journal article·2008-10

An Experimental Assessment of the Effects of Heat Treatment on the Microstructure of Ti-47Al-2Cr-2Nb Powder Compacts

O. Berteaux, F. Popoff, M. Thomas

Publisher page

Abstract

A detailed and systematic microstructural characterization has been carried out on a Ti-47Al-2Cr-2Nb (at. pct) intermetallic alloy processed by powder metallurgy (PM). Heat-treatment parameters such as isothermal temperature, holding time, and cooling rate were varied in order to produce a series of near-γ, duplex, and fully lamellar microstructures. These were then quantitatively analyzed in terms of grain size, surface fraction, lamellar spacing, second-phase spatial distribution, and serrated grain boundary morphology. Owing to these extensive quantitative image analyses, several unusual microstructural features occurring in this well-known TiAl-based alloy were identified and assessed. First, a dissolution of the smallest γ grains was emphasized in subtransus conditions as the isothermal temperature or holding time was increased. Second, the competition that occurs between the α ⇒ α + γ transformation and the direct-ordering α ⇒ α 2 reaction upon cooling from above the α-transus temperature is mainly governed by the reduction in chemical free energy. Third, new grains were found to nucleate upon cooling, which is presumably induced by a minimization of interfacial energy at prior α grain boundaries. Finally, new γ grains were formed as a result of the coarsening of primary γ lamellae under furnace-cooled (FC) conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metallic Glasses and Amorphous Alloys · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Y.-W. Kim: JOM, 1989, vol. 41, pp. 24–3010.1007/BF03220267 ↗
2. Y.-W. Kim, D.M. Dimiduk: JOM, 1991, vol. 43, pp. 40–4710.1007/BF03221103 ↗
3. C.M. Austin, T.J. Kelly, K.G. McAllister, J.C. Chesnutt: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 413–25
4. R.E. Schafrik: in Structural Intermetallics 2001, K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, J.D. Whittenberger, eds., TMS, Warrendale, PA, 2001, pp. 13–17
5. W. Smarsly, H. Baur, G. Glitz, H. Clemens, T. Khan, M. Thomas: in Structural Intermetallics 2001, K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, J.D. Whittenberger, eds., TMS, Warrendale, PA, 2001, pp. 25–34
6. P. Bartolotta, J. Barrett, T. Kelly, R. Smashey: JOM, 1997, vol. 49, pp. 48–50 and 7610.1007/BF02914685 ↗
7. H. Clemens, H. Kestler, N. Eberhardt, W. Knabl: in Gamma Titanium Aluminides 1999, Y.-W. Kim, D.M. Dimiduk, M.H. Loretto, eds., TMS, Warrendale, PA, 1999, pp. 209–24
8. C.F. Yolton, Y.-W. Kim, U. Habel: in Gamma Titanium Aluminides 2003, Y.-W. Kim, H. Clemens, A.H. Rosenberger, eds., TMS, Warrendale, PA, 2003, pp. 233–40
9. M.J. Weimer and T.J. Kelly: 3rd Int. Workshop on γ-TiAl Technologies, Bamberg, Germany, 2006
10. M. Yamaguchi, H. Inui: in Structural Intermetallics 1993, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 127–42
11. N. Biery, M. De Graef, J. Beuth, R. Raban, A. Elliott, C. Austin, T.M. Pollock: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3127–3610.1007/s11661-002-0298-8 ↗
12. S.K. Jha, J.M. Larsen, A.H. Rosenberger: Acta Mater., 2005, vol. 53, pp. 1293–130410.1016/j.actamat.2004.11.022 ↗
13. T.R. Bieler, A. Fallahi, B.C. Ng, D. Kumar, M.A. Crimp, B.A. Simkin, A. Zamiri, F. Pourboghrat, D.E. Mason: Intermetallics, 2005, vol. 13, pp. 979–8410.1016/j.intermet.2004.12.013 ↗
14. L.L. Rothenflue, H.A. Lipsitt: in Titanium ‘95: Science and Technology, P.A. Blenkinsop, W.J. Evans, H.M. Flower, eds., The Institute of Materials, London, 1996, pp. 176–83
