journal article·2004-01

Deformation behavior of Zr3Al-Nb alloys II: Indentation creep studies

R. Tewari, G. K. Dey, T. R. G. Kutty, A. K. Sengupta, S. Banerjee, N. Prabhu

Publisher page

Abstract

The high-temperature mechanical properties of Zr3Al, Zr3Al-3Nb, and Zr3Al-10Nb alloys were assessed using the indentation hardness method. All three alloys showed negligible creep up to 500 K. Using Sargent and Ashby’s approach, different creep parameters such as stress exponent, activation energy, and activation area were estimated. Using the data generated in the present study and those available in the literature, a deformation creep curve was developed. The relationship between hardness and temperature in the high-temperature region can be expressed in terms of an Arrhenious equation. The activation energy estimated from this relationship was found to be in good agreement with that obtained from the indentation creep curve. On comparing the creep behavior of Zr3Al-Nb alloys with some other intermetallics, it was observed that Zr3Al-based intermetallics have better creep resistance compared to other intemetallics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Nuclear Materials and Properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. E.R. Petty: in Techniques of Metal Research, R.F. Bunshah, ed., Interscience Publishers, New York, NY, 1971, vol. 5, part 5, p. 158.
2. E.R. Petty: Metallurgica, 1957, vol. 56, p. 231.
3. G.E. Lucas and C. Pendleton: J. Nucl. Mater., 1981, vol. 103, p. 1539.10.1016/0022-3115(82)90819-4 ↗
4. B.W. Mott: Microindentation Hardness Testing, Butterworth and Co., London, 1956, p. 157.
5. D. Tabor: The Hardness of Metals, Clarendon Press, Oxford, United Kingdom, 1951, p. 1.
6. H. O’Neill: Hardness Measurement of Metals and Alloys, Chapman and Hall, London, 1967, p. 153.
7. E.M. Schulson: J. Nucl. Mater., 1977, vol. 66, p. 322.10.1016/0022-3115(77)90120-9 ↗
8. E.M. Schulson, M.L. Swanson, and S.R. MacEwen: Phil. Mag. A. 1978, vol. 37, p. 575.10.1080/01418617808239192 ↗
9. E.M. Schulson: in Intermetallic Compounds, J.H. Westbrook and R.L. Fleischer, eds., John Wiley & Sons Ltd., New York, NY, 1994, vol. 2, p. 133.
10. R. Tewari, G.K. Dey, R.K. Fotedar, T.R.G. Kutty, and N. Prabhu: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 189–203.10.1007/s11661-004-0120-x ↗
11. P.M. Sargent and M.F. Ashby: Mater. Sci. Technol., 1992, vol. 8, p. 594.10.1179/mst.1992.8.7.594 ↗
12. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps, Pregamon Press, Oxford, United Kingdom, 1982, p. 1.
13. W.B. Li, J.L. Henshall, R.M. Hooper, and K.E. Easterling: Acta Metall. Mater., 1991, vol. 39, p. 3099.10.1016/0956-7151(91)90043-Z ↗
14. J. Larson-Badse: Trans. Jpn. Inst. Met., 1986, vol. 9, p. 132.
15. A.R. Causey, V. Fidleris, H.E. Rosinger, E.M. Schulson, and V.F. Urbanic: in Zirconium in Nuclear Industry, ASTM-STP-633, A.L. Lowe, Jr. and G.W. Parry, eds., ASTM, Philadelphia, PA, 1977, p. 137.
16. B. Reppich: in Materials Science and Technology: A Comprehensive Treatment, R.W. Cahn, P. Hassan, and E.J. Kramer, eds., VCH Publishers, Weiheim, 1994, p. 311.
17. E.M. Schulson and D.B. Graham: Acta Metall., 1976, vol. 24, p. 615.10.1016/0001-6160(76)90081-X ↗
18. T.R.G. Kutty: Ph.D. Thesis, Indian Institute of Science, Bangalore, 1996.
