Correlation of Microstructure with Hardness and Wear Resistance of (Cr3C2,CrB)/Steel Surface Alloyed Materials Fabricated by High-Energy Electron Beam Irradiation
Source abstract
Abstract
The correlation of microstructure with the hardness and wear resistance of (Cr3C2,CrB)/steel surface alloyed materials fabricated using high-energy electron beam irradiation was investigated in this study. Two kinds of powder mixtures, 50Cr3C2-50STS304 and 50CrB-50STS304 (wt pct), were placed on a plain carbon steel substrate, which was then irradiated with an electron beam without adding flux. Surface alloyed layers 1.0 to 1.3 mm in thickness were successfully formed without defects; these layers contained a large amount (up to 58 vol pct) of Cr7C3 or Cr1.65Fe0.35B0.96 in the austenite or martensite matrix. Both the hardness and wear resistance of the surface alloyed layer were directly influenced by hard carbides or borides, and were 2 to 3 times greater than those of the steel substrate. Particularly in the surface alloyed material fabricated with CrB and stainless steel powders, selective wear of the matrix was considerably reduced. This was due to the number of fine borides homogeneously distributed in the hard martensite matrix and, in turn, led to excellent wear resistance. These findings suggested that irradiation with a high-energy electron beam was useful in the development of surface alloyed materials with improved hardness and wear resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. J.C. Oh, K. Euh, S. Lee, Y. Koo, N.J. Kim: Scripta Mater., 1998, vol. 39, pp. 1389–9410.1016/S1359-6462(98)00325-X ↗
2. K. Euh, S. Lee, K. Shin: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3143–5110.1007/s11661-999-0225-3 ↗
3. E.S. Park, D.H. Kim: Met. Mater. Int., 2005, vol. 11, pp. 19–2710.1007/BF03027480 ↗
4. E. Rimini: Surface Modification and Alloying by Laser, Ion, and Electron Beams, J.M. Poate, G. Foti, D.C. Jacobson, eds., Plenum Press, New York, NY, 1983, p. 1510.1007/978-1-4613-3733-1_2 ↗
5. N.T. Nhan, P.K. Hung, D.M. Nghiep, T.Q. Thang, H.S. Kim: Met. Mater. Int., 2006, vol. 12, pp. 167–7210.1007/BF03027474 ↗
6. S. Schiller, U. Heisig, S. Panzer: Electron Beam Technology, John Wiley & Sons, VEB Verlag Technik, Berlin, 1982, pp. 29–37
7. K. Euh, S.-H. Choo, S. Lee: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2849–5510.1007/BF02830354 ↗
8. K.S. Lee, Y.W. Chang: Met. Mater. Int., 2005, vol. 11, pp. 53–5710.1007/BF03027484 ↗
9. L.E. Toth: Transition Metal Carbides and Nitrides, Academic Press, New York, NY, 1971, pp. 1–28
10. J. Kwon, Y.C. Kim, K.B. Kim, Y.K. Lee, E. Fleury: Met. Mater. Int., 2006, vol. 12, pp. 207–1210.1007/BF03027532 ↗
11. L. Davis: An Introduction to Welding Fluxes for Mild and Low Carbon Steels, The Welding Institute, Ablington Hall, Cambridge, United Kingdom, 1981, pp. 1–16
12. C.E. Jackson: W.R.C. Bull., 1977, vol. 190, pp. 1–25
13. A. Sandt: Surf. J. Int., 1986, vol. 1, pp. 133–37
14. M. Bauccio: ASM Engineered Materials Reference Book, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 1994, p. 301
15. G. Petzow: Metallographic Etching, ASM, Metals Park, OH, 1976, p. 65
16. ASTM Standard Practice for Conducting Dry Sand/Rubber Wheel Abrasion Tests, ASTM G65-85, ASTM, Philadelphia, PA, 1985
17. S.-H. Choo, S. Lee, S.-J. Kwon: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3131–4110.1007/s11661-999-0224-4 ↗
18. W.L. Song, P.D. Zhu, K. Cui: Surf. Coat. Technol., 1996, vol. 80, pp. 279–8210.1016/0257-8972(95)02470-0 ↗
19. PCPDFWIN version 1.10, ICDD, Newtown Square, PA, 1995
20. E. Yun, Y.C. Kim, S. Lee, N.J. Kim: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1029–3810.1007/s11661-004-0029-4 ↗
21. J.C. Oh, S. Lee: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 139–5110.1007/s11661-004-0117-5 ↗
22. K.C. Hwang, S. Lee, H.C. Lee: Mater. Sci. Eng., 1998, vol. A254, pp. 282–9510.1016/S0921-5093(98)00626-1 ↗
23. S.R. Chen, H.A. Davies, W.M. Rainforth: Acta Mater., 1999, vol. 47, pp. 4555–6910.1016/S1359-6454(99)00334-1 ↗
24. M. Bauccio: ASM Engineered Materials Reference Book, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 283–84
25. E. Yun, S. Lee: Surf. Coat. Technol., 2006, vol. 200, pp. 3478–8510.1016/j.surfcoat.2004.11.017 ↗