Wear Behavior and Mechanism of a Cr-Mo-V Cast Hot-Working Die Steel
Source abstract
Abstract
The wear behavior and mechanisms of a Cr-Mo-V cast hot-working die steel with three microstructures (tempered martensite, troostite, and sorbite) were studied systematically through the dry-sliding wear tests within a normal load range of 50 to 300 N and an ambient temperature range of 298 K to 673 K (25 °C to 400 °C) by a pin-on-disk high-temperature wear machine. Five different mechanisms were observed in the experiments, namely adhesive, abrasive, mild oxidative, oxidative, and extrusive wear; one or more of those mechanisms would be dominant within particular ranges of load and temperature. The transition of wear mechanisms depended on the formation of tribo-oxides, which was related closely to load and temperature, and their delamination, which was mainly influenced by the matrix. By increasing the load and ambient temperature, the protective effect of tribo-oxides first strengthened, then decreased, and in some cases disappeared. Under a load ranging 50 to 300 N at 298 K (25 °C) and a load of 50 N at 473 K (200 °C), adhesive wear was the dominant wear mechanism, and abrasive wear appeared simultaneously. The wear was of mild oxidative type under a load ranging 100 to 300 N at 473 K (200 °C) and a load ranging 50 to 150 N at 673 K (400 °C) for tempered martensite and tempered troostite as well as under a load of 100 N at 473 K (200 °C) and a load ranging 50 to 100 N at 673 K (400 °C) for tempered sorbite. At the load of 200 N or greater, or the temperatures above 673 K (400 °C), oxidative wear (beyond mild oxidative wear) prevailed. When the highest load of 300 N at 673 K (400 °C) was applied, extrusive wear started to dominate for the tempered sorbite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. G.B. Li, J.J. Wu, X.Z. Li, and G.Y. Li: J. Mater. Process. Tech., 1998, vol. 75, pp. 152-56.10.1016/S0924-0136(97)00318-X ↗
2. G. Castro, A. Fernandez-Vicente, and J. Cid: Wear, 2007, vol. 263, pp. 1375-85.10.1016/j.wear.2007.02.007 ↗
3. P.R. Beeley and A. Blackmore: Met. Tech., 1981, vol. 17-18, pp. 268-73.10.1179/030716981803275541 ↗
4. P.M. Bralower: Modern Cast, 1988, vol. 78, pp. 3-8.
5. P.R. Beeley: The British Foundryman, 1983, vol. 76, pp. 15-19.
6. P.R. Beeley: The British Foundryman, 1986, vol. 79, pp. 441-45.
7. O. Barrau, C. Boher, R. Gras, and F. Rezai-Aria: Wear, 2003, vol. 255, pp. 1444-54.10.1016/S0043-1648(03)00280-1 ↗
8. L.H.S. Luong and T. Heijkoop: Wear, 1981, vol. 71, pp. 93-102.10.1016/0043-1648(81)90142-3 ↗
9. Z.Y. Zhu: Mech. Eng. Mater., 2001, vol. 25, pp. 39-42 (in Chinese).
10. P.H. Hansen: Ph.D. Dissertation, Technical University of Denmark, Copenhagen, 1990.
11. Z.H. Zhang, H. Zhou, L.Q. Ren, X. Tong, H.Y. Shan, and L. Liu: Int. J. Fatigue, 2009, vol. 31, pp. 468-72.10.1016/j.ijfatigue.2008.07.003 ↗
12. S. Huth, N. Krasokha, and W. Theisen: Wear, 2009, vol. 267, pp. 449-57.10.1016/j.wear.2008.12.089 ↗
13. X.H. Cui, Ph.D. Dissertation, Jilin University, Changchun, China, 2006.
14. S.Q. Wang, K.M. Chen, X.H. Cui, Q.C. Jiang, and B. Hong: J. Iron Steel Res. Int., 2006, vol. 13, pp. 53-59.10.1016/S1006-706X(06)60095-2 ↗
15. X.H. Cui, J. Shan, Z.R. Yang, M.X. Wei, S.Q. Wang, and C. Dong: J. Iron Steel Res. Int., 2008, vol. 15, pp. 67-72.10.1016/S1006-706X(08)60146-6 ↗
16. X.H. Cui, S.Q. Wang, Q.C. Jiang, and K.M. Chen: J. Rare Earths, 2007, vol. 25, pp. 88-92.10.1016/S1002-0721(07)60051-9 ↗
17. X.H. Cui, S.Q. Wang, F. Wang, and K.M. Chen: Wear, 2008, vol. 265, pp. 468-76.10.1016/j.wear.2007.11.015 ↗
18. S.Q. Wang, F. Wang, X.H. Cui, and K.M. Chen: Mater. Lett., 2008, vol. 62, pp. 279-81.10.1016/j.matlet.2007.05.018 ↗
19. M.X. Wei, F. Wang, S.Q. Wang, and X.H. Cui: Mater. Des., 2009, vol. 30, pp. 3608-14.10.1016/j.matdes.2009.02.023 ↗
20. Y. Wang, T.Q. Lei, and J.J. Liu: Wear, 1999, vol. 231, pp. 1-11.10.1016/S0043-1648(99)00115-5 ↗
21. J.F. Archard: J. Appl. Phys., 1953, vol. 24, pp. 981-88.10.1063/1.1721448 ↗
22. C.Y.H. Lim, S.C. Lim, and M. Gupta: Wear, 2003, vol. 255, pp. 629-37.10.1016/S0043-1648(03)00121-2 ↗
23. H. So, D.S. Yu, and C.Y. Chuang: Wear, 2002, vol. 253, pp. 1004-15.10.1016/S0043-1648(02)00230-2 ↗
24. V. Abouei, H. Saghafian, and S. Kheirandish: Wear, 2007, vol. 262, pp. 1225-31.10.1016/j.wear.2006.11.009 ↗
25. T.F.J. Quinn, J.L. Sullivan, and D.M. Rowson: Tribol. Int., 1980, vol. 13, pp. 153-58.10.1016/0301-679X(80)90031-6 ↗
26. T.F.J. Quinn: Tribol. Int., 1983, vol. 16, pp. 257-71.10.1016/0301-679X(83)90086-5 ↗
27. T.F.J. Quinn: Tribol. Int., 1983, vol. 16, pp. 305-15.10.1016/0301-679X(83)90039-7 ↗
28. T.F.J. Quinn: Wear, 1998, vol. 216, pp. 262-75.10.1016/S0043-1648(98)00137-9 ↗
29. J.E. Wilson, F.H. Stott, and G.C. Wood: Proc. R. Soc., 1980, vol. A369, pp. 557-74.
30. S.Q. Wang, M.X. Wei, F. Wang, X.H. Cui, and C. Dong: Tribol. Lett., 2008, vol. 32, pp. 67-72.10.1007/s11249-008-9361-y ↗
31. E. Marui, N. Hasegawa, H. Endo, K. Tanaka, and T. Hattori: Wear, 1997, vol. 205, pp. 186-99.10.1016/S0043-1648(96)07316-4 ↗
32. Y. Wang and T.Q. Lei: Wear, 1996, vol. 194, pp. 44-53.10.1016/0043-1648(95)06705-1 ↗
33. H. So, H.M. Chen, and L.W. Chen: Wear, 2008, vol. 265, pp. 1142-48.10.1016/j.wear.2008.03.002 ↗
34. M. Pellizzari, A. Molinari, and G. Straffelini: Wear, 2005, vol. 259, pp. 1281-89.10.1016/j.wear.2004.12.006 ↗