Neutron and X-ray Microbeam Diffraction Studies around a Fatigue-Crack Tip after Overload
Source abstract
Abstract
An in-situ neutron diffraction technique was used to investigate the lattice-strain distributions and plastic deformation around a crack tip after overload. The lattice-strain profiles around a crack tip were measured as a function of the applied load during the tensile loading cycles after overload. Dislocation densities calculated from the diffraction peak broadening were presented as a function of the distance from the crack tip. Furthermore, the crystallographic orientation variations were examined near a crack tip using polychromatic X-ray microdiffraction combined with differential aperture microscopy. Crystallographic tilts are considerably observed beneath the surface around a crack tip, and these are consistent with the high dislocation densities near the crack tip measured by neutron peak broadening.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Non-Destructive Testing Techniques · Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. D.L. Davidson: Eng. Fract. Mech., 1991, vol. 38, pp. 393–40210.1016/0013-7944(91)90091-E ↗
2. M. Okayasu, D.L. Chen, Z.R. Wang: Eng. Fract. Mech., 2006, vol. 73, pp. 1117–3210.1016/j.engfracmech.2006.01.001 ↗
3. S.L. Wong, P.E. Bold, M.W. Brown, R.J. Allen: Fatigue Fract. Eng. Mater. Struct., 2000, vol. 23, pp. 659–6610.1046/j.1460-2695.2000.00341.x ↗
4. D. Gan, J. Weertman: Eng. Fract. Mech., 1981, vol. 15, pp. 87–10610.1016/0013-7944(81)90108-9 ↗
5. A. Guvenilir, T.M. Breunig, J.H. Kinney, S.R. Stock: Acta Mater., 1997, vol. 45, pp. 1977–8710.1016/S1359-6454(96)00311-4 ↗
6. I.R. Wallhead, L. Edwards, P. Poole: Eng. Fract. Mech., 1998, vol. 60, pp. 291–30210.1016/S0013-7944(98)00025-3 ↗
7. W. Elber: ASTM STP 486, ASTM, Philadelphia, PA, pp. 230–42
8. V.S. Sarma, G. Jaeger, A. Koethe: Int. J. Fatigue, 2001, vol. 23, pp. 741–4510.1016/S0142-1123(01)00035-4 ↗
9. M. Andersson, C. Persson, S. Melin: Int. J. Fatigue, 2006, vol. 28, pp. 1059–6810.1016/j.ijfatigue.2005.11.005 ↗
10. C.K. Clarke, G.C. Cassatt: Eng. Fract. Mech., 1977, vol. 9, pp. 675–8810.1016/0013-7944(77)90080-7 ↗
11. Y. Sun, H. Choo, P.K. Liaw, Y. Lu, B. Yang, D.W. Brown, M.A.M. Bourke: Scripta Mater., 2005, vol. 53, pp. 971–7510.1016/j.scriptamat.2005.06.019 ↗
12. Y. Sun, K. An, F. Tang, C.R. Hubbard, Y.L. Lu, H. Choo, P.K. Liaw: Physica B, 2006, vol. 385, pp. 633–3510.1016/j.physb.2006.06.088 ↗
13. H. Mughrabi: Acta Metall., 1983, vol. 31, pp. 1367–7910.1016/0001-6160(83)90007-X ↗
14. T. Ungar, I. Dragomir, A. Revesz, A. Borbely: J. Appl. Crystallogr., 1999, vol. 32, pp. 992–100210.1107/S0021889899009334 ↗
15. R. Barabash: Mater. Sci. Eng. A, 2001, vol. 309, pp. 49–5410.1016/S0921-5093(00)01663-4 ↗
16. B.C. Larson, W. Yang, G.E. Ice, J.D. Budai, J.Z. Tischler: Nature, 2002, vol. 415, pp. 887–9010.1038/415887a ↗
17. G.E. Ice, B.C. Larson, W. Yang, J.D. Budai, J.Z. Tischler, J.W.L. Pang, R.I. Barabash, W. Liu: J. Synchrot. Radiat., 2005, vol. 12, pp. 155–6210.1107/S0909049504026949 ↗
18. G.E. Ice, J.W.L. Pang, R.I. Barabash, Y. Puzyrev: Scripta Mater., 2006, vol. 55, pp. 57–6210.1016/j.scriptamat.2006.02.046 ↗
19. “ASTM Standard E 647-99: Standard Test Method for Measurement of Fatigue Crack- Growth Rates,” ASTM, Philadelphia, PA, 2000, vol. 03.01, pp. 591–630
20. S.Y. Lee, Y.L. Lu, P.K. Liaw, H. Choo, S.A. Thompson, J.W. Blust, P.F. Browning, A.K. Bhattacharya, J.M. Aurrecoechea, D.L. Klarstrom: Mech. Time-Depend. Mater., 2008, vol. 12, pp. 31–4410.1007/s11043-008-9049-6 ↗
21. M.A.M. Bourke, D.C. Dunand, E. Ustundag: Appl. Phys. Lett., 2002, vol. 74, pp. S1707–S1709
22. H.M. Rietveld: J. Appl. Crystallogr., 1969, vol. 2, pp. 65–7110.1107/S0021889869006558 ↗
23. A.C. Larson and R.B. Von Dreele: “General Structure Analysis System,” Los Alamos National Laboratory Report LAUR, Los Alamos National Laboratory, Los Alamos, NM, 2004, pp. 86–748
24. E.-W. Huang, R.I. Barabash, Y.D. Wang, B. Clausen, L. Li, P.K. Liaw, G.E. Ice, Y. Ren, H. Choo, L.M. Pike, and D.L. Klarstrom: Int. J. Plasticity, 2008, vol. 24, pp. 1440–5610.1016/j.ijplas.2007.10.001 ↗
25. G.E. Ice and R.I. Barabash: in Dislocations in Solids, F.R.N. Nabarro and J.P. Hirth, eds., Elsevier, 2007, vol. 13, chap. 79, pp. 500–601