I. Langford, E.J. Mittemeijer, and A.B.P. Vogels: J. Appl. Crystallogr., 1982, vol. 15, pp. 308–14.10.1107/S0021889882012035 ↗
34. J.I. Langford: J. Appl. Crystallogr., 1978, vol. 11, pp. 10–14.10.1107/S0021889878012601 ↗
35. M.L. Lau and E.J. Lavernia: Mater. Sci. Eng., 1999, vol. A272, pp. 222–29.10.1016/S0921-5093(99)00476-1 ↗
36. C. Suryanarayana: Progr. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
37. C.C. Koch, O.B. Carn, C.G. McKaney, and J.O. Scarbrough: Appl. Phys. Lett., 1983, vol. 43, 1017–1019.10.1063/1.94213 ↗
38. L.R. Barrett, W.D. Nix, and A.S. Tetelman: The Principles of Engineering Materials, Prentice-Hall, Englewood Cliffs, NJ, 1980, p. 237.
39. E.A. Brandes and G.B. Brook: Smithels Metals Reference Book, 7th ed., Butterworth-Hernemann Ltd., Oxford, United Kingdom, 1992, pp. 4–41.
40. W. McClune: Powder Diffraction File Alphabetical Index, Inorganic Phases, JCPDS International Center for Diffraction Data, Swarthmore, PA, 1988.
41. T.B. Massalski: Binary Phase Diagrams, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 1990.
42. E.A. Brandes and G.B. Brook: Smithels Metals Reference Book, 7th ed., Butterworth-Heremann Ltd., Oxford, United Kingdom, 1992, pp. 13–109.