journal article·2015-12

Size Effects on Strength in the Transition from Single-to-Polycrystalline Behavior

Pradipta Ghosh, Atul H. Chokshi

Publisher page

Abstract

During the transition from single crystalline to polycrystalline behavior, the available data show the strength increasing or decreasing as the number of grains in a cross section is reduced. Tensile experiments were conducted on polycrystalline Ni with grain sizes (d) between 16 and 140 mu m and varying specimen thickness (t), covering a range of lambda (-t/d) between similar to 0.5 and 20. With a decrease in lambda, the data revealed a consistent trend of strength being independent of lambda at large lambda, an increase in strength, and then a decrease in strength. Microstructural studies revealed that lower constraints enabled easier rotation of the surface grains and texture evolution, independent of the specimen thickness. In specimen interiors, there was a greater ease of rotation in thinner samples. Measurements of misorientation deviations within grains revealed important differences in the specimen interiors. A simple model is developed taking into account the additional geometrically necessary dislocations due to variations in the behavior of surface and interior grains, leading to additional strengthening. A suitable combination of this strengthening and surface weakening can give rise to wide range of possibilities with a decrease in lambda, including weakening, strengthening, and strengthening and weakening.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. O. E. Hall, Proc. Phys. Soc. London, B64 (1951) 747-75310.1088/0370-1301/64/9/303 ↗
2. N. J. Petch, J. Iron Steel Inst., 174 (1953) 25-28
3. H. Conrad, Mater. Sci. Eng., A 341 (2003) 216-22810.1016/S0921-5093(02)00238-1 ↗
4. A. H. Chokshi, A. Rosen A, J. Karch, H. Gleiter, Scr. Metall., 23 (1989) 1679-168310.1016/0036-9748(89)90342-6 ↗
5. J. Schiotz, F. D. Di Tolla, K. W. Jacobsen, Nature 391 (1998) 561-56310.1038/35328 ↗
6. S. S. Brenner, J. Appl. Phys., 27 (1956) 1484-149110.1063/1.1722294 ↗
7. S.S. Brenner, J. Appl. Phys., 28 (1957) 1023-102610.1063/1.1722900 ↗
8. M. Uchic, D. Dimiduk, J. Florando, W. Nix, Science 305 (2004) 986-98910.1126/science.1098993 ↗
9. J. R. Greer, W. C. Oliver, W. D. Nix, Acta Mater., 53 (2005) 1821-183010.1016/j.actamat.2004.12.031 ↗
10. S. I. Rao, D. M. Dimiduk, T. A. Parthasarathy, M. D. Uchic, M. Tang, C. Woodward, Acta Mater., 56 (2008) 3245-325910.1016/j.actamat.2008.03.011 ↗
11. E. Orowan, Symposium on Internal Stresses, Institute of Metals, London, 1947, 45
12. J. Yu, J. Liu, J. Zhang, J. Wu, Mater. Lett. 60 (2006) 206-20910.1016/j.matlet.2005.08.018 ↗
13. D. Kiener, C. Motz, M. Rester, M. Jenko, G. Dehm, Mater. Sci. Eng. A, 459 (2007) 262-27210.1016/j.msea.2007.01.046 ↗
14. S. Shim, H. Bei, M. K. Miller, G. M. Pharr, E. P. George, Acta Mater., 57 (2009) 503-51010.1016/j.actamat.2008.09.033 ↗
15. Z. Shan, R. Mishra, S. Asif, O. Warren, and A. Minor, Nature Mater. 7, (2008) 115-11910.1038/nmat2085 ↗
16. A.T. Jennings, M. J. Burek, J. R. Greer, Phys. Rev. Lett. 104 (2010) 13550310.1103/PhysRevLett.104.135503 ↗
17. H. Bei, S. Shim, G.M. Pharr, E.P. George. Acta Mater. 56 (2008) 4762-477010.1016/j.actamat.2008.05.030 ↗
