journal article·2016-11

Effect of Strain-Induced Age Hardening on Yield Strength Improvement in Ferrite-Austenite Duplex Lightweight Steels

Hyejin Song, Seok Gyu Lee, Seok Su Sohn, Jai-Hyun Kwak, Sunghak Lee

Publisher page

Abstract

Ferrite-austenite lightweight steels showing TRansformation-induced plasticity were developed by varying the aging temperature with or without prestraining, and their effects on tensile properties were investigated in relation with microstructural evolution of carbide formation. The aged steels contained austenite, pearlite, and martensite in the ferrite matrix, and the austenite volume fraction decreased with the increasing aging temperature because some austenite grains decomposed to pearlites. This austenite decomposition to pearlite was favorable for the improvement of yield strength, but negatively influenced overall tensile properties. The prestraining promoted the austenite decomposition by a diffusion-controlled phase transformation, and changed the morphology of the cementite from a long lamellar shape to a densely agglomerated particle shape. In order to obtain the large increase in yield strength as well as excellent combination of strength and ductility, the strain-induced aging treatment, i.e., prestraining followed by aging, is important like in the prestrained and 673 K (400 °C)-aged steel. This large increase in yield strength, in spite of a reduction of elongation (65 to 43 pct), was basically attributed to an appropriate amount of decomposition of austenite to pearlite (e.g., 4 vol pct), while having sufficient austenite to martensite transformation (e.g., 14.5 vol pct martensite).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. S.W. Hwang, J.H. Ji, E.G. Lee, K.-T. Park: Mater. Sci. Eng., 2011, vol. A528, pp. 5196-203.10.1016/j.msea.2011.03.045 ↗
2. C.-H. Seo, K.H. Kwon, K. Choi, K.-H. Kim, J.H. Kwak, S. Lee, N.J. Kim: Scr. Mater., 2012, vol. 66, pp. 519-22.10.1016/j.scriptamat.2011.12.026 ↗
3. S.-J. Park, B. Hwang, K.H. Lee, T.-H. Lee, D.-W. Suh, H.N. Han: Scr. Mater., 2013, vol. 68, pp. 365-9.10.1016/j.scriptamat.2012.09.030 ↗
4. D.-W. Suh, S.-J. Park, T.-H. Lee, C.-S. Oh, S.-J. Kim: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 397-408.10.1007/s11661-009-0124-7 ↗
5. L. Remy, A. Pineau: Scr. Mater., 1977, vol. 28, pp. 99-107.
6. H.W. Zhang, Z.K. Hei, G. Liu, J. Lu, K. Lu: Acta Mater., 2003, vol. 51, pp. 1871-81.10.1016/S1359-6454(02)00594-3 ↗
7. A. Dumay, J.-P. Chateau, S. Allain, S. Migot, O. Bouaziz: Mater. Sci. Eng., 2008, vol. A483-484, pp. 184-7.10.1016/j.msea.2006.12.170 ↗
8. O. Bouaziz, S. Allain, C.P. Scott, P. Cugy, D. Barbier: Curr. Opin. Solid State Mater. Sci., 2011, vol. 15, pp. 141-68.10.1016/j.cossms.2011.04.002 ↗
9. T. Sahraoui, M. Hadji, M. Yahi: Mater. Sci. Eng., 2009, vol. A523, pp. 271-6.10.1016/j.msea.2009.06.022 ↗
