journal article·2005-03

Microstructure, properties, and age hardening behavior of a thermomechanically processed ultralow-carbon cu-bearing high-strength steel

A. Ghosh, S. Chatterjee, B. Mishra, S. Das

Publisher page

Abstract

An ultralow-carbon steel alloyed with Ni, Mn, Mo, and Cu and microalloyed with Nb and Ti was subjected to a three-stage controlled rolling operation followed by water quenching. The effect of thermomechanical processing on the microstructure, mechanical properties, and age-hardening behavior of the steel was evaluated. The precipitation behavior of Cu at different aging temperatures was studied by transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). The high strength values obtained in the present steel are due to the fine-lath martensite structure along with tiny precipitates of microalloying carbide and carbonitride of Ti and Nb at all finish rolling temperatures (FRTs). The increased strength value at the lower FRT is due to the finer lath width and packet size of martensite. The large TiN particles and the coarse martensite-austenite (MA) constituents impaired the impact-toughness value of the steel at subambient temperature. On aging at different temperatures, a wide variation in structure and properties has been obtained. At low aging temperatures, coherent Cu particles form and a peak strength is obtained due to the formation of fine ε-Cu precipitates. On increasing aging temperatures, the Cu particle size increases, with a simultaneous decrease in dislocation density in the matrix resulting in a continuous decrease in strength.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. A.D. Wilson: Proc. Int. Symp. on High Performance Steels for Structural Applications, Cleveland, OH, 1995, pp. 99–107.
2. A.J. DeArdo: Iron Steel Inst. Jpn. Int., 1995, vol. 35 (8), pp. 946–954.10.2355/isijinternational.35.946 ↗
3. M.G. Vassilaros and E.J. Czyryca: Key Eng. Mater., 1993, vols. 84–85, pp. 587–601.10.4028/www.scientific.net/KEM.84-85.587 ↗
4. S. Das, A. Ghosh, S. Chatterjee, and P. Ramachandrarao: Scripta Metall., 2003, vol. 48, pp. 51–58.10.1016/S1359-6462(02)00345-7 ↗
5. C.I. Garcia, M. Mujahid, and A.J. DeArdo: Proc. Int. Symp. on High Performance Steels for Structural Applications, Cleveland, OH, 1995, pp. 135–40.
6. A. Ghosh, S. Das, S. Chatterjee, Brajendra Mishra, and P. Ramachandrarao: Mater. Sci. Eng. (A), 2003, vol. 348, pp. 299–308.10.1016/S0921-5093(02)00735-9 ↗
7. E.J. Czyryca: Key Eng. Mater., 1993, vols. 84–85, pp. 491–520.10.4028/www.scientific.net/KEM.84-85.491 ↗
8. A. Ghosh, P.S. Banerjee, and S. Chatterjee: Proc. Industrial Corrosion Causes and Migration CORCON-2000, Quest Publications, Mumbai, 2000, vol. 1, pp. 767–74.
9. K. Banarjee and U.K. Chatterjee: Scripta Metall., 2001, vol. 44, pp. 213–16.10.1016/S1359-6462(00)00594-7 ↗
10. J.Y. Yoo, W.Y. Choo, T.W. Park, and Y.W. Kim: Iron Steel Inst. Jpn. Int., 1995, vol. 35 (8), pp. 1034–40.10.2355/isijinternational.35.1034 ↗
11. G.C. Hwang, S. Lee, J.Y. Yoo, and W.Y. Choo: Mater. Sci. Eng. (A), 1998, vol. 252, pp. 256–68.10.1016/S0921-5093(98)00670-4 ↗
12. A.D. Wilson, E.G. Hamburg, D.J. Colvin, S.W. Thompson, and G. Krauss: Proc. Int. Conf. on Microalloyed HSLA Steel, Microalloying’88, ASM INTERNATIONAL, Metals Park, OH, 1988, pp. 259–75.
13. S.K. Dhua, D. Mukherjee, and D.S. Sarma: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2259–70.10.1007/s11661-001-0201-z ↗
14. M. Kujahid, A.K. Lis, C.J. Garcia, and A.J. DeArdo: J. Mater. Eng. Performance, 1988, vol. 7, pp. 247–57.10.1361/105994998770347981 ↗