18. J. A. El-Awady, C. Woodward, D. M. Dimiduk, N. M. Ghoniem, Phys Rev B 80 (2009)10410410.1103/PhysRevB.80.104104 ↗
19. A.S. Schneider, D.Kiener, C.M.Yakacki, H.J.Maier, P.A.Gruber, N.Tamura, M.Kunz, A.M. Minor, C.P.Frick, Mater. Sci. Eng. A 559 (2013) 147–15810.1016/j.msea.2012.08.055 ↗
20. J. A. El-Awady, Nature Communications 6 (2015) 592610.1038/ncomms6926 ↗
21. N. A. Fleck, G. M. Muller, M. F. Ashby, J. W. Hucthinson, Acta Metall. Mater., 42 (1994) 475-48710.1016/0956-7151(94)90502-9 ↗
22. D. Liu, Y. He, D. J. Dunstan, B. Zhang, Z. Gan, P. Hu, H. Ding, Int J Plasticity, 41 (2013) 30-5210.1016/j.ijplas.2012.08.007 ↗
23. W. D. Nix, H. Gao, J. Mech. Phys. Solids., 46 (1998) 411-42510.1016/S0022-5096(97)00086-0 ↗
24. A. G. Evans, J. W. Hutchinson, Acta Mater., 57 (2009) 1675-168810.1016/j.actamat.2008.12.012 ↗
25. M. Rester, C. Motz, R. Pippan, Acta Mater. 55 (2007) 6427-643510.1016/j.actamat.2007.08.001 ↗
26. E. Demir, D. Raabe, N. Zaafarani, S. Zaefferer, Acta Mater. 57 (2009) 559-56910.1016/j.actamat.2008.09.039 ↗
27. M. F. Ashby, Phil Mag 21 (1970) 39910.1080/14786437008238426 ↗
28. R. W. Armstrong, J. Mech. Phys. Solids., 9 (1961) 196-19910.1016/0022-5096(61)90018-7 ↗
29. A. W. Thompson, Scr. Metall., 8 (1974) 145-14810.1016/0036-9748(74)90461-X ↗
30. S. Miyazaki, K. Shibata, H. Fujita, Acta Metall., 27(1979) 855-86210.1016/0001-6160(79)90120-2 ↗
31. X. X. Chen, A. H. W. Ngan, Scr. Mater., 64 (2011) 717-72010.1016/j.scriptamat.2010.12.031 ↗
32. S. Chauhan, A. F. Bastawros, Appl. Phys. Lett., 93 (2008) 4190110.1063/1.2961006 ↗
33. A. Molotnikov, R. Lapovok, C. H. J. Davies, W. Cao, Y. Estrin, Scr. Mater., 59 (2008) 1182-118510.1016/j.scriptamat.2008.08.004 ↗
34. C. Y. Dai, G. P. Zhang, C. Yan, Phil. Mag., 91 (2011) 932-94510.1080/14786435.2010.538017 ↗
35. B. Yang, C. Motz, M. Rester, G. Dehm, Phil. Mag. 92 (2012) 3243-325610.1080/14786435.2012.693215 ↗
36. L. Yang, L. Lu, Scr. Mater. 69 (2013) 242-24510.1016/j.scriptamat.2013.04.009 ↗
37. N. L. Okamoto, D. Kashioka, T. Hirato, H. Inui, Int. J. Plast.,56 (2014)173-18310.1016/j.ijplas.2013.12.003 ↗
38. D. Jang, J. R. Greer, Scr. Mater., 64 (2011) 77-8010.1016/j.scriptamat.2010.09.010 ↗
39. C. Wang, C. Wang, B. Guo, D. Shan, G. Huang, Mater. Lett., 106 (2013) 294-29610.1016/j.matlet.2013.05.037 ↗
40. W. Gu, C. N. Loynachan, Z. Wu, Y. W. Zhang, D. J. Srolovitz, J. R. Greer, Nano Lett., 12 (2012) 6385-639210.1021/nl3036993 ↗
41. J.T. Fourie, Phil. Mag. 15 (1967) 18710.1080/14786436708230357 ↗
42. J.T. Fourie, Phil. Mag 17 (1968) 73510.1080/14786436808223026 ↗
43. H. Mughrabi, Phys. Stat. Sol., 39 (1970) 317-32710.1002/pssb.19700390133 ↗
44. H. Mughrabi, Phys. Stat. Sol., 44 (1971) 391-40210.1002/pssb.2220440140 ↗
45. J.Y. Zhang, X. Liang, P. Zhang, K. Wu, G. Liu, J. Sun, Acta Mater. 66 (2014) 302-31610.1016/j.actamat.2013.11.018 ↗
46. S. Nemat-Nasser, A. Maximenko, E. Olevsky, J. Mech. Phys. Solids, 54 (2006) 2474-249410.1016/j.jmps.2006.04.010 ↗
47. H. D. Espinosa, B. C. Prorok, B. Peng, J. Mech. Phys. Solids, 52 (2004) 667- 68910.1016/j.jmps.2003.07.001 ↗
48. M. Lederer, V. Gröger, G. Khatibi, B. Weiss, Mat. Sci. Eng. A, 527 (2010) 590-59910.1016/j.msea.2009.08.016 ↗
