journal article·2004-03

Effects of an α-Al2O3 thin film on the oxidation behavior of a single-crystal Ni-based superalloy

Y. -F. Su, L. F. Allard, D. W. Coffey, W. Y. Lee

Publisher page

Abstract

A ∼150-nm-thick coating layer consisting of α-Al2O3 as the major phase with a minute amount of Φ-Al2O3 was deposited on the surface of a single-crystal Ni-based superalloy by chemical vapor deposition (CVD). Within 0.5 hours of oxidation at 1150°C, the resulting thermally grown oxide (TGO) formed on the coated alloy surface underwent significant lateral grain growth. Consequently, within this time scale, the columnar nature of the TGO became established. After 50 hours, a network of ridges was clearly observed on the TGO surface instead of equiaxed grains typically observed on the uncoated alloy surface. Comparison of the TGO morphologies observed with and without the CVD-Al2O3 layer suggested that the transient oxidation of the alloy surface was considerably reduced. Also, the CVD-Al2O3 layer significantly reduced the growth rate of the TGO and improved its spallation resistance, while slowing the internal oxidation of Ta-rich areas that were present in the superalloy as-casting defects. These results demonstrated that this thin α-Al2O3 coating could be used as a means of favorably altering the TGO morphology and growth kinetics for no bond coat thermal barrier coating (TBC) applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. P.K. Wright and A.G. Evans: Curr. Opin. Solid State Mater. Sci., 1999, vol. 4, pp. 255–56.10.1016/S1359-0286(99)00024-8 ↗
2. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier, and F.S. Pettit: Progr. Mater. Sci., 2001, vol. 46, pp. 505–53.10.1016/S0079-6425(00)00020-7 ↗
3. V.K. Tolpgy and D.R. Clark: in Elevated Temperature Coatings: Science and Technology IV, N.B. Dahotre, J.M. Hampikian, and J.E. Morral, eds., TMS, Warrendale, PA, 2001, pp. 93–108.10.1002/9781118787694.ch7 ↗
4. W.Y. Lee, D.P. Stinton, C.C. Berndt, F. Erdogan, Y.D. Lee, and Z. Mutasim: J. Am. Ceram. Soc., 1996, vol. 79, pp. 3003–12.10.1111/j.1151-2916.1996.tb08070.x ↗
5. V.K. Tolpgy and D.R. Clarke: in Elevated Temperature Coatings: Science and Technology IV, N.B. Dahotre, J.M. Hampikian, and J.E. Morral, eds., TMS, Warrendale, PA 2001, pp. 93–108.10.1002/9781118787694.ch7 ↗
6. Y. Zang, W.Y. Lee, J.A. Haynes, I.G. Wright, B.A. Pint, K.M. Cooley, and P.K. Liaw: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 679–87.
7. Y. Zhang, J.A. Haynes, W.Y. Lee, I.G. Wright, B.A. Pint, K.M. Cooley, and P.K. Liaw: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1727–41.10.1007/s11661-001-0150-6 ↗
8. W.Y. Lee, Y. Zhang, I.G. Wright, B.A. Pint, an P.K. Liaw: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 833–41.10.1007/s11661-998-0274-z ↗
9. J.A. Haynes, M.K. Ferber, W.D. Porter, and E.D. Rigney: Oxid. Met., 1999, vol. 52, pp. 31–76.10.1023/A:1018870923397 ↗
10. I.G. Wright, B.A. Pint, W.Y. Lee, K.B. Alexander, and K. Prüßner: in High Temperature Surface Engineering, Institute of Materials, London, 2000, pp. 95–113.
11. T.E. Strangman: U.S. Patent 4,880,614, 1990.
12. J.H. Sun, E. Chang, C.H. Chao, and M.J. Cheng: Oxid. Met., 1993, vol. 40, pp. 465–81.10.1007/BF00666387 ↗
