journal article·2014-11

Deformation Mapping and the Role of Carbides on the Microstructure and Properties of Evolved Adiabatic Shear Bands

Solomon Boakye-Yiadom, Abdul Khaliq Khan, Nabil Bassim

Publisher page

Abstract

Impacting hardenable steel such as 4340, results in the formation of adiabatic shear bands (ASBs). Previous studies have shown that the presence of carbides/second-phase particles in the pre-deformation microstructures of 4340 steel increases their susceptibility to the formation of ASBs. The current study examines the role of carbides on the microstructure and properties within evolved ASBs in 4340 steel after impact. Geometric phase analysis was used to map local deformation fields within the evolved ASBs. It was observed that carbide fragmentation due to plastic deformation of carbides produces both residual carbides and residual carbide particles in regions away from the shear bands. Extensive carbide fragmentation produces fine residual carbide particles which are redistributed within the ASBs. This is attributed to strain localization within the ASBs which result in higher local strain and strain rates within the shear bands than in regions outside the bands. In addition, it is observed that the residual carbide particles trap and pin dislocations within the shear bands and contribute to an increase in local hardening. A more homogenous distribution of narrower and shorter rotational and shear-strain fields were revealed by the local deformation maps within the evolved ASBs. Lattice deformation mapping revealed that the ferrite matrix, prior to impact, had broader and longer rotational and shear-strain fields perpendicular to the direction of impact. This is attributed to lattice-invariant deformation and shape deformation processes that occur on specific crystallographic planes during martensitic transformation. It is concluded that strain localization during high strain rate deformations does not occur on specific crystallographic planes. This results in a more regular distribution of internal lattice rotational and strain fields within the evolved ASBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. B. Dodd and Y. Bai: Adiabatic Shear Localization: Frontiers and Advances, Elsevier, Amsterdam, 2012.
2. C.M. Glass, G.M. Moss, and S.K. Golaski: in Response of Metals to High Velocity Deformation, P. Shewmon and V.F. Zackay, eds., Aime, New York, NY, 1961.
3. S. Boakye-Yiadom and M.N. Bassim: Mat. Sci. Eng. A, 2011, vol. 528, pp. 8700–08.10.1016/j.msea.2011.08.036 ↗
4. S. Boakye-Yiadom and M.N. Bassim: Mater. Sci. Eng. A, 2012, vol. 546, pp. 223–32.10.1016/j.msea.2012.03.057 ↗
5. L.E. Murr, E.A. Trillo, S. Pappu, and C. Kennedy: J. Mater. Sci., 2002, vol. 37, pp. 3337–60.10.1023/A:1016541023502 ↗
6. N. Bassim: 13th International Conference On Mesomechanics, 2011, pp. 1–3.
7. S. Boakye-Yiadom: Msc. Thesis, University of Manitoba, 2010.
8. G.T. Gray, III, E. Cerreta, N.K. Bourne, R. Olson, and P. Rigg: Material Response Under Extreme Loading Conditions, Materials Science And Technology Division, Los Alamos National Laboratory, Los Alamos, NM 87545, LA-UR-12-00684, 2012.
9. S. Boakye-Yiadom, N. Bassim, and A.K. Khan: Philos. Mag., 2013, vol. 93, pp. 4544–68.10.1080/14786435.2013.837587 ↗
