journal article·2012-12

Thermophysical Properties of Platinum-Copper Alloys

Shahid Mehmood, Ulrich E. Klotz, Gernot Pottlacher

Publisher page

Abstract

Platinum and copper along with their alloys have been used in a broad range of applications including jewelry, coinage, electrical and electronic devices, and many others. Their thermophysical properties play an important role in casting processes and are required as input data for casting simulation. The focus of this work was to investigate these properties by different methods. Platinum, copper, and four platinum-copper alloys, namely, Pt96Cu04, Pt68Cu32, Pt50Cu50, and Pt25Cu75, were investigated within this work. The melting range and thermal expansion were measured at fem by differential scanning calorimetry and dilatometry, respectively. At TU Graz, wire-shaped samples were investigated by an ohmic pulse heating technique. This technique delivers thermophysical properties of electrically conducting materials far into the liquid phase. These measurements allow the calculation of specific heat capacity and the temperature dependencies of electrical resistivity, enthalpy, and density of these alloys in the solid and liquid phases. Thermal conductivity and thermal diffusivity as a function of temperature are estimated from resistivity data using the Wiedemann–Franz law at the end of the solid phase and at the beginning of the liquid phase. The results are compared with the available literature values.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermodynamic and Structural Properties of Metals and Alloys · nanoparticles nucleation surface interactions · Material Dynamics and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. ASM Handbook, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM INTERNATIONAL, Materials Park, OH, 1991, vol. 2, p. 759
2. ASM Handbook on CD-ROM, ASM INTERNATIONAL and The Dialog Corporation, Ann Arbor, MI, 1999.
3. G. Pottlacher: High Temperature Thermophysical Properties of 22 Pure Metals, Keiper ed., Graz, Austria, 2010, pp. 82–87.
4. U.E. Klotz and T. Drago: Platinum Met. Rev., 2011, vol. 55 (1), pp. 20–27.10.1595/147106711X540373 ↗
5. M. Hansen: Constitution of Binary Alloys, 2nd ed., McGraw-Hill Book Co., New York, NY, 1958, p. 1262.
6. F. Doerinckel: Anorg. Chem., 1907, vol. 54, pp. 335–38.
7. T.B. Massalski: Binary Alloy Phase Diagrams, ASM, Metals Park, OH, 1986, vols. 1–2.
8. B. Wilthan, C. Cagran, C. Brunner, and G. Pottlacher: Thermochim. Acta, 2004, vol. 415, pp. 47–54.10.1016/j.tca.2003.06.003 ↗
9. C. Cagran, A. Seifter, and G. Pottlacher: Sci. Energy Technol., 2000, vol. 1, pp. 763–66.
10. T. Hüpf, C. Cagran, B. Wilthan, and G. Pottlacher: J. Phys.: Condens. Matter, 2009, vol. 21, pp. 125701–125707.10.1088/0953-8984/21/12/125701 ↗
11. G. Pottlacher and A. Seifter: Int. J. Thermophys., 2002, vol. 23 (5), pp. 1281–91.10.1023/A:1019804623248 ↗
12. C. Cagran and G. Pottlacher: Am. Inst. Phys., 2003, vol. 7, pp. 765–70.
13. C. Cagran and G. Pottlacher: J. Non-Cryst. Solids, 2007, vol. 353, pp. 3582–86.10.1016/j.jnoncrysol.2007.05.117 ↗
14. A. Schmon: Diploma Thesis, Technical University Graz, 2011, http://portal.tugraz.at/portal/page/portal/Files/i5110/files/Forschung/Thermophysik/DA-Schmon.pdf.
15. T. Hüpf and G. Pottlacher: High Temp.-High Press, 2011, vol. 40, pp. 271–79.
16. D.S. Gaal and P.S. Gaal: Proc. 30th Int. Thermal Conductivity Conf. and 18th Thermal Expansion Symp., DEStech Publications, Inc., Lancaster, PA, 2009, pp. 192–206.
17. K.C. Mills, B.J. Monaghan, and B.J. Keene: NPL Report CMMT(A), National Physics Laboratorium, Teddington, 1997, p. 53.
18. H. Suga, G. Pottlacher, and I. Egry: IUPAC Experimental Thermodynamics, Elsevier, Amsterdam, 2003, vol. 6, pp. 475–536.10.1016/S1874-5644(03)80013-9 ↗
19. C. Cagran and G. Pottlacher: Handbook of Thermal Analysis and Calorimetry, Elsevier, Amsterdam, 2008, vol. 5, pp. 299–342.10.1016/S1573-4374(08)80012-X ↗
20. THERMO-CALC Software AB, Stockholm, SGTE Nobel Metal Alloys Database (SNOB), Version 1.1.
21. G. Beck: Edelmetall-Taschenbuch, 2nd ed., Frankfurt und Hüthig GmbH, Heidelberg, 1995.
22. E.M. Savitskii: Handbook of Precious Metal, Hemisphere Publishing Corporation, New York, NY, 1989.
23. D.R. Lide: CRC Handbook of Chemistry and Physics, 88th ed., CRC Press, Boca Raton, FL, 2007, pp. 4–138.
24. J.W. Arblaster: Platinum Met. Rev., 1997, vol. 41, pp. 12–21.10.1595/003214097X4111221 ↗
25. G.R. Gathers, J.W. Shanner, and W.M. Hodgson: High Temp. - High Press, 1979, vol. 11, pp. 529–38.
26. R.S. Hixson and M.A. Winkler: Int. J. Thermophys., 1993, vol. 14, pp. 409–16.10.1007/BF00566040 ↗
27. G.K. White and M.L. Minges: Int. J. Thermophys., 1997, vol. 18, pp. 1269–1327.10.1007/BF02575261 ↗
28. A.K. Chaudhuri, D.W. Bonnel, L.A. Ford, and J.L. Margrave: High Temp. Sci., 1970, vol. 2, pp. 203–12.
29. Guide to the Expression of Uncertainty in Measurement, ISO, Geneva, 1993.
30. B. Wilthan: Ph.D. Thesis, Technical University Graz, Graz, 2005. http://portal.tugraz.at/portal/page/portal/TU_Graz/Einrichtungen/Institute/Homepages/i5110/forschung/thermophysik/dissertation