Creep-Induced Microstructural Evolution and Acoustic Characterization in Tempered Martensitic Stainless Steel
Source abstract
Abstract
The microstructural evolution of a tempered martensitic stainless steel (a 12 pct chromium steel, type-403), during creep test, subjected to a tensile creep test at 873 K, was studied by monitoring the shear-wave attenuation and velocity using electromagnetic acoustic resonance (EMAR). The study disclosed an attenuation peak at around 20 to 30 pct of the creep life, and a minimum value at 50 pct of the creep life, and a local minimum velocity at the attenuation peak, independent of the applied stress. These novel phenomena are interpreted as a result of microstructural changes, especially dislocation recovery. This interpretation is supported by transmission electron microscopy observations of the dislocation structure. The relationship between the changes in attenuation, velocity, and microstructure evolution can be explained with the string model. The study results have suggested that EMAR possesses the potential to assess the progress of creep damage and to predict the remaining creep life of metals.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Microstructure and Mechanical Properties of Steels · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. R. Viswanathan: Damage Mechanism and Life Assessment of High Temperature Components, ASM INTERNATIONAL, Materials Park, OH, 1989, pp. 1–11010.31399/asm.tb.dmlahtc.9781627083409 ↗
2. R.B. Dooley, R. Viswanathan: Life Extension and Assessment of Fossil Power Plants, Proc. Conf. in Washington, June 1986, EPRICS5208, Electric Power Research Institute, Palo Alto, CA, 1987
3. B. Raj, V. Moorthy, T. Jayakumar, R.K. Bhanu Sankara: Int. Mater. Rev., 2003, vol. 48, pp. 273–3210.1179/095066003225010254 ↗
4. G. Dobmann, N. Meyendorf, E.E. Schneider: Nucl. Eng. Des., 1997, vol. 171, pp. 95–11210.1016/S0029-5493(96)01319-2 ↗
5. D.S. Drion, P.K. Liaw, and R.D. Rishel: ASME PVP-Vol.239/MPC-Vol.33, Serviceability of Petroleum Process and Power Equipment, ASME, OH, 1992, pp. 5–14
6. P. Auerkari, J. Salonen: Int. J. Pressure Vessel Piping, 1989, vol. 39, pp. 135–4410.1016/0308-0161(89)90043-4 ↗
7. R. Becker, G. Dobmann, M. Kronig, H. Reiter, E. Schneider: Int. J. Pressure Vessel Piping, 1997, vol. 73, pp. 11–1710.1016/S0308-0161(97)00028-8 ↗
8. B. Neubauer, U. Wedel: in Advances in Life Prediction Methods, D.A. Woodford, J.R. Whitehead, eds., ASME, New York, NY, 1983, pp. 307–14
9. R.T. Delong: ASTM standard E12-87, ASTM, Philadelphia, PA, 1987
10. P.L. Jones, A.S. Tetelman: Eng. Fract. Mech., 1979, vol. 12, pp. 79–9710.1016/0013-7944(79)90065-1 ↗
11. A. Garzillo, C. Guardmagna, L. Moscotti, L. Ranzani: Int. J. Pressure Vessel Piping, 1996, vol. 663, pp. 223–3210.1016/0308-0161(95)00097-6 ↗
12. H. Willems, W. Bendick, H. Weber: in Nondestructive Characterization of Materials II, J.F. Brussiere, J. Ruud Monchalin, R.E. Green Jr., eds., Plenum Press, New York, NY, 1987, pp. 451–4510.1007/978-1-4684-5338-6_46 ↗
13. H.M. Ledbetter, R.J. Fields, S.K. Datta: Acta Metall., 1987, vol. 35, pp. 2393–9810.1016/0001-6160(87)90086-1 ↗
14. M. Nakashiro, H. Yoneyama, A. Ohtomo: Int. Conf. on Advances in Material Technology for Fossil Power Plants, ASME International, Metals Park, OH, 1987, pp. 351–35
15. S. Kishimoto, N. Shinya, S. Matsumoto, H. Fukuhara: Proc. 26th Symp. on Strength of Materials at High Temperatures, The Society of Materials Science, Tokyo, 1988, pp. 11–15 (in Japanese)
16. A.S. Birring, D.G. Alcazer, J.J. Hanley, S. Gehl: in Review of Progress in Quantitative Non-Destructive Evaluation, vol. 8B, D.O. Thompson, D.E. Chimenti, eds., Plenum Press, New York, NY, 1989, pp. 1833–4010.1007/978-1-4613-0817-1_232 ↗
17. M. Hirao, T. Morishita, H. Fukuoka: Metall. Trans. A, 1990, vol. 21A, pp. 1725–3210.1007/BF02672589 ↗
18. T. Morishita, M. Hirao: Int. J. Solids Struct., 1997, vol. 34, pp. 1169–7510.1016/S0020-7683(96)00110-2 ↗
19. K. Goebbels: Research Technology in NDT, vol. 4, Academic Press, London, 1980, pp. 87–157