10. M.N. Bassim and S. Boakye-Yiadom: in 10th International DYMAT Conference, EPJ Web of Conferences, 2012, pp. 1–4.
11. S. Boakye-Yiadom, A.K. Khan, and N. Bassim: Mater. Sci. Eng. A, 2014, vol. 605, pp. 270–85.10.1016/j.msea.2014.03.066 ↗
12. S. Boakye-Yiadom, A.K. Khan, and N. Bassim: Mater. Sci. Eng. A, 2014, DOI:10.1016/j.msea.2014.07.095.10.1016/j.msea.2014.07.095 ↗
13. L.H. Dai, L.F. Liu, and Y.L. Bai: Mater. Lett., 2004, vol. 58, pp. 1773–76.10.1016/j.matlet.2003.10.050 ↗
14. L.F. Liu, L.H. Dai, and G.W. Yang: Mater. Sci. Eng. A, 2003, vol. 345, pp. 190–96.10.1016/S0921-5093(02)00459-8 ↗
15. D. Rittel, G. Ravichandran, and A. Venkert: Mater. Sci. Eng. A, 2006, vol. 432, pp. 191–201.10.1016/j.msea.2006.05.154 ↗
16. D. Rittel: J. Phys. D Appl. Phys., 2009, vol. 42, pp. 1–6.10.1088/0022-3727/42/21/214009 ↗
17. J. Chung and L. Rabenberg: Ultramicroscopy, 2008, vol. 108, pp. 1595–1602.10.1016/j.ultramic.2008.05.010 ↗
18. J.A. Hines, K.S. Vecchio, and S. Ahzi, Metall. Mater. Trans. A, 1998, vol. 29A, pp. 191–203.10.1007/s11661-998-0172-4 ↗
19. D. Rittel, A. Bhattacharyya, B. Poon, J. Zhao, and G. Ravichandran: Mater. Sci. Eng. A, 2007, vol. 447, pp. 65–70.10.1016/j.msea.2006.10.064 ↗
20. D. Rittel and Z. Wang: Mech. Mater., 2008, vol. 40, pp. 629–35.10.1016/j.mechmat.2008.03.002 ↗
21. Y. Xu, J. Zhang, Y. Bai, and M.A. Meyers: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 811–41.10.1007/s11661-007-9431-z ↗
22. G. Krauss: Steels, Processing, Structure and Performance, ASM International, Materials Park, OH, 2005.
23. M.A. Grossmann and E.C. Bain: Principles of Heat Treatment, 5th ed., American Society for Metals, Metals Park, OH, 1964.
24. J.W. Christian: The Theory of Transformations in Metals and Alloys, Elsevier Science Ltd, Pergamon, 2002.
25. M.J. Hÿtch: Scanning Microsc., vol. 11, 1997, pp. 53–66.
26. M.J. Hÿtch, E. Snoeck, and R. Kilaas: Ultramicroscopy, 1998, vol. 74, pp. 131–46.10.1016/S0304-3991(98)00035-7 ↗
27. M.J. Hÿtch and T. Plamann: Ultramicroscopy, 2001, vol. 87, pp. 199–212.10.1016/S0304-3991(00)00099-1 ↗
28. D.R.G. Mitchell: Microsc. Res. Tech., 2008, vol. 71, pp. 588–93.10.1002/jemt.20591 ↗
29. V. Grillo and F. Rossi: Ultramicroscopy, 2013, vol. 125, pp. 112–29.10.1016/j.ultramic.2012.10.009 ↗
30. V. Grillo and E. Rotunno: Ultramicroscopy, 2013, vol. 125, pp. 97–111.10.1016/j.ultramic.2012.10.016 ↗
31. Y. Ivanisenko, W. Lojkowski, R.Z. Valiev, and H.-J. Fecht: Acta Mater., 2003, vol. 51, pp. 5555–5570.10.1016/S1359-6454(03)00419-1 ↗
32. J. Chakraborty, M. Gosh, R. Ranjan, G. Das, D. Das, and S. Chandra: Philos. Mag., 2013, vol. 93, pp. 4598–4616.10.1080/14786435.2013.838010 ↗
33. V.N. Gridnev, V.G. Gavrilyuk, I.Y. Dekhtyar, Y.Y. Meshkov, P.S. Nizin, and V.G. Prokopenko: Phys. Status Solidi A, 1972, vol. 14, pp. 689–94.10.1002/pssa.2210140238 ↗
34. V.G. Gavrilyuk: Mater. Sci. Eng. A, 2003, vol. 345, pp. 81–89.10.1016/S0921-5093(02)00358-1 ↗
35. X. Sauvage, C. Opreauxf, F. Danoix, and D. Blavette: Philos. Mag., 2000, vol. 80, pp. 781–96.10.1080/01418610008212082 ↗
36. J.H. Beatty, L.W. Meyers, M.A. Meyers, and S. Nemat-Nasser: Formation of Controlled Adiabatic Shear Bands in AISI 4340 High Strength Steel, Us Army Materials Technical Laboratory Report, Mtl Tr, 1991, pp. 54–90.
37. C.L. Wittman, M.A. Meyers, and H.-R. Pak: Metall. Trans. A, 1990, vol. 21A, pp. 707–16.10.1007/BF02671941 ↗