journal article·2005-07

Long-term oxidation of an as-cast Ni3Al alloy at 900 °C and 1100 °C

Dongyun Lee, M. L. Santella, I. M. Anderson, G. M. Pharr

Publisher page

Abstract

The oxidation behavior of a cast nickel aluminide alloy, IC221M, was examined after long-term aging in air for up to 16,600 hours at 900 °C and 5000 hours at 1100 °C. The oxidation products were identified using X-ray diffraction and energy-dispersive X-ray (EDX) spectroscopy with multivariate statistical analysis. At 900 °C, NiO dominates the oxidation products initially, but at longer times, NiAl2O4 spinel and Al2O3 predominate and remain stable for times up to 16,600 hours. Cross-sectional observation confirmed that a continuous surface oxide that is mostly a mixture of Al2O3 and NiAl2O4 protects the base metal. In its initial stages, the oxidation process at 1100 °C is qualitatively similar to that at 900 °C but with faster kinetics. However, as aging proceeds, NiO spalls freely from the surface, and a protective continuous oxide scale does not form. The oxidation mechanism can be qualitatively understood by the selective oxidation mechanism maps developed by Giggins and Pettit.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. C.T. Liu, V.K. Sikka, J.A. Horton, and E.H. Lee: Report No. ORNL-6483, Oak Ridge National Laboratory, Oak Ridge, TN, Aug. 1988.
2. V.K. Sikka, J.T. Mavity, and K. Anderson: Mater. Sci. Eng. A, 1992, vol. A153, pp. 712–21.10.1016/0921-5093(92)90276-7 ↗
3. M.L. Santella: Scripta Metall. Mater., 1993, vol. 28, pp. 1305–10.10.1016/0956-716X(93)90473-6 ↗
4. M.L. Santella and Z. Feng: Trends in Welding Research, Proc. 4th Int. Conf., Gatlinburg, TN, 1995, pp. 609–14.
5. Dongyun Lee, M.L. Santella, I.M. Anderson, and G.M. Pharr: Intermetallics, 2005, vol. 13, pp. 187–96.10.1016/j.intermet.2004.07.046 ↗
6. S.C. Deevi and V.K. Sikka: Intermetallics, 1996, vol. 4, pp. 357–75.10.1016/0966-9795(95)00056-9 ↗
7. V.K. Sikka, M.L. Santella, and J.E. Orth: Mater. Sci. Eng. A, 1997, vols. A239–A240, pp. 564–69.10.1016/S0921-5093(97)00631-X ↗
8. V.K. Sikka, S.C. Deevi, S. Viswanathan, R.W. Swindeman, and M.L. Santella: Intermetallics, 2000, vol. 8, pp. 1329–37.10.1016/S0966-9795(00)00078-9 ↗
9. V.K. Sikka: Int. Symp. Nickel and Iron Aluminides, S.C. Deevi, ed., ASM INTERNATIONAL, Materials Park, OH, 1997, pp. 361–75.
10. D.B. Lee and M.L. Santella: Mater. Sci. Eng. A, 2004, vol. A374, pp. 217–33.10.1016/j.msea.2004.02.012 ↗
11. P. Trebbia and N. Bonnet: Ultramicroscopy, 1990, vol. 34, pp. 165–78.10.1016/0304-3991(90)90070-3 ↗
12. N. Bonnet, E. Simova, S. Lebonvallet, and H. Kaplan: Ultramicroscopy, 1992, vol. 40, pp. 1–11.10.1016/0304-3991(92)90231-8 ↗
13. I.M. Anderson: Microsc. Microanal., 1999, vol. 5 (2), pp. 318–19.10.1017/S1431927600014914 ↗
14. P.G. Kotula, M.R. Keenan, and J.R. Michael: Microsc. Microanal, 2003, vol. 9, pp. 1–2.10.1017/S1431927603030058 ↗
15. Dongyun Lee: Ph.D. Dissertation, The University of Tennessee, Knoxville, TN, 2004, pp. 163–70.
16. B.D. Cullity: Elements of X-ray Diffraction, 2nd ed., Addison-Wesley Publishing Company Inc., 1978, pp. 411–15.
17. F.S. Pettit: Trans. TMS-AIME, 1967, vol. 239, pp. 1296–305.
18. P. Kofstad: High Temperature Corrosion, Elsevier Applied Science, New York, NY, 1988, pp. 133 and 251.
19. G.C. Wood and F.H. Stott: Mater. Sci. Technol., 1987, vol. 3, pp. 519–30.10.1080/02670836.1987.11782263 ↗
20. W.D. Kingery, H.K. Bowen, and D.R. Uhlmann: Introduction to Ceramics, 2nd ed., John Wiley & Sons, New York, NY, 1976, p. 595.
21. A.S. Khanna: Introduction to High Temperature Oxidation and Corrosion, ASM INTERNATIONAL, Materials Park, OH, 2002, p. 211.
22. N. Birks and G.H. Meier: Introduction to High Temperature Oxidation of Metals, Edward Arnold, London, 1983, p. 122.
23. T.T. Chang, Y.C. Pan, and T.H. Chuang: J. Alloys Compounds, 1996, vol. 243, pp. 126–32.10.1016/S0925-8388(96)02370-5 ↗
24. S. Taniguch, T. Shibata, and H. Tsuruoka: Oxid. Met., 1986, vol. 26 (1–2), pp. 1–17.10.1007/BF00664270 ↗
25. Y.C. Pan, T.H. Chuang, and Y.D. Yao: J. Mater. Sci., 1991, vol. 26, pp. 6097–103.10.1007/BF01113890 ↗
26. C.S. Giggins and F.S. Pettit: J. Electrochem Soc., 1971, vol. 118 (11), pp. 1782–90.10.1149/1.2407837 ↗