On the Processing of Martensitic Steels in Continuous Galvanizing Lines: Part II
Source abstract
Abstract
Whereas low-carbon (<0.2 mass pct) martensitic grades can be produced easily in continuous annealing processing lines equipped with the required cooling capacity, the thermal cycles in continuous galvanizing lines make it difficult to produce hot-dip Zn or Zn-alloy coated high-strength martensitic grades. This is because of the tempering processes occurring during dipping of the strip in the liquid Zn bath and, in the case of galvannealed sheet steel, the short thermal treatment required to achieve the alloying between the Zn and the steel. These short additional thermal treatments last less than 30 seconds but severely degrade the mechanical properties. Using a combination of internal friction, X-ray diffraction, and transmission electron microscopy, it is shown that the ultrafine-grained lath microstructure allows for a rapid dislocation recovery and carbide formation during the galvanizing processes. In addition, the effective dislocation pinning occurring during the galvannealing process results in strain localization and the suppression of strain hardening.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. B.C. De Cooman, J.G. Speer, I.Y. Pyshmintsev, and N. Yoshinaga: Materials Design—The Key to Modern Steel Products, GRIPS Media GmbH, Bad Harzburg, 2007, pp. 137–204.
2. J.M. Chilton and P.M. Kelly: Acta Metall., 1968, vol. 16, pp. 637–56.10.1016/0001-6160(68)90137-5 ↗
3. H.K.D.H. Bhadeshia: Bainite in Steels: Transformation, Microstructure and Properties, IOM Communications Ltd., London, 2001, pp. 117–224.
4. S. Khare, K. Lee, and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 922–28.10.1007/s11661-009-0164-z ↗
5. R. Davies: Metall. Trans. A, 1979, vol. 10A, pp. 113–18.10.1007/BF02686414 ↗
6. B.C. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 285–303.10.1016/j.cossms.2004.10.002 ↗
7. G. Melloy, P. Summon, and P. Podgursky: Metall. Trans., 1973, vol. 4, pp. 2279–89.10.1007/BF02669367 ↗
8. T. Hara, H. Asahi, R. Uemori, and H. Tamehiro: ISIJ Int., 2004, vol. 44, pp. 1431–40.10.2355/isijinternational.44.1431 ↗
9. K. Taylor and S. Hansen: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 1697–1708.10.1007/BF02672586 ↗
10. X.M. Wang and X.L. He: ISIJ Int., 2002, vol. 42, pp. S38–S46.10.2355/isijinternational.42.Suppl_S38 ↗
11. W. Cias and D. Doane: Metall. Trans., 1973, vol. 4, pp. 2257–66.10.1007/BF02669365 ↗
12. W. Reynolds, F. Li, C. Shui, and H. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1433–63.10.1007/BF02672561 ↗
13. R. Grange: Metall. Trans., 1973, vol. 4, pp. 2231–44.10.1007/BF02669363 ↗
14. T. Song: Master’s Thesis, Graduate Institute of Ferrous Technology, Pohang University of Science and Technology, Pohang, 2009, pp. 81–90.
15. T. Maki: Proc. 1st Int. Symp. on Steel Science (ISSS 2007), Kyoto, Japan, 2007, pp. 1–10.
16. S.W. Thompson, D.J. Colvin, and G. Krauss: Scripta Metall., 1988, vol. 22, pp. 1069–74.10.1016/S0036-9748(88)80105-4 ↗
17. C.A. Apple, R.N. Caron, and G. Krauss: Metall. Trans., 1974, vol. 5, pp. 593–99.10.1007/BF02644654 ↗
18. H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279–88.10.1016/j.actamat.2005.11.001 ↗
19. S. Morito, X. Huang, T. Furuhara, T. Maki, and N. Hansen: Acta Mater., 2006, vol. 54, pp. 5323–31.10.1016/j.actamat.2006.07.009 ↗
20. M. Watanabe and C.M. Wayman: Metall. Trans., 1971, vol. 2, pp. 2221–27.10.1007/BF02917554 ↗
