journal article·2005-10

Diamond cutting tools with a Ni3Al matrix processed by reaction pseudo-hipping

K. S. Hwang, T. H. Yang, S. C. Hu

Publisher page

Abstract

Nickel aluminide, Ni3Al, has high hot strength, which could help overcome the high heat and the interrupted vibrations that diamond cutting tools encounter during operation. Reaction pseudo-hipping, on the other hand, require only a short dwell time at high temperatures, which are detrimental to the diamond grits. Thus, it is promising to combine the unique nickel aluminide with the unique reaction pseudo-hipping process and replace the commonly used cobalt matrix. This study reports for the first time the process and application of reaction-pseudo-hipped Ni3Al matrix for diamond tools. In this work, mixtures of elemental nickel, aluminum, boron powder, and diamond particles are reaction-pseudo-hipped. Densities greater than 99 pct and mechanical properties comparable to those of the cobalt are attained. With high-grade diamond grits, the tools thus prepared show, under dry cutting conditions, a grinding ratio 118 pct higher than that with the cobalt matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. A. Bütter: Industrial Diamond Rev., 1974, vol. 34, pp. 89–93.
2. Y.S. Liao and S.Y. Luo: Wear, 1992, vol. 157, pp. 325–37.10.1016/0043-1648(92)90070-O ↗
3. J. Konstanty: Key Eng. Mater., 2003, vol. 250, pp. 13–20.10.4028/www.scientific.net/KEM.250.13 ↗
4. S.W. Webb: Diamond Related Mater., 1999, vol. 8 (11), pp. 2043–52.10.1016/S0925-9635(99)00167-3 ↗
5. Y.S. Liao and S.Y. Luo: J. Mater. Sci., 1993, vol. 28, pp. 1245–51.10.1007/BF01191959 ↗
6. A. Romanski, H. Frydrych, and J. Konstanty: Proc. Int. Workshop on Diamond Tool Production, Turin, Italy, European Powder Metallurgy Association, Shrewsbury, UK, 1999, pp. 191–96.
7. D.A. Akyüz and H. Hofmann: Proc. 1998 PM World Congr., Hard Materials, European Powder Metallurgy Association, Shrewsbury, UK, 1998, vol. 2, pp. 158–63.
8. Z.A. Munir and U. Anselmi-Tamburini: Materials Science Reports, North-Holland, Amsterdam, 1989, vol. 3, pp. 277–365.
9. K.A. Philpot, Z.A. Munir, and J.B. Holt: J. Mater. Sci., 1987, vol. 22, pp. 159–69.10.1007/BF01160566 ↗
10. E.A. Levashov, I. Borovinskaya, A. Rogachov, M. Ohyanagi, and S. Hosomi: Int. J. Self-Propagation High-Temp. Sympthesis, 1993, vol. 2 (2), pp. 189–201.
11. K.L. Padyukov, A.G. Kost, E.A. Levashov, I.P. Borovinskaya, and Y.V. Bogatov: Int. J. Self-Propagating High-Temp. Synthesis, 1992, vol. 1 (3), pp. 443–46.
12. K.L. Padyukov and E.A. Levashov: Diamond Related Mater., 1993, vol. 2, pp. 207–10.10.1016/0925-9635(93)90054-6 ↗
13. A. Aoki and O. Izumi: J. Jpn. Inst. Met., 1979, vol. 43, pp. 1190–94.10.2320/jinstmet1952.43.12_1190 ↗
14. C.T. Liu, C.L. White, and J.A. Horton: Acta Metall., 1985, vol. 33, pp. 213–19.10.1016/0001-6160(85)90139-7 ↗
15. T.N. Tiegs, K.B. Alexander, K.P. Plucknett, P.A. Menchhofer, P.F. Becher, and S.B. Waters: Mater. Sci. Eng., 1996, vol. 209A, pp. 243–47.10.1016/0921-5093(95)10128-4 ↗
16. V. Weihnacht, W.D. Fan, K. Jagannadham, J. Narayan, and C.T. Liu: J. Mater. Res., 1996, vol. 11 (9), pp. 2220–30.10.1557/JMR.1996.0282 ↗
17. A. Bose, B.H. Rabin, and R.M. German: Powder Metall. Int., 1988, vol. 20 (3), pp. 25–30.
18. K.S. Hwang and Y.C. Lu: Powder Metall. Int., 1992, vol. 24 (5), pp. 1–10.
19. R.M. German and A. Bose: Mater. Sci. Eng., 1989, vol. 107A, pp. 107–16.10.1016/0921-5093(89)90379-1 ↗
20. Metals Handbook, 10th ed., ASMINTERNATIONAL, Materials Park, OH, 1990, vol. 2, pp. 1109–10.
21. J. Konstanty, A. Bunsch, and A. Cias: Powder Metall. Int., 1991, vol. 23 (6), pp. 354–56.