15. M. Krishnan, B. Natarajan, V.K. Vasudevan, D.M. Dimiduk: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 235–44
16. H. Clemens, A. Bartels, S. Bystrzanowski, H. Chladil, H. Leitner, G. Dehm, R. Gerling, F.P. Schimansky: Intermetallics, 2006, vol. 14, pp. 1380–8510.1016/j.intermet.2005.11.015 ↗
17. R.T. Zheng, Y.G. Zhang, C.Q. Chen, G.A. Cheng, C.L. Liang, X.J. Li: J. Mater. Proc. Technol., 2007, vol. 184, pp. 217–2310.1016/j.jmatprotec.2006.11.026 ↗
18. S.R. Dey, E. Bouzy, A. Hazotte: Scripta Mater., 2007, vol. 57, pp. 365–6810.1016/j.scriptamat.2007.04.015 ↗
19. Y.-W. Kim: Mater. Sci. Eng., A, 1995, vols. 192–193, pp. 519–3310.1016/0921-5093(94)03271-8 ↗
20. D.M. Dimiduk, T.A. Parthasarathy, P.M. Hazzledine: Intermetallics, 2001, vol. 9, pp. 875–8210.1016/S0966-9795(01)00085-1 ↗
21. M. Charpentier, D. Daloz, A. Hazotte, and E. Aeby-Gautier: Matér. Techniq., 2004, vol. 92 (1–2), pp. 39–5010.1051/mattech:2004005 ↗
22. Aphelion software developed by ADCIS: http://www.adcis.net/fr/index.html
23. O. Berteaux and M. Thomas: unpublished research, 2008
24. P. Jarry, M. Boehm, and S. Antoine: in Light Metals 2001, 130th TMS Annual Meeting, New Orleans, LA, 2001, TMS, Warrendale, PA, 2001, pp. 903–09
25. A. Denquin, S. Naka: Acta Metall. Mater., 1996, vol. 44, pp. 343–5210.1016/1359-6454(95)00167-4 ↗
26. M. Charpentier: Thèse de doctorat de l’Institut National Polytechnique de Lorraine, Ecole Nationale Supérieure des Mines de Nancy, Nancy, France, 2003.
27. V. Seetharaman, S.L. Semiatin: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 947–5410.1007/s11661-997-0225-0 ↗
28. Y. Bhambri, V.K. Sikka, W.D. Porter, E.A. Loria, T. Carneiro: Mater. Sci. Eng., A, 2006, vol. 424, pp. 361–6510.1016/j.msea.2006.03.030 ↗
29. M. Takeyama, T. Kumagai, M. Nakamura, M. Kikuchi: in Structural Intermetallics 1993, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 167–76
30. A. Chatterjee: in Euromat 99, vol. 10, Intermetallics and Superalloys, D.G. Morris, S. Naka, and P. Caron, eds., Wiley-VCH Verlag Gmbh, Weinheim, Germany, 1999, pp. 233–39
31. D. Dudzinski, L. Zhao, J. Beddoes, W. Wallace: Scripta Mater., 1996, vol. 35, pp. 367–7210.1016/1359-6462(96)00154-6 ↗
32. S.L. Semiatin, V. Seetharaman, D.M. Dimiduk, K.H.G. Ashbee: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 7–1810.1007/s11661-998-0154-6 ↗
33. G.X. Guo: Thèse de doctorat de l’ENSAM Paris, Ecole Nationale Supérieure d’Arts et Métiers, Paris, France, 2001
34. G.X. Cao, L.F. Fu, J.G. Lin, Y.G. Zhang, C.Q. Chen: Intermetallics, 2000, vol. 8, pp. 647–5310.1016/S0966-9795(99)00128-4 ↗
35. C.E. Wen, K. Yasue, J.G. Lin, Y.G. Zhang, C.Q. Chen: Intermetallics, 2000, vol. 8, pp. 525–2910.1016/S0966-9795(99)00131-4 ↗
36. G.W. Qin, G.D.W. Smith, B.J. Inkson, R. Dunin-Borkowski: Intermetallics, 2000, vol. 8, pp. 945–5210.1016/S0966-9795(00)00070-4 ↗
37. T. Novoselova, S. Malinov, W. Sha: Intermetallics, 2003, vol. 11, pp. 491–9910.1016/S0966-9795(03)00028-1 ↗
38. D.M. Dimiduk, P.M. Hazzledine, T.A. Parthasarathy, S. Seshagiri, M.G. Mendiratta: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 37–4710.1007/s11661-998-0157-3 ↗
39. R. Yang: International Titanium Aluminide Workshop, Birmingham, United Kingdom, 2004.
40. U. Prasad, M.C. Chaturvedi: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2053–6610.1007/s11661-003-0270-2 ↗
41. S. Zghal, M. Thomas, S. Naka, A. Finel, A. Couret: Acta Mater., 2005, vol. 53, pp. 2653–6410.1016/j.actamat.2005.02.025 ↗
42. W. Lefebvre, A. Loiseau, M. Thomas, A. Menand: Philos. Mag. A, 2002, vol. 82, pp. 2341–55
43. M. Lamirand, J.-L. Bonnentien, G. Ferrière, S. Guérin, J.-P. Chevalier: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2369–7810.1007/BF02586211 ↗