journal article·2005-03

Chlorination treatment to improve the oxidation resistance of Nb-Mo-Si-B alloys

Vikas Behrani, Andrew J. Thom, Matthew J. Kramer, Mufit Akinc

Publisher page

Abstract

Recent studies have shown that the quaternary Nb-Mo-Si-B system is not oxidation resistant. The difference in oxidation resistance between Mo-Si-B and Nb-Mo-Si-B may be interpreted in terms of the volatility of the metal oxide that forms. MoO3 evaporates from the surface scale at about 650 °C, leaving a porous borosilicate glassy scale. Nb2O5 persists as a rapidly growing condensed phase that overwhelms the ability of the borosilicate glass to form a protective layer. In the present work, a novel chlorination process was employed to selectively remove Nb2O5 from the scale of the quaternary alloy as volatile NbCl5. A Nb-Mo-Si-B alloy was studied with a nominal composition of 63(Nb,Mo)-30Si-7B (at. pct) with Nb/Mo = 1:1. The alloy consisted of a three-phase microstructure of (Nb,Mo)5Si3B x (T1)-(Nb,Mo)5(Si,B)3 (T2)-(Nb,Mo)5Si3B x (D88). The oxidation behavior of these alloys in air was studied both before and after chlorination. Results showed that Nb2O5 can be selectively removed from the scale to leave a borosilicate-rich scale, which then forms a dense scale after heat treatment at 1100 °C in argon. The oxidation rate of the chlorinated alloy was about one-third that of the unchlorinated alloy under identical conditions. Alloy oxidation during heating to the test temperature was studied, and a plausible mechanism for the formation of porosity in the oxide scale has been offered.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. M.K. Meyer and M. Akinc: J. Am. Ceram. Soc., 1996, vol. 79 (4), pp. 938–44.10.1111/j.1151-2916.1996.tb08528.x ↗
2. M.K. Meyer and M. Akinc: J. Am. Ceram. Soc., 1996, vol. 79 (10), pp. 2763–66.10.1111/j.1151-2916.1996.tb09046.x ↗
3. M.K. Meyer, M.J. Kramer, and M. Akinc: Intermetallics, 1996, vol. 4, pp. 273–81.10.1016/0966-9795(95)00048-8 ↗
4. Y.H. Liu, A.J. Thom, M.J. Kramer, and M. Akinc: in Processing and Fabrication of Advanced Materials-XI, T.S. Srivatsan and V.A. Ravi, eds., ASM INTERNATIONAL, Materials Park, OH, 2003, pp. 258–71.
5. V. Behrani, A.J. Thom, M.J. Kramer, and M. Akinc: Intermetallics, in press.
6. Y. Liu, M.J. Kramer, A.J. Thom, and M. Akinc: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 601–07.
7. C.L. Fu and J.H. Schneibel: Acta Mater., 2003, vol. 51, pp. 5083–92.10.1016/S1359-6454(03)00358-6 ↗
8. C.L. Fu and X. Wang: Phil. Mag. Lett., 2000, vol. 80, pp. 683–90.10.1080/09500830050143787 ↗
9. J.H. Schneibel, C.J. Rawn, T.R. Watkins, and E.A. Payzant: Phys. Rev. B, 2002, vol. 65, pp. 134112-1–134112-5.10.1103/PhysRevB.65.134112 ↗
10. F. Chu, D.J. Thoma, K. McClellan, P. Peralta, and Y. He: Intermetallics, 1999, vol. 7, pp. 611–20.10.1016/S0966-9795(98)00059-4 ↗
11. H.L. Zhao, M.J. Kramer, and M. Akinc: Intermetallics, 2004, vol. 12, pp. 493–98.10.1016/j.intermet.2004.01.005 ↗
12. F. Fairbrother: The Chemistry of Niobium and Tantalum, Elsevier Pub. Co., New York, NY, 1967, pp. 115–20.
13. K.M. Alexander and F. Fairbrother: J. Chem. Soc., 1949, pp. S223–S227.10.1039/jr949000s223 ↗
14. F. Fairbrother, A.H. Cowley, and N. Scott: J. Less-Common Met., 1959, vol. 1, pp. 206–14.10.1016/0022-5088(59)90029-3 ↗
15. L. Freitas and F. Ajersch: Chem. Eng. Commun., 1984, vol. 30, pp. 19–33.10.1080/00986448408911113 ↗
16. I. Gaballah, E. Allain, and M. Djona: Min. Met. Mater. Soc., 1992, pp. 759–64.
17. J.J. Huebsch: Master’s Thesis, Iowa State University, Ames, IA, 1998.
18. M.K. Meyer: Ph.D. Thesis, Iowa State University, Ames, IA, 1995.
19. B.B. Argent and B. Phelps: “Niobium, Tantalum, Molybdenum, and Tungsten,” Report of a Conference Held at the University of Sheffield, Sept. 20–22, 1960, A.G. Quarrell, ed., Elsevier Pub. Co., New York, NY, 1961, pp. 198–207.
20. D.A. Prokoshkin, E.V. Vasil’eva, and A.M. Ryabshev: Issled. Po Zharoproch. Splavam, Akad. Nauk SSSR, Inst. Met., 1963, vol. 10, pp. 233–39.
21. D.A. Prokoshkin, E.V. Vasil’eva, and A.M. Ryabshev: Issled. Po Zharoproch. Splavam, Akad. Nauk SSSR, Inst. Met., 1963, vol. 10, pp. 233–39.
22. N.P. Bansal and R.H. Doremus: Handbook of Glass Properties, Academic Press, Inc., New York, NY, 1986, pp. 288–89.
23. J. Schlichting: J. Non-Crystalline Solids, 1984, vol. 63, pp. 173–81.10.1016/0022-3093(84)90396-X ↗
24. F.W. Wohlbier: Diff. Defect Data, 1977, vol. 14, pp. 129–31.
25. F.W. Wohlbier: Diff. Defect Data, 1978, vol. 17, pp. 132–33.
26. J.F. Moulder, W.F. Stickle, P.E. Sobol, and K.D. Bomben: Handbook of X-ray Photoelectron Spectroscopy, Perkin-Elmer Corporation, Physical Electronics Division, Eden Prairie, MN, 1992, pp. 215, 230–32, 238.