Linear Contraction Behavior of Low-Carbon, Low-Alloy Steels During and After Solidification Using Real-Time Measurements
Source abstract
Abstract
A technique for measuring the linear contraction during and after solidification of low-alloy steel was developed and used for examination of two commercial low-carbon and low-alloy steel grades. The effects of several experimental parameters on the contraction were studied. The solidification contraction behavior was described using the concept of rigidity in a solidifying alloy, evolution of the solid fraction, and the microstructure development during solidification. A correlation between the linear contraction properties in the solidification range and the hot crack susceptibility was proposed and used for the estimation of hot cracking susceptibility for two studied alloys and verified with the real casting practice. The technique allows estimation of the contraction coefficient of commercial steels in a wide range of temperatures and could be helpful for computer simulation and process optimization during continuous casting.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. [1] A. Grill, K. Sorimachi, J.K. Brimacombe: Metall. Trans. B, 1976, vol. 7B, pp. 177-189.10.1007/BF02654916 ↗
2. [2] J.K. Brimacombe, K. Sorimachi: Metall. Trans. B, 1977, vol. 8B, pp. 489-505.10.1007/BF02696937 ↗
3. [3] B.G. Thomas: Metall. Mat. Trans. B, 2002, vol. 33B, pp. 795-812.10.1007/s11663-002-0063-9 ↗
4. [4] J. Campbell: Castings, 2nd ed., Butterworth-Heinemann, Oxford, UK, 2003, pp. 242-250.
5. [5] J.A. Dantzig, M. Rappaz, Solidification, EPFL Press, Lausanne, 2009, pp. 358-360.10.1201/9781439808030 ↗
6. D. Eskine, J. Zuidema Jr, L. Katgerman: Int. J. Cast Met. Res., 2002, vol. 14, pp. 217–24.10.1080/13640461.2002.11819440 ↗
7. D.G. Eskin, Suyitno, J.F. Mooney, and L. Katgerman: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1325–35.10.1007/s11661-004-0307-1 ↗
8. I.I. Novikov: Goryachelomkost tsvetnykh metallov i splavov (Hot Shortness of Nonferrous Metals and Alloys), Nauka, Moscow, 1966.
9. T. Emi: in The Making, Shaping and Treating of Steel: Casting Volume, A.W. Cramb, ed., AISE Steel Foundation, Pittsburg, PA, 2003.
10. W. Kurz: La Metallurgia Italiana, 2008, vol. 99, pp. 56–64.
11. T. Emi: Mechanical Properties of Steel near Solidus Temperatures, Handbook of Iron and Steel, ISIJ, Tokyo, Japan, 1979, pp. 217-224.
12. M. Rappaz, A. Jacot, W.J. Boettinger: Metall. Mat. Trans. A, 2003, vol. 34A, pp. 467-479.10.1007/s11661-003-0083-3 ↗
13. K.Y. Kim: ISIJ Int., 2003, vol. 43, pp. 647-652.10.2355/isijinternational.43.647 ↗
14. Y.S. Touloukian, R.W. Powell, C.Y. Ho, P.G. Klemens: Thermal expansion, Plenum, New York, 1970, pp. 157-160.
15. P. Wray: Metall. Trans. B, 1976, vol. 7B, pp. 639-646.10.1007/BF02698597 ↗
16. A. Jablonka, K. Harste, K. Schwerdtfeger: Steel Res., 1991, vol. 62, pp. 24-33.10.1002/srin.199101722 ↗
17. E. Schmidtmann, L. Pleugel: Arch. Eisenhuttenwes., 1980, vol. 51, pp. 49-61.
18. P. Ackermann, W. Kurz, W. Heinemann: Mat. Sci. Eng., 1985, vol. 75, pp. 79-86.10.1016/0025-5416(85)90179-X ↗
19. C. Bernhard, G. Xia: Ironmak. Steelmak., 2006, vol. 33, pp. 52-56.10.1179/174328106X94717 ↗
20. Y. Meng, C. Li, J. Parkman, and B.G. Thomas: in Solidification Process and Microstructure, M. Rappaz, ed., TMS, Charlotte, 2004, pp. 33–39.
21. [21] I.I. Novikov, G.A. Korol’kov, A.N. Yakubovich: Russ. Castings Prod., 1971, vol. 8, pp. 333-334.
22. [22] M. M’Hamdi, A. Pilipenko, D. Eskin: AFS Trans., 2003, vol. 113, pp. 333-340.
23. ThemoCalc, http://www.thermocalc.se.
24. L. Zhang, D.G. Eskin, M. Lalpoor, L. Katgerman: Mat. Sci. Eng. A, 2010, vol. 527, pp. 3264-3270.10.1016/j.msea.2010.02.005 ↗
25. Suyitno, D.G. Eskin, and L. Katgerman: 9th Int. Conf. Alum. Alloys (ICAA9), Institute of Materials Engineering, Melbourne, Australia, 2004, pp. 1309–15.
26. G. Shin, T. Kajitani, T. Suzuki, T. Umeda: Tetsu-to-Hagane, 1992, vol. 78, pp. 587-593.10.2355/tetsutohagane1955.78.4_587 ↗
27. B. Böttger, M. Apel, B. Santillana, and D.G. Eskin: IOP Conf. Ser.: Mater. Sci. Eng., 2012, vol. 33, p. 012107, DOI:10.1088/1757-899X/33/1/012107.10.1088/1757-899X/33/1/012107 ↗
28. H. Mehrara, B. Santillana, D.G. Eskin, R. Boom, L. Katgerman, and G. Abbel: IOP Conf. Ser.: Mater. Sci. Eng., 2012, vol. 27, p. 012046, DOI:10.1088/1757-899X/27/1/012046.10.1088/1757-899X/27/1/012046 ↗
29. B. Santillana, D.G. Eskin, R. Boom, and L. Katgerman: IOP Conf. Ser.: Mater. Sci. Eng., 2012, vol. 27, p. 012059, DOI:10.1088/1757-899X/27/1/012059.10.1088/1757-899X/27/1/012059 ↗
30. [30] H. Mizukami, A. Yamanaka, T. Watanabe: ISIJ Int., 1999, vol. 85, pp. 592-598.
31. [31] T.W. Clyne, M. Wolf, W. Kurz: Metall. Trans. B, 1982, vol. 13B, pp. 259-266.10.1007/BF02664583 ↗
32. P. Presoly, R. Pierer, and C. Bernhard: IOP Conf. Ser.: Mater. Sci. Eng., 2012, vol. 33, p. 012064, DOI:10.1088/1757-899X/33/1/012064.10.1088/1757-899X/33/1/012064 ↗
33. [33] F. Cverna: Thermal properties of metals, ASM Int., OH, US, 2002, pp. 9-10.