21. L. Bojarski and T. Bold: Acta Metall., 1974, vol. 22, pp. 1223–34.10.1016/0001-6160(74)90136-9 ↗
22. M.G.H. Wells: Acta Metall., 1964, vol. 12, pp. 389–99.10.1016/0001-6160(64)90009-4 ↗
23. M.X. Zhang and P.M. Kelly: Acta Mater., 1998, vol. 46, pp. 4081–91.10.1016/S1359-6454(98)00046-9 ↗
24. W.C. Leslie, R.M. Fisher, and N. Sen: Acta Metall., 1959, vol. 7, pp. 632–44.10.1016/0001-6160(59)90133-6 ↗
25. D.N. Shackleton and P.M. Kelly: Acta Metall., 1967, vol. 15, pp. 979–92.10.1016/0001-6160(67)90263-5 ↗
26. J. Wu, P.J. Wray, C.I. Garcia, M. Hua, and A.J. Deardo: ISIJ Int., 2005, vol. 45, pp. 254–62.10.2355/isijinternational.45.254 ↗
27. J.C. Shyne and W.D. Nix: Acta Metall., 1965, vol. 13, pp. 869–70.10.1016/0001-6160(65)90151-3 ↗
28. A. Shibata, S. Morito, T. Furuhara, and T. Maki: Scripta Mater., 2005, vol. 53, pp. 597–602.10.1016/j.scriptamat.2005.04.023 ↗
29. M. Takahashi and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1990, vol. 6, pp. 592–603.10.1179/mst.1990.6.7.592 ↗
30. L.C. Chang and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1996, vol. 12, pp. 233–36.10.1179/mst.1996.12.3.233 ↗
31. E. Keehan, L. Karlsson, H.K.D.H. Bhadeshia, and M. Thuvander: Mater. Sci. Technol., 2008, vol. 24, pp. 1183–88.10.1179/174328407X226572 ↗
32. Y. Ohmori, Y.C. Jung, K. Nakai, and H. Shioiri: Acta Mater., 2001, vol. 49, pp. 3149–62.10.1016/S1359-6454(01)00234-8 ↗
33. B.L. Bramfitt and J.G. Speer: Metall. Trans. A, 1990, vol. 21A, pp. 817–29.10.1007/BF02656565 ↗
34. H. Ohtani, S. Okaguchi, Y. Fujishiro, and Y. Ohmori: Metall. Trans. A, 1990, vol. 21A, pp. 877–88.10.1007/BF02656571 ↗
35. P.C.M. Rodrigues, E.V. Pereloma, and D.B. Santos: Mater. Sci. Eng. A, 2000, vol. 283, pp. 136–43.10.1016/S0921-5093(99)00795-9 ↗
36. S.-C. Wang and J.-R. Yang: Mater. Sci. Eng. A, 1992, vol. 154, pp. 43–49.10.1016/0921-5093(92)90361-4 ↗
37. V. Biss and R. Cryderman: Metall. Trans., 1971, vol. 2, pp. 2267–76.10.1007/BF02917559 ↗
38. M.E. Bush and P.M. Kelly: Acta Metall., 1971, vol. 19, pp. 1363–71.10.1016/0001-6160(71)90074-5 ↗
39. J.L. Lee, M.H. Hon, and G.H. Cheng: Scripta Metall., 1987, vol. 21, pp. 293–98.10.1016/0036-9748(87)90216-X ↗
40. S. Liu and G. Zhang: Metall. Trans. A, 1990, vol. 21A, pp. 1509–15.10.1007/BF02672565 ↗
41. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Trans. A, 1990, vol. 21A, pp. 1493–1507.10.1007/BF02672564 ↗
42. M.X. Zhang and P.M. Kelly: Scripta Mater., 2002, vol. 47, pp. 749–55.10.1016/S1359-6462(02)00196-3 ↗
43. Y. Tomita and K. Okabayashi: Metall. Mater. A, 1985, vol. 16A, pp. 73–82.10.1007/BF02656714 ↗
44. C.H. Young and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1994, vol. 10, pp. 209–14.10.1179/mst.1994.10.3.209 ↗
45. W. Jandeska and J. Morral: Metall. Trans., 1972, vol. 3, pp. 2933–37.10.1007/BF02652863 ↗
46. T.B. Cameron and J.E. Morral: Boron in Steel, TMS-AIME, Warrendale, PA, 1979, pp. 61–79.
47. E.J. Shin, B.S. Sung, H.M. Park, D.J. Mun, and G.H. Lee: Proc. 44th Symp. on Steel Technology, Daejeon, Republic of Korea, 2008, pp. 117–39.
48. S. Khare, K. Lee, and H.K.D.H. Bhadeshia: Int. J. Mater. Res., 2009, vol. 100, pp. 1513–20.10.3139/146.110222 ↗
49. C. Mesplont, S. Vandeputte, and B.C. De Cooman: Z. Metallkd., 2002, vol. 93, pp. 1108–18.10.3139/146.021108 ↗
50. C.A. Siebert, D.V. Doane, and D.H. Breen: The Hardenability of Steels—Concepts, Metallurgical Influence and Industrial Applications, ASM, Metals Park, OH, 1977, pp. 72–129.