Fatigue of LIGA Ni Micro-Electro-Mechanical System Thin Films
Source abstract
Abstract
This article presents the results of an experimental study of the mechanisms of fatigue in 270-μm-thick LIGA (lithographic, galvanoformung, abformung) Ni micro-electro-mechanical systems (MEMS) thin films with columnar microstructure. Stress-life behavior is compared with the previously reported data for LIGA Ni MEMS films and bulk Ni. The LIGA Ni thin films are shown to have comparable fatigue lives to bulk annealed Ni. The underlying mechanisms of fatigue crack growth are elucidated via scanning electron and focused ion beam (FIB) microscopy. Stress-driven recrystallization was revealed near the fatigue crack-tip using FIB microscopy. Microvoids were also found to form and coalesce in the recrystallized grains. This led to subsequent fatigue crack growth at the microscopic and macroscopic scales. The crack profiles revealed that fatigue crack growth was retarded by crack deflection and branching. The implications of the results are then discussed for the analyses of fatigue in nickel MEMS structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced MEMS and NEMS Technologies · Metal and Thin Film Mechanics · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. T.E. Buchheit, T.R. Christenson, D.T. Schmale, D.A. LaVan: Mater. Res. Soc. Symp. Proc., 1999, vol. 546, pp. 121–2610.1557/PROC-546-121 ↗
2. T.E. Buchheit, D.A. Van La, J.R. Michael, T.R. Christenson, S.D. Leith: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 539–5410.1007/s11661-002-0116-3 ↗
3. H.S. Cho, W.G. Babcock, H. Last, K.J. Hemker: Mater. Res. Soc. Symp. Proc., 2001, vol. 657, pp. EE5231–EE5236
4. H.S. Cho, K.J. Hemker, K. Lian, and J. Goettert: MEMS 2002 IEEE Int. Conf., 15th IEEE Int. Conf. on Micro Electro Mechanical Systems, IEEE, Piscataway, NJ, 2002, pp. 439–42
5. H.S. Cho, K.J. Hemker, K. Lian, J. Goettert, G. Dirras: Sens. Actuat. A: Phys., 2003, vol. 103 (1–2), pp. 59–6310.1016/S0924-4247(02)00314-X ↗
6. T.R. Christenson, T.E. Buchheit, D.T. Schmale, R.J. Bourcier: Mater. Res. Soc. Symp. Proc., 1998, vol. 518, pp. 185–9010.1557/PROC-518-185 ↗
7. J.C. Fox, R.L. Edwards, W.N. Sharpe Jr.: Exp. Techniq., 1999, vol. 23 (3), pp. 28–3010.1111/j.1747-1567.1999.tb01567.x ↗
8. K.J. Hemker, H.S. Cho, Y. Desta, K. Lian, L.K. Jian, J. Goettert: HARMST-2001, Baden-Baden, Germany, 2001
9. K.J. Hemker, H. Last: Mater. Sci. Eng. A, 2001, vols. 319–321, pp. 882–8610.1016/S0921-5093(01)00956-X ↗
10. H. Jin, E.C. Harvey, J.P. Hayes, M.K. Ghantasala, A. Dowling, M. Solomon, S.T. Davies: Proc. SPIE: Int. Soc. Opt. Eng., 2001, vol. 4592, pp. 166–7110.1117/12.448962 ↗
11. H. Last, K.J. Hemker, R. Witt: Mater. Res. Soc. Symp. Proc., 2000, vol. 605, pp. 191–9710.1557/PROC-605-191 ↗
12. J. Lou, P. Shrotriya, S. Allameh, N. Yao, T. Buchheit, W.O. Soboyejo: Mater. Res. Symp. Proc., 2001, vol. 687, pp. 41–46
13. H. Majjad, S. Basrour, P. Delobelle, M. Schmidt: Sens. Actuat. A: Phys., 1999, vol. 74 (1–3), pp. 148–5110.1016/S0924-4247(98)00306-9 ↗
14. C.K. Malek, L. Thomas: Proc. SPIE, 2000, vol. 4019, pp. 484–9110.1117/12.382315 ↗
15. E. Mazza, S. Abel, J. Dual: Microsyst. Technol., 1996, vol. 2, pp. 197–20210.1007/s005420050044 ↗
16. J. Mohr, M. Strohrmann: J. Micromech. Microeng., 1992, vol. 2, pp. 193–9510.1088/0960-1317/2/3/018 ↗
17. F. Munnik, F. Benninger, S. Mikhailov, A. Bertsch, P. Renaud, H. Lorenz, M. Gmur: Microelectr. Eng., 2003, vols. 67–67, pp. 96–10310.1016/S0167-9317(03)00064-9 ↗
18. J. Lou, S. Allameh, T. Buccheit, W.O. Soboyejo: J. Mater. Sci., 2003, vol. 38, pp. 4129–3510.1023/A:1026373421124 ↗
19. W.N. Sharpe Jr., A. McAleavey: Proc. SPIE Int. Soc. Opt. Eng., 1998, vol. 3512, pp. 130–37
20. W.N. Sharpe Jr., D.A. LaVan, R.L. Edwards: Proc. Int. Conf. Solid-State Sens. Actuat., 1997, vol. 1, pp. 607–1010.1109/SENSOR.1997.613724 ↗
21. P. Shrotriya, S.M. Allameh, J. Lou, T.E. Buchheit, W.O. Soboyejo: Mech. Mater., 2003, vol. 35, pp. 223–4310.1016/S0167-6636(02)00273-9 ↗
22. D. Sparks, D. Slaughter, R. Beni, L. Jordan, M. Chia, D. Rich, J. Johnson, T. Vas: Sens. Mater., 1999, vol. 11, pp. 197–207
23. D.R. Sparks, S.C. Chang: Proc. SPIE Int. Soc. Opt. Eng., 1997, vol. 3223, pp. 218–22
24. L.S. Stephens, K.W. Kelly, S. Simhadri, A.B. McCandless, E.I. Meletis: J. Microelectromech. Syst., 2001, vol. 10, pp. 347–5910.1109/84.946780 ↗
25. M. Strobel, U. Schmidt, K. Bade, and J. Halbritter: in Electrochemical Nanotechnology. In-Situ Local Probe Techniques at Electrochemical Interfaces, W.J.P. Lorenz, ed., Wiley-VCH, Weinheim, Germany, 1998, pp. 215–2410.1002/9783527612154.ch17 ↗
26. M. Strobel, U. Schmidt, K. Bade, J. Halbritter: Microsyst. Technol., 1996, vol. 3, pp. 10–1610.1007/s005420050047 ↗
27. Z.L. Xie, D. Pan, H. Last, K.J. Hemker: Mater. Res. Soc. Symp. Proc., 2000, vol. 605, pp. 197–20210.1557/PROC-605-197 ↗
