journal article·2013-10

Effect of Processing Temperature on the Texture and Shear Mechanical Properties of Diffusion Bonded Ti-6Al-4V Multilayer Laminates

Carmen M. Cepeda-Jiménez, Alberto Orozco-Caballero, Aigul Sarkeeva, Aleksey Kruglov, Ramil Lutfullin, Oscar A. Ruano, Fernando Carreño

Publisher page

Abstract

Two multilayer materials based on Ti-6Al-4V alloy have been processed by diffusion bonding at two different temperatures [1023 K and 1173 K (750 °C and 900 °C)]. The influence of the processing temperature on microstructure, texture, and mechanical properties of the two multilayer materials has been analyzed. Scanning electron microscopy, X-ray diffraction, electron backscatter diffraction, and shear tests have been used as experimental techniques. The multilayer laminate processed at the lowest temperature of 1023 K (750 °C) exhibits mainly transversal texture in the longitudinal plane, which provides an anisotropic mechanical behavior, showing higher shear modulus and maximum shear strength under one of the shear test directions considered. In contrast, diffusion bonding at 1173 K (900 °C) leads to basal/transversal texture because of the partial α → β → α transformation, which provides more isotropic mechanical properties. Accordingly, this laminate shows similar shear modulus and maximum shear strength in different shear test orientations
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. H-S. Lee, J-H. Yoon, C.H. Park, Y.G. Ko, D.H. Shin and C.S. Lee: J. Mater. Process. Technol., 2007, vol. 187-188, pp. 526-29.10.1016/j.jmatprotec.2006.11.215 ↗
2. J. Schneider, L. Dong, J.Y. Howe, and H.M. Meyer: Metall. Mater. Trans A, 2011, vol. 42A, pp. 3527-33.10.1007/s11661-011-0765-1 ↗
3. C.M. Cepeda-Jiménez, M. Pozuelo, J.M. García-Infanta, O.A. Ruano and F. Carreño: Metall. Mater. Trans. A, 2009, vol. 40, pp. 69-79.10.1007/s11661-008-9679-y ↗
4. A.A. Ganeeva, A.A. Kruglov and R.Ya. Lutfullin: Rev. Adv. Mater. Sci., 2010, vol. 25, pp. 136-41.
5. J. Zhang and J.J. Lewandowski: J. Mater. Sci., 1994, vol. 29, pp. 4022-26.10.1007/BF00355964 ↗
6. S. Nambu, M. Michiuchi, J. Inoue and T. Koseki: Compos. Sci. Technol., 2009, vol. 69, pp. 1936-41.10.1016/j.compscitech.2009.04.013 ↗
7. C.M. Cepeda-Jiménez, P. Hidalgo, M. Pozuelo, O.A. Ruano and F. Carreño: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2579-87.10.1016/j.msea.2009.12.019 ↗
8. A.G. Evans and J.W. Hutchinson: Acta Metall. Mater., 1995, vol. 43, 2507-30.10.1016/0956-7151(94)00444-M ↗
9. C.M. Cepeda-Jiménez, F. Carreño, O.A. Ruano, A.A. Sarkeeva, A.A. Kruglov and R.Ya. Lutfullin: Mater. Sci. Eng. A, 2013, vol. 563, pp. 28-35.10.1016/j.msea.2012.11.052 ↗
10. B.K. Kad, S.E. Schoenfeld and M.S. Burkins: Mater. Sci. Eng. A, 2002, vol. 322, pp. 241-51.10.1016/S0921-5093(01)01135-2 ↗
11. T. Vilaro, C. Colin, and J.D. Bartout: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3190-99.10.1007/s11661-011-0731-y ↗
12. W.G. Burgers: Physica, 1934, vol. 1, pp. 561-86.10.1016/S0031-8914(34)80244-3 ↗
13. H.-R. Wenk, I. Lonardelli and D. Willians: Acta Mater., 2004, vol. 52, pp. 1899-907.10.1016/j.actamat.2003.12.029 ↗
14. D. Bhattacharyya, G.B. Viswanathan, S.C. Vogel, D.J. Williams, V. Venkatesh and H.L. Fraser: Scripta Mater., 2006, vol. 54, pp. 231-36.10.1016/j.scriptamat.2005.09.026 ↗
15. I. Lonardelli, N. Gey, H.-R. Wenk, M. Humbert, S.C. Vogel and L. Lutterotti: Acta Mater., 2007, vol. 55, pp. 5718-27.10.1016/j.actamat.2007.06.017 ↗
16. G.A. Sargent, K.T. Kinsel, A.L. Pilchak, A.A. Salem, and S.L. Semiatin: Metall. Mater. Trans. A, 2012, vol. 43, pp. 3570-85.10.1007/s11661-012-1245-y ↗
17. G.E. Dieter: Mechanical Metallurgy, SI Metric, UK, 1988, pp.12-15.
18. S. Malinov, W. Sha, Z. Guo, C.C. Tang and A.E. Long: Mater. Charact., 2002, vol. 48, pp. 279-95.10.1016/S1044-5803(02)00286-3 ↗
19. R. Pederson, O. Babushkin, F. Skystedt and R. Warren: Mater. Sci. Technol., 2003, vol. 10, pp. 1533-38.10.1179/026708303225008013 ↗
20. G. Lutjering and J.C.Williams: Titanium. Springer, Berlin, 2nd edition, 2003.10.1007/978-3-540-71398-2 ↗
21. J. Romero, M. Preuss and J. Quita da Fonseca: Scripta Mater., 2009, vol. 61, pp. 399–402.10.1016/j.scriptamat.2009.04.031 ↗
22. C. Leyens and M. Peters: Titanium and Titanium Alloys. Wiley-VCH, Weinheim, Germany, 2003, pp.8.10.1002/3527602119 ↗
23. M.L. Meier, D.R. Lesuer and A.K. Mukherjee: Mater. Sci. Eng. A, 1991, vol. 136, pp. 71-8.10.1016/0921-5093(91)90442-P ↗
24. M. Karadge, M. Preuss, C. Lovell, P.J. Withers and S. Bray: Mater. Sci. Eng. A, 2007, vol. 459, pp. 182-92.10.1016/j.msea.2006.12.095 ↗
25. A.A. Salem, M.G. Glavicic and S.L. Semiatin: Mater. Sci. Eng. A, 2008, vol. 496, pp. 169-76.10.1016/j.msea.2008.05.017 ↗
26. N. Gey, M. Humbert and H. Moustahfid: Scripta Mater., 2000, vol. 42, pp. 525-30.10.1016/S1359-6462(99)00396-6 ↗
27. O.A. Kaibyshev, R.Ya. Lutfullin and V.K. Berdin: Acta Metall. Mater., 1994, vol. 42, pp. 2609-15.10.1016/0956-7151(94)90202-X ↗
28. W.J. Evans, J.P. Jones and M.T. Whittaker: Int. J. Fatigue, 2005, vol. 27, pp. 1244-50.10.1016/j.ijfatigue.2005.06.045 ↗
29. J. Gong and A.J. Wilkinson: Acta Mater., 2009, vol. 57, pp. 5693-705.10.1016/j.actamat.2009.07.064 ↗
30. I. Bantounas, D. Dye and T.C. Lindley: Acta Mater., 2010, vol. 58, pp. 3908-18.10.1016/j.actamat.2010.03.036 ↗