20. M. Hirao, H. Ogi, H. Fukuoka: Rev. Scientific Instrum., 1993, vol. 64, pp. 3198–320510.1063/1.1144328 ↗
21. M. Hirao, H. Ogi: Ultrasonics, 1997, vol. 35, pp. 413–2110.1016/S0041-624X(97)00030-9 ↗
22. M. Hirao, H. Ogi: EMATs for Science and Industry, Kluwer Academic Publisher, Boston, MA, 2003, pp. 1–19310.1007/978-1-4757-3743-1 ↗
23. T. Ohtani, H. Ogi, M. Hirao: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 411–2010.1007/s11661-005-0312-z ↗
24. T. Ohtani, H. Ogi, M. Hirao: Int. J. Solids Struct., 2005, vol. 42, pp. 2911–2810.1016/j.ijsolstr.2004.09.037 ↗
25. T. Ohtani: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2967–7710.1007/s11661-005-0070-y ↗
26. T. Ohtani, H. Ogi, M. Hirao: Trans. ASME, J. Eng. Mater. Technol., 2006, vol. 128, pp. 234–4210.1115/1.2172629 ↗
27. T. Ohtani, H. Ogi, M. Hirao: Jpn. J. Appl. Phys., 2006, vol. 45 (5B), pp. 4526–3310.1143/JJAP.45.4526 ↗
28. T. Ohtani, H. Ogi, M. Hirao: Acta Mater., 2006, vol. 54, pp. 2705–1310.1016/j.actamat.2006.02.010 ↗
29. ASM Specialty Handbook, Stainless Steel, J.D. Davis, ed., ASM INTERNATIONAL, Metals Park, OH, 1994, pp. 14–18
30. B.W. Maxfield, C.M. Fortuko: Mater. Eval., 1983, vol. 11, pp. 1399–1408
31. A. Wilbrand: in Review of Progress in QNDE, Plenum Press, New York, NY, 1987, vol. 7A, pp. 671–80
32. R.B. Thompson: in Physical Acoustics, vol. XIX, R.N. Thurston, A.D. Pierce, eds., Academic Press, Inc., New York, NY, 1990, pp. 157–200
33. C.M. Furtunko, G.L. Petersen, B.B. Chick, M.C. Renken, A.L. Peris: Rev. Scientific Instrum., 1992, vol. 63, pp. 3477–8610.1063/1.1143752 ↗
34. H. Ogi, M. Hirao, T. Honda: J. Acoust. Soc. Am., 1995, vol. 98, pp. 458–6410.1121/1.413703 ↗
35. K. Maruyama, C. Harada, H. Oikawa: J. Soc. Mater. Sci. Jpn., 1985, vol. 34, pp. 1289–9510.2472/jsms.34.1289 ↗
36. K. Maruyama, H. Oikawa: Trans. ASME, J. Pressure Vessel Technol., 1987, vol. 109, pp. 142–4810.1115/1.3264846 ↗
37. T. Matsuo, T. Kisanumki, R. Tanaka, S. Komatsu: Tetsu-to-Hagané, 1984, vol. 70, pp. 565–72 (in Japanese)10.2355/tetsutohagane1955.70.6_565 ↗
38. G. Eggeler, N. Nilsvang, B. Ilschner: Steel Res., 1987, vol. 47, pp. 97–10310.1002/srin.198701594 ↗
39. H.R. Tipler, B.E. Hopkins: Met. Sci., 1976, vol. 10, pp. 47–5310.1179/030634576790432056 ↗
40. F. Abe: Mater. Sci. Eng A., 2004, vols. 387–389, pp. 565–6910.1016/j.msea.2004.01.057 ↗
41. J. Cadek: Metallic Materials, Elsevier, Amsterdam, 1988, pp. 95–114
42. G. Eggeler: Acta Metall, 1989, vol. 37, pp. 3225–3410.1016/0001-6160(89)90194-6 ↗
43. O.D. Sherby, R.D. Klundt, A.K. Miller: Metall. Trans. A, 1977, vol. 8A, pp. 843–5010.1007/BF02661565 ↗
44. S.V. Raj, G.M. Pharr: Mater. Sci. Eng., 1986, vol. 81, pp. 217–3710.1016/0025-5416(86)90265-X ↗
45. A. Orlova, J. Bursik, K. Kucharova, V. Sklenicka: Mater. Sci. Eng., 1998, vol. A245, pp. 39–4810.1016/S0921-5093(97)00708-9 ↗
46. R.C. Truell, C. Elbaum, B.B. Chick: Ultrasonic Methods in Solid State Physics, Academic Press, New York, NY, 1969, pp. 159–24910.1016/B978-1-4832-3318-5.50008-0 ↗
47. A. Granato, K. Lücke: J. Appl. Phys., 1956, vol. 27, pp. 583–9310.1063/1.1722436 ↗
48. M. Pahutova, J. Cadek: Mater. Sci. Eng., 1984, vol. 62, pp. 33–4010.1016/0025-5416(84)90264-7 ↗
49. M. Hirao, H. Ogi, N. Suzuki, T. Ohtani: Acta Mater., 2000, vol. 48, pp. 517–2410.1016/S1359-6454(99)00346-8 ↗
50. T. Ohtani, H. Ogi, M. Hirao: J. Alloy Compounds, 2000, vol. 310, pp. 440–4410.1016/S0925-8388(00)00956-7 ↗
51. H. Ogi, Y. Minami, M. Hirao: J. Appl. Phys., 2002, vol. 91, pp. 1849–5410.1063/1.1433178 ↗
52. T. Ohtani, K. Nishiyama, S. Yoshikawa, H. Ogi, M. Hirao: Mater. Sci. Eng. A, 2006, vol. 442, pp. 466–7010.1016/j.msea.2006.02.226 ↗
53. A.S. Keh, S. Weissmann: in Electron Microscopy and Strength of Crystals, G. Thomas, J. Washburn, eds., Interscience, New York, NY, 1963, pp. 231–99
54. C.R. Barrett, W.D. Nix, O.D. Sherby: Trans. ASM, 1966, vol. 59, pp. 3–15
55. T. Hasegawa, Y. Ikeuch, S. Karashima: Met. Sci. J., 1972, vol. 6, pp. 78–8210.1179/030634572790445858 ↗