The influence of Sc on thermal stability of a nanocrystalline Al-Mg alloy processed by cryogenic ball milling
Source abstract
Abstract
The microstructural evolution during annealing of a cryogenically ball-milled Al-7.5Mg-0.3Sc (in wt pct) was examined using differential scanning calorimetry and transmission electron microscopy (TEM). The as-milled alloy was a supersaturated fcc solid solution with an average grain size of ∼25 nm and heterogeneous grain morphologies and size distributions. Calorimetric measurements at a constant heating rate of 32 K/min indicated two exothermic events in association with recovery from 100 °C to 240 °C and recrystallization from 300 °C to 450 °C. Prior to recrystallization, the precipitation of Al3Sc may occur at low annealing temperatures producing a nonuniform dispersion of approximately spherical particles with diameters of 4 to 5 nm. Recrystallization gave rise to heterogeneous microstructures with bimodal grain size distributions, which may result from the heterogeneity of microstructure in the as-milled state. The heterogeneous microstructures of the recrystallized Al-Mg-Sc alloy were similar to those observed in the recrystallized Sc-free Al-Mg alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. F.J. Humphreys, P.B. Prangnell, J.R. Bowen, A. Gholinia, and C. Harris: Phil. Trans. R. Soc. London A, 1999, vol. 357, pp. 1663–81.10.1098/rsta.1999.0395 ↗
2. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Progr. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
3. R.Z. Valiev, I.V. Alexandrov, Y.T. Zhu, and T.C. Lowe: J. Mater. Res., 2002, vol. 17, pp. 5–8.10.1557/JMR.2002.0002 ↗
4. Y. Wang, M. Chen, F. Zhou, and E. Ma: Nature, 2002, vol. 419, pp. 912–15.10.1038/nature01133 ↗
5. D. Witkin, Z. Lee, R. Rodriguez, S.R. Nutt, and E.J. Lavernia: Scripta Mater., 2003, vol. 49, pp. 297–302.10.1016/S1359-6462(03)00283-5 ↗
6. Z. Lee, R. Rodriguez, R.W. Hayes, E.J. Lavernia, and S.R. Nutt: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1473–81.10.1007/s11661-003-0259-x ↗
7. B. Han, Z. Lee, D. Witkin, S. Nutt, and E.J. Lavernia: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 957–65.10.1007/s11661-005-0289-7 ↗
8. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon Press, Oxford, United Kingdom, 1996.
9. T.R. Malow and C.C. Koch: Acta Mater., 1997, vol. 45, pp. 2177–86.10.1016/S1359-6454(96)00300-X ↗
10. J.Y. Huang, Y.T. Zhu, H. Jiang, and T.C. Lowe: Acta Mater., 2001, vol. 49, pp. 1497–1505.10.1016/S1359-6454(01)00069-6 ↗
11. X.Z. Liao, J.Y. Huang, Y.T. Zhu, F. Zhou, and E.J. Lavernia: Phil. Mag. A, 2003, vol. 83, pp. 3065–75.10.1080/1478643031000152799 ↗
12. X.Z. Liao, F. Zhou, E.J. Lavernia, S.G. Srinivasan, M.I. Baskes, D.W. He, and Y.T. Zhu: Appl. Phys. Lett., 2003, vol. 83, pp. 632–34.10.1063/1.1594836 ↗
13. J. Wang, Y. Iwahashi, Z. Horita, M. Furukawa, M. Nemoto, R.Z. Valiev, and T.G. Langdon: Acta Mater., 1996, vol. 44, pp. 2973–82.10.1016/1359-6454(95)00395-9 ↗
14. F. Zhou, X.Z. Liao, Y.T. Zhu, S. Dallek, and E.J. Lavernia: Acta Mater., 2003, vol. 51, pp. 2777–91.10.1016/S1359-6454(03)00083-1 ↗
15. J. Lee, F. Zhou, K.H. Chung, N.J. Kim, and E.J. Lavernia: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 3109–15.10.1007/s11661-001-0185-8 ↗
16. F. Zhou, J. Lee, S. Dallek, and E.J. Lavernia: J. Mater. Res., 2001, vol. 16, pp. 3451–58.10.1557/JMR.2001.0474 ↗
17. S. Lee, A. Utsunomiya, H. Akamatsu, K. Neishi, M. Furukawa, Z. Horita, and T.G. Langdon: Acta Mater., 2002, vol. 50, pp. 553–64.10.1016/S1359-6454(01)00368-8 ↗
18. T.G. Nieh, L.M. Hsiung, J. Wadsworth, and R. Kaibyshev: Acta Mater., 1998, vol. 46, pp. 2789–800.10.1016/S1359-6454(97)00452-7 ↗
19. S. Komura, Z. Horita, M. Furukawa, M. Nemoto, and T.G. Langdon: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 707–16.10.1007/s11661-001-0087-9 ↗
20. E.A. Marquis and D.N. Seidman: Acta Mater., 2001, vol. 49, pp. 1909–19.10.1016/S1359-6454(01)00116-1 ↗
21. G.M. Novotny and A.J. Ardell: Mater. Sci. Eng., 2001, vol. A318, pp. 144–154.10.1016/S0921-5093(01)01326-0 ↗
22. M.J. Jones and F.J. Humphreys: Acta Mater., 2003, vol. 51, pp. 2149–59.10.1016/S1359-6454(03)00002-8 ↗
23. F. Zhou, S.R. Nutt, C.C. Bampton, and E.J. Lavernia: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1985–92.10.1007/s11661-003-0163-4 ↗
24. F. Zhou, R. Rodriguez, and E.J. Lavernia: Mater. Sci. Forum, 2002, vols. 386–388, pp. 409–14.10.4028/www.scientific.net/MSF.386-388.409 ↗
25. H.L. Luo, C.C. Chao, and P. Duwez: Trans. TMS-AIME, 1964, vol. 230, pp. 1488–90.
26. Binary Alloy Phase Diagram, T.B. Massalski, ed., ASM INTERNATIONAL, Metals Park, OH, 1991.
27. F. Zhou, D. Witkin, S.R. Nutt, and E.J. Lavernia: Mater. Sci. Eng. A, 2004, vols. 375–377, pp. 917–21.10.1016/j.msea.2003.10.235 ↗
28. H.J. Fecht, E. Hellstern, Z. Fu, and W.L. Johnson: Metall. Trans. A, 1990, vol. 21A, pp. 2333–37.10.1007/BF02646980 ↗
29. J. Eckert, J.C. Holzer, C.E. Krill III, and W.L. Johnson: J. Mater. Res., 1992, vol. 7, pp. 1751–61.10.1557/JMR.1992.1751 ↗
30. X. Zhang, H. Wang, M. Kassem, J. Narayan, and C.C. Koch: J. Mater. Res., 2001, vol. 16, pp. 3485–95.10.1557/JMR.2001.0479 ↗
31. R.J. Perez, H.G. Jiang, C.P. Dogan, and E.J. Lavernia: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2469–75.10.1007/s11661-998-0218-7 ↗
32. Advanced Aluminum Alloys Containing Scandium, Structure and Properties, L.S. Torpopova, M.L. Kharakterova, T.V. Dobatkina, and D.G. Eskin, eds., Gordon and Breach Science Publishers, Amsterdam, 1998.