journal article·2010-04

Modeling of Grain Size Distributions during Single Hit Deformation of a Nb-Containing Steel

Amrita Kundu, Claire Davis, Martin Strangwood

Publisher page

Abstract

A homogenized (to remove segregation effects from continuous casting) 0.046 wt pct Nb-microalloyed steel was used to examine the validity of the Dutta–Sellars equation in describing the degree of recrystallization, grain size distributions, and the influence of precipitation at this Nb level for deformation between 1248 and 1348 K (975 and 1075 °C). Using the Dutta–Sellars equations with the mode grain size overestimated the degree of recrystallization for deformation at temperatures above 1283 K (1010 °C), while modeling the behavior for individual grain size classes gave better agreement for the degree of recrystallization and also predicted the resulting grain size distributions. Within the conditions studied (reaustenitization at 1498 K (1225 °C) and single hit thermomechanical simulation with 0.3 strain, 10-second hold), there was no effect of strain-induced precipitation on the extent of recrystallization detected.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. S.J. Wu and C.L. Davis: Mater. Sci. Eng., A, 2004, vols. 387–389, pp. 456–60.
2. M.T. Shehata and J.D. Boyd: Proc. Conf. Advances in the Physical Metallurgy and Applications of Steels, Book 284, Liverpool, 1982, The Metals Society, London, 1982, pp. 229–36.
3. D. Chakrabarti: Ph.D. Thesis, University of Birmingham, Birmingham, United Kingdom, 2007, p. 257.
4. C.L. Davis: Trans. Indian Inst. Met., 2006, vol. 59, pp. 695–710.
5. T. Gladman: The Physical Metallurgy of Microalloyed Steels, Book 615, The Institute of Materials, London, 1997, pp. 240–41.
6. D. Talbot, C.L. Davis, and M. Strangwood: Proc. 32nd Annual IMS Convention on “Understanding Processing/Structure/Property/Behaviour Correlations,” Microstructural Science, ASM INTERNATIONAL, Materials Park, OH, 2000, vol. 27, pp. 56–65.
7. T. Tanaka: Int. Met. Rev., 1981, vol. 26, pp. 185–212.10.1179/imr.1981.26.1.185 ↗
8. E.J. Palmiere, C.I. Garcia, and A.J. DeArdo: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 951–60.10.1007/BF02649763 ↗
9. B. Dutta and C.M. Sellars: Mater. Sci. Technol., 1987, vol. 3, pp. 197–206.10.1179/mst.1987.3.3.197 ↗
10. B. Dutta, E. Valdes, and C.M. Sellars: Acta Metall. Mater., 1992, vol. 40, pp. 653–62.10.1016/0956-7151(92)90006-Z ↗
11. B. Dutta, E.J. Palmiere, and C.M. Sellars: Acta Mater., 2001, vol. 49, pp. 785–94.10.1016/S1359-6454(00)00389-X ↗
12. K.J. Irvine, F.B. Pickering, and T. Gladman: J. Iron Steel Inst., 1967, vol. 205, pp. 161–82.
13. C.M. Sellars: The Physical Metallurgy of Hot Working; Proc. Conf. on “Hot Working and Forming Processes,” Book 264, The Metals Society, London, 1980, pp. 3–15.
14. A. Le Bon, J. Rofes-Vernis, and C. Rossard: Met. Sci., 1975, vol. 9, pp. 36–40.10.1179/030634575790444919 ↗
15. I. Kozasu, C. Ouchi, T. Sampei, and T. Okita: Microalloying 75, Proc. International Symposium on High-Strength Low-Alloy Steels, Washington DC, 1975, Union Carbide Corp., New York, 1977, p. 120.
16. H. Weiss, A. Gittings, G.G. Brown, and W.J. McG Tegart: J. Iron Steel Inst., 1973, vol. 211, pp. 703–09.
17. O. Kwon and A.J. DeArdo: Acta Metall. Mater., 1991, vol. 39, pp. 529–38.10.1016/0956-7151(91)90121-G ↗
18. B. Dutta and E.J. Palmiere: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1237–47.10.1007/s11661-003-0234-6 ↗
19. C.M. Sellars and J.A. Whiteman: Met. Sci., 1979, vol. 13, pp. 187–93.10.1016/0036-9748(79)90290-4 ↗