15. A.N. Bhagat, S.K. Pabi, S. Ranganathan, and O.N. Mohanty: Iron Steel Inst. Jpn. Int., 2004, vol. 44 (1), pp. 115–22.10.2355/isijinternational.44.115 ↗
16. S.S. Ghasemi Bahadkokki, D. Yu, and D.P. Dunne: Iron Steel Inst. Jpn. Int., 1996, vol. 36 (1), pp. 61–67.10.2355/isijinternational.36.61 ↗
17. S. Das, A. Ghosh, S. Chatterjee, and P. Ramachandrarao: Scand. J. Met., 2002, vol. 31, pp. 272–80.10.1034/j.1600-0692.2002.10597.x ↗
18. S. Das, A. Ghosh, S. Chatterjee, and P. Ramachandrarao: Scand. J. Met., 2004, vol. 33, pp. 203–10.10.1111/j.1600-0692.2004.00684.x ↗
19. Z. Xiaogong, X. Dianpel, A. Liege, and Y. Weixun: Proc. HSLA Steels Processing, Properties and Applications, TMS, Warrendale, PA, 1992, pp. 171–76.
20. Y. Qilong, L. Yongfu, Z. Kunyu, and W. Baorong: Proc. HSLA Steels Processing, Properties and Applications, TMS, Warrendale, PA, 1992, pp. 191–96.
21. Q. Yonglan: Proc. HSLA Steels Processing, Properties and Applications, TMS, Warrendale, PA, 1992, pp. 209–16.
22. Z. Juanying, C. Kedong, and F. Zuobao: Proc. HSLA Steels Processing, Properties and Applications, TMS, Warrendale, PA, 1992, pp. 287–90.
23. A.C. Kneissl, C.I. Garcia, and A.J. DeArdo: Proc. HSLA Steels Processing, Properties and Applications, TMS, Warrendale, PA, 1992, pp. 99–106.
24. S. Akhlaghi and D.G. Ivey: Can. Metall. Q., 2002, vol. 41 (1), pp. 111–19.10.1179/cmq.2002.41.1.111 ↗
25. J. Kunze, C. Mickel, G. Backmann, B. Beyer, M. Reibold, and C. Klinkenberg: Steel Res, 1997, vol. 68 (10), pp. 441–49.10.1002/srin.199700580 ↗
26. S. Das, A. Ghosh, S. Chatterjee, and P. Ramachandrarao: Mater. Characterization, 2003, vol. 50, pp. 305–15.10.1016/j.matchar.2003.07.001 ↗
27. D.P. Dunne, S.S. Ghasemi Banadkouki, and D. Yu: Iron Steel Inst. Jpn. Int., 1996, vol. 36 (3), pp. 324–33.10.2355/isijinternational.36.324 ↗
28. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Mater. Trans A, 1996, vol. 27A, pp. 1557–71.10.1007/BF02649815 ↗
29. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Trans A, 1990, vol. 21A, pp. 1493–507.10.1007/BF02672564 ↗
30. N. Maruyama, M. Sugiyama, T. Hara, and H. Tamehiro: Mater. Trans. JIM, 1999, vol. 40 (4), pp. 268–77.10.2320/matertrans1989.40.268 ↗
31. J.W. Edington: Monographs in Practical Electron Microscopy in Material Science, The Macmillan Press Ltd., London, 1976, vol. 4, pp. 9–14.
32. E. Hornbogen and R.C. Glenn: Trans. TMS-AIME, 1960, vol. 121, pp. 1064–70.
33. T. Tanaka, N. Tabata, and T. Hatomura: Proc. Microalloying ’75, Union Carbide Corp., New York, NY, 1977, pp. 107–19.
34. K.J. Irvine, F.B. Pickering, and T. Gladman: J. Iron Steel Inst., 1967, vol. 205, p. 161.
35. T. Gladman, D. Dulien, and D.I. McIvoy: Proc. Microalloying ’75, Union Carbide Corp., New York, NY, 1977, pp. 32–58.
36. S.F. Medina, M. Chapa, P. Valles, A. Quispe, and M.I. Vega: Iron Steel Inst. Jpn. Int., 1999, vol. 39 (9), pp. 930–36.10.2355/isijinternational.39.930 ↗
37. M. Prikryl, A. Kroupa, G.C. Weatherly, and S.V. Subramanian: Metall. Mater. Trans A, 1996, vol. 27A, pp. 1149–65.10.1007/BF02649854 ↗
38. D.P. Fairchild, D.G. Howden, and W.A.T. Clark: Proc. Int. Symp. on High Performance Steels for Structural Applications, Cleveland, OH, 1995, pp. 235–46.
39. L.P. Zhang, C.L. Davis, and M. Strangwood: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1147–54.10.1007/s11661-001-0125-7 ↗
40. M.A. Linaza, J.L. Romero, J.M. Rodriguez-Ibabe, and J.J. Urcola: Scripta Metall. Mater., 1993, vol. 29, pp. 451–56.10.1016/0956-716X(93)90146-J ↗
41. D. Tian, L.P. Karja lainen, B. Qian, and X. Chan: Scand. J. Metall., 1996, vol. 25, pp. 87–94.
42. Metals Handbook, 8th ed., vol. 8, Metallography, Structures and Phase Diagrams, ASM, Metals Park, OH, 1973, pp. 275–76.