49. J. A. Grogan, S. B. Leen, P.E. McHugh, J. Mech. Behav. Biomed. Mater., 20 (2013) 61-7610.1016/j.jmbbm.2012.12.008 ↗
50. G. Ribárik: Ph.D. Thesis, Eötvös University, Budapest, 2008. http://csendes.elte.hu/cmwp/
51. G. I. Taylor, J. Inst. Met., 62 (1938) 307-324
52. A. W. Thompson, Acta Metall., 23 (1975) 1337-134210.1016/0001-6160(75)90142-X ↗
53. T. Narutani, J. Takamura, Acta Metall. Mater., 39 (1991) 2037-204910.1016/0956-7151(91)90173-X ↗
54. I. Matsui, T. Uesugi, Y. Takigawa, K. Higashi, Acta Mater., 61 (2013) 3360-336910.1016/j.actamat.2013.02.025 ↗
55. A.W. Thompson, A.I. Baskes, W.F. Flanagan, Acta Metall., 1973, vol. 21, pp. 1017–2810.1016/0001-6160(73)90158-2 ↗
56. U.F. Kocks, H. Mecking, Prog. Mater. Sci., 48 (2003) 171-27310.1016/S0079-6425(02)00003-8 ↗
57. R.I. Barabash, E. Huang, J.J. Wall, J.H. Wilkerson, Y. Ren, W. Liu, S.C. Vogel, G.E. Ice, L.M. Pike, P.K. Liaw, Mater. Sci. Eng., 528 (2010) 3-1010.1016/j.msea.2010.07.035 ↗
58. J. Mayer, L.A. Giannuzzi, T. Kamino, J. Michael. MRS Bull., 32 (2007) 40010.1557/mrs2007.63 ↗
59. E.S. Lambers, C.N. Dykstal, J.M. Seo, J.E. Rowe, P.H. Holloway, Oxid. Met., 45 (1996) 301-32110.1007/BF01046987 ↗
60. N. Warthi, P. Ghosh, A.H. Chokshi, Scripta Mater., 68 (2013) 225-22810.1016/j.scriptamat.2012.09.029 ↗
61. M.R. Notis, R.M. Spriggs and W.C. Hahn, J. Geophy. Res 76 (1971) 7052-706110.1029/JB076i029p07052 ↗
62. Rinaldi, P. Peralta, K. Sieradzki, E. Traversa, S. Licoccia, J. Nanomech. Micromech. 2 (2012) 42-4810.1061/(ASCE)NM.2153-5477.0000047 ↗
63. D.J. Dunstan, A.J. Bushby, Int J Plasticity 40 (2013) 142-16210.1016/j.ijplas.2012.08.002 ↗
64. D.J. Dunstan, A.J. Bushby, Int J Plasticity 53 (2014) 56-6510.1016/j.ijplas.2013.07.004 ↗
65. L. Johnson, M. Ashby, Acta Metall. 16 (1968) 219–22510.1016/0001-6160(68)90117-X ↗
66. P.J. Imrich, C. Kirchlechner, C. Motz, G. Dehm, Acta Mater. 73 (2014) 240-25010.1016/j.actamat.2014.04.022 ↗
67. M. Henning, H. Vehoff, Mater. Sci. Eng., A, 452-453 (2007) 602-61310.1016/j.msea.2006.11.113 ↗
68. Y. Chen, O. Kraft and M. Walter, Acta Mater. 87 (2015) 78-8510.1016/j.actamat.2014.12.034 ↗
69. C. Keller, E. Hug, Mater, Lett., 62 (2008) 1718-172010.1016/j.matlet.2007.09.069 ↗
70. C. Keller, E. Hug, D. Chateigner, Mater. Sci. Eng., A 500 (2009) 207-21510.1016/j.msea.2008.09.054 ↗
71. H. Mughrabi, Acta Metall., 31 (1983) 1367-137910.1016/0001-6160(83)90007-X ↗
72. Q. Yu, R.K. Mishra, J.W. Morris Jr, A. M. Minor, Phil Mag. 94 (2014) 2062-207110.1080/14786435.2014.906755 ↗
73. A. M. Hussein, S.I. Rao, M.D. Uchic, D.M. Dimiduk, J.A. El-Awady, Acta Mater. 85 (2015) 180-19010.1016/j.actamat.2014.10.067 ↗
74. C.A. Bronkhorst, S.R. Kalidindi, L. Anand, Phil. Trans. R. Soc. Lond. A,341 (1992) 443-47710.1098/rsta.1992.0111 ↗
75. A. Rinaldi, P. Peralta, C. Friesen, K. Sieradzki, Acta Mater., 56 (2008) 511-51710.1016/j.actamat.2007.09.044 ↗
76. Z. Zhao, M. Ramesh, D. Raabe, A.M. Cuitino, R. Radovitzky, Int. J. Plast., 24 (2008) 2278-229710.1016/j.ijplas.2008.01.002 ↗
77. B.C. Larson, J.Z. Tischler, A. El-Azab, W. Liu, J. Eng. Mater. Tech., 130 (2008) 02102410.1115/1.2884336 ↗
78. P.A. Shade, M.A. Groeber, J.C. Schuren, M.D. Uchic, Integrating Mater. Manufacturing Innovations, 2 (2013) 510.1186/2193-9772-2-5 ↗