28. M. Zupan, K.J. Hemker: Exper. Mech., 2002, vol. 42, pp. 214–2010.1007/BF02410872 ↗
29. M. Madou: Fundamentals of Microfabrication, 2nd ed., CRC Press, New York, NY, 2002.
30. Reliability, Testing, and Characterization of MEMS/MOEMS III, Proc. SPIE International Society of Optical Engineers, D.M. Tanner and R. Ramesham, eds., 2003, vol. 5343, pp. 235–43
31. S.M. Allameh, J. Lou, F. Kavishe, T.E. Buchheit, W.O. Soboyejo: Mater. Sci. Eng. A, 2004, vol. 371, pp. 256–6610.1016/j.msea.2003.12.020 ↗
32. D.R. Sparks, M.I. Chia, and S. Zarabadi: in Reliability of Resonant Micromachined Sensors and Actuators, SAE Inc., Warrendale, PA, 2001, pp. 1–1010.4271/2001-01-0618 ↗
33. D.R. Sparks, M.I. Chia, G.Q. Jiang: Sens. Actuat. Phys., 2001, vol. 95, pp. 61–6810.1016/S0924-4247(01)00716-6 ↗
34. B.L. Boyce, J.R. Michael, P.G. Kotula: Acta Mater., 2004, vol. 52, pp. 1609–1910.1016/j.actamat.2003.12.032 ↗
35. W.N. Sharpe, Jr., S. Brown, G.C. Johnson, and W. Knauss: in S. Brown, J. Gilbert, H. Guckel, R. Howe, G. Johnson, P. Krulevitch, and C. Muhlstein, eds., Round-robin Tests of Modulus and Strength of Polysilicon. Microelectromech. Struct. Mater. Res., MRS, San Francisco, CA, 1998, pp. 57–6510.1557/PROC-518-57 ↗
36. W.N. Sharpe Jr.: in Size Effects on Mechanical Properties of Polysilicon, ASME, Mater. Div. (Publ.), MD, 1998, vol. 84, pp. 153–5510.1115/IMECE1998-1153 ↗
37. C. Ioannis and W.G. Knauss: in C.R. Friedrich, and Y. Vladimirsky, eds., “Mechanical Properties of Thin Polysilicon Films by Means of Probe Microscopy. Materials and Device Characterization” in Micromachining. Proc. SPIE, 1998, vol. 3512, pp. 66–7510.1117/12.324072 ↗
38. R. Ballarini, R.L. Mullern, H. Kahn, and A.H. Heuer: Proc. Microelectromech. Struct. Mater. Res., MRS Spring Meeting, San Francisco, CA, 1998, vol. 518, pp. 137–4210.1557/PROC-518-137 ↗
39. S. Jarayaman, R.L. Edwards, K.J. Hemker: J. Mater. Res., 1999, vol. 14, pp. 688–9710.1557/JMR.1999.0094 ↗
40. K. Lian, J. Jiang, Z.G. Ling, E.I. Meletis: Proc. SPIE., 2003, vol. 4980, pp. 192–9910.1117/12.478193 ↗
41. W.N. Sharpe Jr, D.A. LaVan, and R.L. Edwards: Proc. Int. Solid State Sens. Actuators Conf., IEEE, New York, NY, USA, 1997, vol. 601, pp. 607–10
42. W.O. Soboyejo: Mechanical Properties of Engineered Materials, Marcel Dekker, New York, 2003
43. K. Bhalerao, A.B. Soboyejo, W.O. Soboyejo: J. Mater. Sci., 2003, vol. 38, pp. 4157–6210.1023/A:1026329606103 ↗
44. R. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 4th ed., John Wiley, 1996
45. M. Ciappa, W. Fichtner: Proc. IEEE Int. Reliability Phys. Symp., 2000, vol. 38, pp. 210–16
46. S.D. Antolovich and A. Saxena: in ASM Handbook, 5th ed., ASM International, 1995, pp. 104–05
47. S. Suresh: Fatigue of Materials, 2nd ed., Cambridge University Press, UK, 1999.
48. P. Shrotriya, S.M. Allameh, W.O. Soboyejo: Mech. Mater., 2004, vol. 36, pp. 35–4410.1016/S0167-6636(03)00029-2 ↗
49. C.L. Muhlstein, R.T. Ritchie: Mech. Mater., 2004, vol. 36, pp. 13–3310.1016/S0167-6636(03)00028-0 ↗
50. D. Roylance: Mechanics of Materials, John Wiley & Sons, New York, NY, 1996