10. A. Mayyas, A. Qattawi, M. Omar, D. Shan: Renewable Sustainable Energy Rev., 2012, vol. 16, pp. 1845-62.10.1016/j.rser.2012.01.012 ↗
11. R. Kuziak, R. Kawalla, S. Waengler: Arch. Civ. Mech. Eng., 2008, vol. 8 pp. 103-17.10.1016/S1644-9665(12)60197-6 ↗
12. H. Huang, D. Gan, P.W. Kao: Scr. Metall. Mater., 1994, vol. 30, pp. 499-504.10.1016/0956-716X(94)90610-6 ↗
13. W.K. Choo, J.H. Kim, J.C. Yoon: Acta Mater., 1997, vol. 45, pp. 4877-85.10.1016/S1359-6454(97)00201-2 ↗
14. K. Sato, K. Tagawa, Y. Inoue: Metall. Trans. A, 1990, vol. 21A, pp. 5-11.10.1007/BF02656419 ↗
15. C.L. Lin, C.G. Chao, H.Y. Bor, T.F. Liu: Mater. Trans., 2010, vol. 51, pp. 1084-8.10.2320/matertrans.M2010013 ↗
16. K.T. Luo, P.-W. Kao, D. Gan: Mater. Sci. Eng., 1992, vol. A151, pp. L15-8.10.1016/0921-5093(92)90195-7 ↗
17. S.Y. Han, S.Y. Shin, H.-J. Lee, B.-J. Lee, S. Lee, N.J. Kim, J.-H. Kwak: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 843-53.10.1007/s11661-011-0942-2 ↗
18. G. Frommeyer, U. Brüx: Steel Res. Int., 2006, vol. 77, pp. 627-33.10.1002/srin.200606440 ↗
19. R. Rana, C. Liu, R.K, Ray: Scr. Mater., 2013, vol. 68, pp. 354-9.10.1016/j.scriptamat.2012.10.004 ↗
20. S.S. Sohn, H. Song, B.-C. Suh, J.-H. Kwak, B.-J. Lee, N.J. Kim, S. Lee: Acta Mater., 2015, vol. 96, pp. 301-10.10.1016/j.actamat.2015.06.024 ↗
21. D. Raabe, D. Ponge, O. Dmitrieva, B. Sander: Scr. Mater., 2009, vol. 60, pp. 1141-4.10.1016/j.scriptamat.2009.02.062 ↗
22. C.M. Tamarelli: The Evolving Use of Advanced High-Strength Steels for Automotive Applications, p. 16, Steel Market Development Institute, Michigan, 2011.
23. H. Kim, D.-W. Suh, N.J. Kim: Sci. Technol. Adv. Mater., 2013, vol. 14, pp. 1-11.10.1088/1468-6996/14/1/014205 ↗
24. K.-G Chin, C.-Y. Kang, S.Y. Shin, S. Hong, S. Lee, H.S. Kim, K.-H. Kim, N.J. Kim: Mater. Sci. Eng., 2011, vol. A528, pp. 2922-8.10.1016/j.msea.2010.12.085 ↗
25. O. Grässel, L. Krüger, G. Frommeyer, L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391-409.10.1016/S0749-6419(00)00015-2 ↗
26. J.H. Ryu, D.-I. Kim, H.S. Kim, H.K.D.H. Bhadeshia, D.-W. Suh: Scr. Mater., 2010, vol. 63, pp. 297-9.10.1016/j.scriptamat.2010.04.020 ↗
27. A. Zargaran, H.S. Kim, J.H. Kwak, N.J. Kim: Met. Mater. Int., 2015, vol. 21, pp. 79-84.10.1007/s12540-015-1009-5 ↗
28. N. Isasti, D. Jorge-Badiola, M.L. Taheri, P. Uranga: Met. Mater. Int., 2014, vol. 20, pp. 807-17.10.1007/s12540-014-5002-1 ↗
29. J.H. Kim, S.G. Park, S.H. Kim, B.H. Kim, D.J. Kim: Korea J. Met. Mater., 2014, vol. 52, pp. 597-604.10.3365/KJMM.2014.52.8.597 ↗
30. S.H. Bae, H.W. Lee: Korea J. Met. Mater., 2014, vol. 52, pp. 631-6.10.3365/KJMM.2014.52.8.631 ↗
31. C.Y. Chao, T.F. Liu: Metall. Trans. A, 1993, vol. 24A, pp. 1957-63.10.1007/BF02666330 ↗
32. I. Gutierrez-Urrutia, D. Raabe: Scr. Mater., 2013, vol. 68, pp. 343-7.10.1016/j.scriptamat.2012.08.038 ↗
33. S.S. Sohn, B.-J. Lee, S. Lee, J.-H. Kwak: Acta Mater., 2013, vol. 61, pp. 5626-35.10.1016/j.actamat.2013.06.004 ↗