13. B.A. Pint, I.G. Wright, W.Y. Lee, Y. Zhang, K. Prüßner, and K.B. Alexander: Mater. Sci. Eng. A, 1998, vol. A245, pp. 201–11.10.1016/S0921-5093(97)00851-4 ↗
14. B.A. Pint: Oxid. Met., 1996, vol. 45, pp. 1–37.10.1007/BF01046818 ↗
15. B.A. Pint, A.J. Garratt-Reed, and L.W. Hobbs: J. Am. Ceram. Soc., 1998, vol. 81, pp. 305–14.10.1111/j.1151-2916.1998.tb02335.x ↗
16. V. Tolpygo: Oxid. Met., 1999, vol. 51, pp. 449–77.10.1023/A:1018839227090 ↗
17. L.M. He, Y.-F. Su, L.F. Allard, M.J. Lance, and W.Y. Lee: Metall. Mater. Trans. A 2004, vol. 35A, pp. 1113–24.
18. Y.-F. Su, M. Torzilli, J.D. Meyer, W.Y. Lee, C. Rawn, M. Lance, and S. Ruppi: in Elevated Temperature Coatings: Science and Technology IV, N.B. Dahotre, J.M. Hampikian, and J.E. Morral, eds., TMS, Warrendale, PA, 2001, pp. 15–28.
19. G.Y. Kim, W.Y. Lee, J.A. Haynes, and T.R. Watkins: Metall. Mater. Trans. A, 2001, vol. 32, pp. 615–24.10.1007/s11661-001-0078-x ↗
20. Y.-F. Su, M.A. Torzilli, J.D. Meyer, C.J. Rawn, M.J. Lance, S. Ruppi, and W.Y. Lee: J. Am. Ceram. Soc., 2002, vol. 85, pp. 2089–96.10.1111/j.1151-2916.2002.tb00409.x ↗
21. H. Hindam and D.P. White: Oxid. Met., 1983, vol. 18, pp. 245–84.10.1007/BF00656571 ↗
22. R. Prescott, D.F. Mitchell, and M.J. Graham: Corrosion, 1994, vol. 50, pp. 62–71.10.5006/1.3293495 ↗
23. K. Messaoudi, A.M. Huntz, and B. Lesage: Mater. Sci. Eng. A, 1998, Vol. A247, pp. 248–62.10.1016/S0921-5093(97)00711-9 ↗
24. J. Balmain, M.K. Loudjani, and A.M. Huntz: Mater. Sci. Eng. A 1997, vol. A 224, pp. 87–100.10.1016/S0921-5093(96)10572-4 ↗
25. Y. Yoshi and W.D. Kingery: J. Chem. Phys., 1960, vol. 35, p. 905.
26. F.A. Golightly, F.H. Stott, and G.C. Wood: J. Electrochem. Soc., 1979, vol. 126, pp. 1035–42.10.1149/1.2129170 ↗
27. V.K. Tolpygo and D.R. Clarke: Mater. High Temp., 2000, vol. 17, pp. 59–70.10.1179/mht.2000.011 ↗
28. G.C. Rybicki and J.L. Smialek: Oxid. Met., 1989, vol. 31, pp. 275–304.10.1007/BF00846690 ↗
29. M.W. Brumm and H.J. Grabke: Corr. Sci., 1992, vol. 33, pp. 677–90.10.1016/0010-938X(92)90002-K ↗
30. D.R. Clarke: Phys. Status Solidi A, 1998, vol. 166, pp. 183–96.10.1002/(SICI)1521-396X(199803)166:1<183::AID-PSSA183>3.0.CO;2-R ↗
31. D.P. Garriga, B.A. Shollock, D.S. McPhail, R.J. Chater, and J.F. Walker: Int. J. Inorg. Mater., 1999, vol. 1, pp. 325–36.10.1016/S1466-6049(99)00047-1 ↗
32. C.V. Thompson: Ann. Rev. Mater. Sci., 1990, vol. 20, pp. 245–68.10.1146/annurev.matsci.20.1.245 ↗
33. J.K. Doychak, T.E. Mitchell, and J.L. Smialek: Mater. Res. Soc. Symp. Proc., 1985, vol. 39, pp. 475–84.10.1557/PROC-39-475 ↗
34. M.J. Stiger, N.M. Yanar, M.G. Topping, F.S. Pettit, and G.H. Meier: Z. Metallkd., 1999, vol. 90, pp. 1069–78.
35. F.A. Elrefaie and W.W. Smeltzer: J. Electrochem. Soc., 1981, vol. 128, pp. 2237–42.10.1149/1.2127225 ↗
36. C.H.P. Lupis: Chemical Thermodynamics of Materials, Prentice-Hall, New York, NY, 1993.
37. E.A.A. Jarvis, A.C. Christensen, and E.A. Carter: Surface Sci., 2001, vol. 487, pp. 55–76.10.1016/S0039-6028(01)01071-8 ↗
38. A. Christensen, E.A. Asche, and E.A. Carter: Adv. Ser. Phys. Chem., 2001, vol. 11, pp. 490–546.10.1142/9789812811882_0010 ↗
39. R. Prescott and M.J. Graham: Oxid. Met., 1992, vol. 38, pp. 233–54.10.1007/BF00666913 ↗