Finite-element calculations of the lattice rotation field of a tensile-loaded nickel-based alloy multicrystal and comparison with topographical X-ray diffraction measurements
Source abstract
Abstract
A new experimental measurement technique using synchrotron radiation is applied to determine the curvature of the crystallographic lattice within a grain of a multicrystalline specimen after uniaxial tensile loading. The experimental results are compared to a three-dimensional finite-element model, which is based on a classical crystal-plasticity law. The model takes the entire microstructure of the multicrystal into account. A small-strain and small-rotation formalism allows calculation of the orientation matrix at each integration point for each deformation step. A good agreement of the experimental and numerical data has been found. The experimental technique is based on image-data processing. The development of data-treatment algorithms allows distinction to be made between the regular crystallographic curvature and the random mosaic distribution always present in polycrystalline materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. M. Berveiller and A. Zaoui: J. Mech. Phys. Solids, 1979, vol. 6, p. 326.
2. L. Méric, P. Poubanne, and G. Cailletaud: J. Eng. Mater. Technol., 1991, vol. 113, pp. 162–70.10.1115/1.2903374 ↗
3. F. Eberl: Ph.D. Thesis, Ecole des Arts et Métiers de Paris, Paris, 1999.
4. A.-F. Gourgues, E. Andrieu, P. Pilvin, and P. Scott: in Corrosion-Deformation Interactions ’96, The Institute of Materials, London 1997, pp. 453–62.
5. F. Eberl, G. Cailletaud, and J.-L. Lebrun: Proc. Adv. in X-Ray Anal., 1998, vol. 42, pp. 116–21.
6. A.J. Schwartz: Electron Backscatter Diffraction in Materials Science, Kluwer Academic/Plenum Publishers, New York, NY, 2001.
7. F. Delaire, J.L. Raphanel, and C. Rey: Acta Mater., 2000, vol. 48, pp. 1075–87.10.1016/S1359-6454(99)00408-5 ↗
8. R. Parisot, S. Forest, A.-F. Gourgues, A. Pineau, and D. Mareuse: Computat. Mater. Sci., 2001, vol. 19, pp. 189–204.10.1016/S0927-0256(00)00155-5 ↗
9. S. Forest: Acta Mater., 1998, vol. 9, pp. 3265–81.10.1016/S1359-6454(98)00012-3 ↗
10. J. Mandel: Int. J. Solids Struct., 1973, vol. 9, pp. 725–40.10.1016/0020-7683(73)90120-0 ↗
11. R.J. Asaro: J. Appl. Mech., 1983, vol. 50, pp. 921–34.10.1115/1.3167205 ↗
12. A. Needleman, R.J. Asaro Asaro, J. Lemonds, and D. Peirce: Comp. Meth. Appl. Mech. Eng., 1985, vol. 52, pp. 689–708.10.1016/0045-7825(85)90014-3 ↗
13. C. Teodosiu, J.L. Raphanel, and L. Tabourot: in Large Plastic Deformations, MECAMAT ’91, C. Teodosiu and F. Sideroff, eds., Balkema, Rotterdam, The Netherlands, 1993.
14. S. Forest and P. Pilvin: Z. Angew. Math. Mech., 1999, vol. 79, pp. 199–202.10.1002/zamm.19990791352 ↗
15. J. Mandel: J. Méc. Théor. Appl.—1, 1982, vol. 1, pp. 7–23.
16. L. Méric, G. Cailletaud, and M. Gaspérini: Acta Metall., 1994, vol. 42, pp. 921–35.10.1016/0956-7151(94)90287-9 ↗
17. F. Eberl, F. Feyel, S. Quilici, and G. Cailletaud: J. Phys. IV France, 1998, vol. 8, pp. 15–25.10.1051/jp4:1998402 ↗
18. T. Wroblewski, D. Breuer, H.A. Crostack, F. Fandrich, M. Gross, and P. Klimanek: in European Powder Diffraction Proc. EPDIC5, Trans Tech Publications, Aedermannsdorf, Switzerland, 1998, pp. 216–20.