34. Y. Shen, B. Ji, X. Zhou: Met. Mater. Int., 2014, vol. 20, pp. 503-6.10.1007/s12540-014-3014-5 ↗
35. K. Choi, C.-H. Seo, H. Lee, S.K. Kim, J.H. Kwak, K.G. Chin, K.-T. Park, N.J. Kim: Scr. Mater., 2010, vol. 63, pp. 1028-31.10.1016/j.scriptamat.2010.07.036 ↗
36. C.-L. Lin, C.-G. Chao, J.-Y. Juang, J.-M. Yang: J. Alloys Comp., 2014, vol. 586, pp. 616-20.10.1016/j.jallcom.2013.10.153 ↗
37. M. Charleux, W.J. Poole, M. Militzer, A. Deschamps: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1635-47.10.1007/s11661-001-0142-6 ↗
38. S.S. Sohn, B.-J. Lee, J.-H. Kwak, S. Lee: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 3844-56.10.1007/s11661-014-2332-z ↗
39. M.K. Kulekci: Int. J. Adv. Manuf. Technol., 2008, vol. 39, pp. 851-65.10.1007/s00170-007-1279-2 ↗
40. W.-C. Cheng, S.-M. Hwang: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1760-6.10.1007/s11661-010-0597-4 ↗
41. H.J. Jun, S.H. Park, S.D. Choi, C.G. Park: Mater. Sci. Eng., 2004, vol. A379, pp. 204-9.10.1016/j.msea.2004.01.029 ↗
42. S.S. Sohn, B.-J. Lee, S. Lee, N.J. Kim, J.-H. Kwak: Acta Mater., 2013, vol. 61, pp. 5050-66.10.1016/j.actamat.2013.04.038 ↗
43. S.S. Sohn, B.-J. Lee, S. Lee, J.-H. Kwak: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5469-85.10.1007/s11661-014-2502-z ↗
44. Y. Sutou, N. Kamiya, R. Umino, I. Ohnuma, K. Ishida: ISIJ Int., 2010, vol. 50, pp. 893-9.10.2355/isijinternational.50.893 ↗
45. J.-B. Seol, D. Raabe, P. Choi, H.-S. Park, J.-H. Kwak, C.G. Park: Scr. Mater., 2013, vol. 68, pp. 348-53.10.1016/j.scriptamat.2012.08.013 ↗
46. D.A. Porter, K.E. Easterling, M.Y. Sherif: Phase Transformations in Metals and Alloys, 3rd ed., p. 107, CRC Press, New York, 2008.
47. L. Storojeva, D. Ponge, R. Kaspar, D. Raabe: Acta Mater., 2004, vol. 52, pp. 2209-20.10.1016/j.actamat.2004.01.024 ↗
48. S. Chattopadhyay, C.M. Sellars: Acta Metall., 1982, vol. 30, pp 157-70.10.1016/0001-6160(82)90055-4 ↗
49. A. Shabashov, L.G. Korshunov, A.G. Mukoseev, V.V. Sagaradze, A.V. Makarov, V.P. Pilyugin, S.I. Novikov, N.F. Vildanova: Mater. Sci. Eng., 2003, vol. A346, pp. 196-207.10.1016/S0921-5093(02)00549-X ↗
50. Z. Shen, R.H. Wagoner, W.A.T. Clark: Acta Metall., 1988, vol. 36, pp. 3231-42.10.1016/0001-6160(88)90058-2 ↗
51. P. Jacques, E. Girault, T. Catlin, N. Geerlofs, T. Kop, S. van der Zwaag, F. Delannay: Mater. Sci. Eng., 1999, vol. A273-275, pp. 475-9.10.1016/S0921-5093(99)00331-7 ↗
52. K. Wallin, T. Saario, K. Törrönen: Int. J. Fract., 1987, vol. 32, pp. 201-9.10.1007/BF00018353 ↗
53. A.V. Makarov, R.A. Savrai, V.M. Schastlivtsev, T.I. Tabatchikova, L.Y. Egorova: Phys. Met. Metall., 2007, vol. 104, pp. 522-34.10.1134/S0031918X07110129 ↗
54. A. Valiente, J. Ruiz, M. Elices: Eng. Fract. Mech., 2005, vol. 72, pp. 709-28.10.1016/j.engfracmech.2004.06.004 ↗
55. S.Y. Han, S.Y. Shin, S. Lee, N.J. Kim, J.-H. Kwak, K.-G. Chin: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 138-46.10.1007/s11661-010-0456-3 ↗