Three-Dimensional Atom Probe Investigation of Microstructural Evolution during Tempering of an Ultra-High-Strength High-Toughness Steel
Source abstract
Abstract
The evaluation of the tempering response of an ultra-high-strength, high-toughness (UHSHT) steel revealed that samples austenitized at 900 °C and tempered for 4 and 8 hours at 485 °C had similar yield strengths but a ∼50 pct increase in fracture toughness for the 8-hour temper. The results of our investigations of microstructural origins of this difference, using the nanometric scale resolution of the three-dimensional atom probe (3DAP) suggest that nanoscale strengthening precipitates, essentially carbides and intermetallic clusters (containing primarily Cr and Mo atoms), are present in both samples. The chemical compositions of the particles in the two samples were found to be similar, but clear evidence of differences in physical attributes of the precipitates, such as particle size, morphology, and interparticle spacing, are seen.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. M.K. Miller, P. Periege, M.G. Burke: Mater. Characterization, 2000, vol. 44, pp. 235–5410.1016/S1044-5803(99)00056-X ↗
2. E.V. Pereloma, A. Shekhter, M.K. Miller, S.P. Ringer: Acta Mater., 2004, vol. 52, pp. 5589–560210.1016/j.actamat.2004.08.018 ↗
3. R.C. Thomson: Mater. Characterization, 2000, vol. 44, pp. 219–3310.1016/S1044-5803(99)00061-3 ↗
4. K. Seto, D.J. Larson, P.J. Warren, G.D.W. Smith: Scripta Mater., 1999, vol. 40(9), pp. 1029–3410.1016/S1359-6462(98)00485-0 ↗
5. M. Hattestrand, J.-O. Nilsson, K. Stiller, P. Liu, M. Anderson: Acta Mater., 2004, vol. 52, pp. 1023–3710.1016/j.actamat.2003.10.048 ↗
6. K. Hono: Progr. Mater. Sci., 2002, vol. 47, pp. 621–72910.1016/S0079-6425(01)00007-X ↗
7. D. Blavette, E. Cadel, B. Deconihout: Mater. Characterization, 2000, vol. 44, pp. 133–5710.1016/S1044-5803(99)00050-9 ↗
8. L.E. Iorio, J.L. Maloney, W.M. Garrison Jr.: 40th Mechanical Working and Steel Processing Conf. Proc. vol. XXXVI, ISS-AIME, Warrendale, PA, 1999, pp. 901–20
9. J.M. Dahl, P.M. Novotny: Adv. Mater. Processes, 1999, vol. 155(3), pp. 23–25
10. R. Balamuralikrishnan: Ph.D. Thesis, Carnegie Mellon University, Pittsburgh, PA, 1998
11. W.M. Garrison Jr., M.A. Rhoads: Trans. Ind. Inst. Met., 1996, vol. 49(3), pp. 151–62
12. M. Srinivas, R. Balamuralikrishnan, R. Veerababu, and K. Muraleedharan: Defence Metallurgical Research Laboratory, Hyderabad, India, unpublished research, 2007
13. A.J. Allen, D. Gavillet, J.R. Weertman: Acta Metall. Mater., 1993, vol. 41(6), pp. 1869–8410.1016/0956-7151(93)90207-9 ↗
14. G.A. Clarke, W.R. Andrews, J.A. Begley, J.K. Donald, G.T. Embley, J.D. Landes, D.E. McCabe, J.H Underwood: ASTM J. Test. Eval., 1979, vol. 7, p. 4910.1520/JTE11201J ↗
15. M.K. Miller, G.D.W. Smith: Atom Probe Microanalysis: Principles and Applications to Materials Problems, Materials Research Society, Pittsburgh, PA, 1989, pp. 43–50
16. D. Vaumousse, A. Cerezo, P.J. Warren: Ultramicroscopy, 2003, vol. 95, pp. 215–2110.1016/S0304-3991(02)00319-4 ↗
17. D. Isheim, R. Prakash Kolli, M.E. Fine, D.N. Seidman: Scripta Mater., 2006, vol. 55, pp. 35–4010.1016/j.scriptamat.2006.02.040 ↗
18. E.V. Pereloma, I.B. Timokhina, K.F. Russell, M.K. Miller: Scripta Mater., 2006, vol. 54, pp. 471–7610.1016/j.scriptamat.2005.10.008 ↗
19. M.K. Miller, K.F. Russell, D.T. Hoelzer: J. Nucl. Mater., 2006, vol. 351(1–3), pp. 261–6810.1016/j.jnucmat.2006.02.004 ↗
20. I.B. Timikhina, P.D. Hodgson, S.P. Ringer, R.K. Zheng, E.V. Pereloma: Scripta Mater., 2007, vol. 56, pp. 601–0410.1016/j.scriptamat.2006.12.018 ↗
21. M.K. Miller, K.F. Russell, M.A. Sokolov, R.K. Nanstad: J. Nucl. Mater., 2003, vol. 320, pp. 177–8310.1016/S0022-3115(03)00108-9 ↗
22. M.K. Miller, K.F. Russell, M.A. Sokolov, R.K. Nanstad: Phil. Mag., 2005, vol. 85(4–7), pp. 401–0810.1080/0267837041233132060 ↗
23. M.K. Miller, R.K. Nanstad, M.A. Sokolov, K.F. Russell: J. Nucl. Mater., 2006, vol. 351, pp. 216–2210.1016/j.jnucmat.2006.02.010 ↗
24. G. Sha, A. Cerezo: Acta Mater., 2004, vol. 52, pp. 4503–1610.1016/j.actamat.2004.06.025 ↗
25. M.K. Miller, K.F. Russell, M.A. Sokolov, R.K. Nanstad: J. Nucl. Mater., 2007, vol. 361, pp. 248–6110.1016/j.jnucmat.2006.12.015 ↗
26. M.K. Miller, M.A. Sokolov, R.K. Nanstad, K.F. Russell: J. Nucl. Mater., 2006, vol. 351, pp. 187–9610.1016/j.jnucmat.2006.02.013 ↗
27. R. Ayer, P.M. Machmeier: Metall. Trans. A, 1993, vol. 24A, pp. 1943–5510.1007/BF02666329 ↗
28. M.K. Miller: Atom Probe Tomography: Analysis at the Atomic Level, Kluwer Academic/Plenum, New York, NY, 200010.1007/978-1-4615-4281-0 ↗
29. M.K. Miller and K.F. Russel: J. Nucl. Mater., 2007, doi: 10.1016/j.jnucmat.2007.05.00310.1016/j.jnucmat.2007.05.003 ↗
30. G.M. Carinci, G.B. Olson, J.A. Liddle, L. Chang, and G.D.W. Smith: 34th Sagamore Army Materials Research Conf. Proc., G.B. Olson et al., eds., U.S. Government Printing Office, Washington, DC, 1990, pp. 179–208.
31. J.S. Montgomery and G.B. Olson: Proc. G.R. Speich Symp., G. Krauss and P.E. Repas, eds., ISS, Warrendale, PA, 1992, pp. 177–214