19. Y.A. Chang, L.M. Pike, C.T. Liu, A.R. Bilbey, and D.D. Stone: Intermetallics, 1993, vol. 1, p. 107.10.1016/0966-9795(93)90028-T ↗
20. R. Lagenborg: Int. Metall. Rev., 1972, vol. 11, p. 120.
21. T.O. Mulhearn and D. Tabor: J. Inst. Met., 1960–61, vol. 89, p. 7.
22. J. Pomey, A. Royez, and J.P. Georges: Rev. Metall., 1956, vol. 56, p. 215.10.1051/metal/195956030215 ↗
23. T.R.G. Kutty, C. Ganguly, and D.H. Sastry: Scripta Mater., 1996, vol. 34, p. 1833.10.1016/1359-6462(95)00686-9 ↗
24. A.G. Atkin: in Science of Hardness Testing and Its Research Applications, J.H. Westbrook and H. Conard, eds., ASM, Metals Park, OH, 1971, p. 233.
25. J. Weertman: J. Appl. Phys., 1957, vol. 28, p. 362.10.1063/1.1722747 ↗
26. C.R. Barrett and W.D. Nix: Acta Metall., 1965, vol. 13, p. 1247.10.1016/0001-6160(65)90034-9 ↗
27. R. Tewari, G.K. Dey, S. Banerjee, R.K. Fotedar, and N. Prabhu: Int. Conf. on Advances in Materials & Materials Processing (ICAMMP-2002), Indian Institute of Technology, Kharagpur, 2002, p. 417.
28. M.A. Morris: Phil. Mag. A, 1992, vol. 65, p. 943.10.1080/01418619208205599 ↗
29. E. Arzt and D.S. Wilkinson: Acta Metall. Mater., 1986, vol. 34, p. 1893.10.1016/0001-6160(86)90247-6 ↗
30. E. Arzt and D.S. Wilkinson: Acta Metall. Mater., 1981, vol. 29, p. 519.
31. E. Arzt: Res. Mechanica, 1991, vol. 31, p. 399.
32. G. Golzalez-Doncel and O.D. Sherby: Acta Metall. Mater., 1993, vol. 41, p. 2797.10.1016/0956-7151(93)90094-9 ↗
33. P. Holdway and A.E. Staton-Bevan: J. Mater. Sci., 1986, vol. 21, p. 2843.10.1007/BF00551500 ↗
34. D.L. Douglas: The Metallurgy of Zirconium, International Atomic Energy Agency, Vienna, 1971.
35. Y.V. Milmana, D.B. Miracleb, S.I. Chugunovaa, I.V. Voskoboinika, N.P. Korzhovaa, T.N. Legkayaa, and Y.N. Podrezova: Intermetallics, 2001, vol. 9, p. 839.10.1016/S0966-9795(01)00073-5 ↗
36. R.S. Sundar, T.R.G. Kutty, and D.H. Sastry: Intermetallics, 2000, vol. 8, p. 427.10.1016/S0966-9795(99)00118-1 ↗
37. T.E. Mitchell and A. Misra: Mater. Sci. Eng., 1999, vol. A261, p. 106.10.1016/S0921-5093(98)01055-7 ↗
38. J. Duszczyk, L.Z. Zhuang, and L. Buekenhout: J. Mater. Sci., 1999, vol. 34, p. 1557.10.1023/A:1004520431164 ↗
39. T. Takahashi and D.C. Dunand: Mater. Sci. Eng., 1995, vols. A192–A93, p. 195.10.1016/0921-5093(94)03235-1 ↗
40. C.H. Henager, Jr., R.E. Jacobson, and S.M. Bruemmer: Mater. Sci. Eng., 1992, vol. A153, p. 416.10.1016/0921-5093(92)90230-X ↗
41. T.G. Nieh and J. Wadsworth: Scripta Metall., 1990, vol. 24, p. 1489.10.1016/0956-716X(90)90419-H ↗
42. G. Sharma, R.V. Ramanujan, T.R.G. Kutty, and G.P. Tewari: Mater. Sci. Eng., 2000, vol. A278, p. 106.10.1016/S0921-5093(99)00590-0 ↗
43. R.S. Sundar, T.R.G. Kutty, and D.H. Sastry: Intermetallics, 2000, vol. 8, p. 427.10.1016/S0966-9795(99)00118-1 ↗
44. J.A. Jimenez and G. Frommeyer: Mater. Sci. Eng., 1996, vol. A220, p. 93.10.1016/S0921-5093(96)10480-9 ↗
45. Y.L. Jeng, E.J. Lavernia, R.M. Hayes, and J. Wolfenstine: Mater. Sci. Eng., 1995, vols. A192–A93, p. 240.10.1016/0921-5093(94)03255-6 ↗
46. C.P. Reip and G. Sauthoff: Intermetallics, 1996, vol. 4, p. 377.10.1016/0966-9795(95)00058-5 ↗
47. J. Lapin: Intermetallics, 1999, vol. 7, p. 599.10.1016/S0966-9795(98)00065-X ↗
48. T.H. Yu, W.J. Yue, and C.H. Koo: Mater. Chem. Phys., 1997, vol. 50, p. 238.10.1016/S0254-0584(97)01942-1 ↗
49. T.K. Nandy and D. Banerjee: Intermetallics, 2000, vol. 8, p. 1269.10.1016/S0966-9795(00)00083-2 ↗