journal article·2014-03

Cr-Ge-Si Alloys for High-Temperature Structural Applications: Microstructural Evolution

Ali Soleimani-Dorcheh, Mathias C. Galetz

Publisher page

Abstract

The microstructural evolution of Cr-Si1−x-Gex (0 < x < 15 at. pct) alloys was studied (in annealed state). The quasi-isothermal section of the ternary diagram was assessed by quantitative EPMA analysis. Morphology, phase formation, chemical distribution, and indentation hardness of the alloys were investigated as a function of Ge/Si ratio. The microstructure of all studied alloys consisted of Crss solid solution and A15 Cr3X intermetallic phases. Substitution of Si by Ge strongly altered the microstructure by transforming the morphology from a lamellar eutectic Cr-Cr3Si system toward a peritectic one with dispersed Crss phase in A15 matrix. EPMA chemical distribution maps and X-ray diffraction results prove the mutual solubility of Si and Ge in A15 phase by forming Cr3(Si,Ge) as a complex A15 structure with Cr3(Si1−xGex) composition. Precipitates of the intermetallic phase within the Crss phase was observed in Ge-alloyed samples. Indentation hardness results showed that upon Si-Ge substitution the hardness of both phases was reduced. However, Si substitution by Ge had a stronger influence on the hardness of the solid solution phase than on the intermetallic phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. H. Bei, G. M. Pharr, E. P. George, Journal of Materials Science, 2004, vol. 39, p. 3975.10.1023/B:JMSC.0000031479.32138.84 ↗
2. D. M. Shah, D. L. Anton, Materials Science and Engineering: A, 1992, vol. 153, p. 402.10.1016/0921-5093(92)90228-S ↗
3. B.P. Bewlay, H.A. Lipsitt, M.R. Jackson, W.J. Reeder, and J.A. Sutliff, Mater. Sci. Eng. A, 1995, vol. 192–193, p. 534.10.1016/0921-5093(95)03299-1 ↗
4. S.V. Raj, Mater. Sci. Eng. A, 1995, vol. 192–193, p. 583.10.1016/0921-5093(94)03281-5 ↗
5. B. P. Bewlay, J. A. Sutliff, M. R. Jackson, K. M. Chang, Materials and Manufacturing Processes, 1994, vol. 9, p. 89.10.1080/10426919408934887 ↗
6. A. Gali, H. Bei, E. P. George, Acta Materialia, 2009, vol. 57, p. 3823.10.1016/j.actamat.2009.04.041 ↗
7. N. I. Medvedeva, Y. Gornostyrev, A. J. Freeman, Acta Materialia, 2002, vol. 50, p. 2471.10.1016/S1359-6454(02)00053-8 ↗
8. Y. Gu, Y. Ro, T. Kobayashi, H. Harada, Metallurgical and Materials Transactions A, 2005, vol. 36A, p. 577.10.1007/s11661-005-0172-6 ↗
9. Y. Gu, Y. Ro, H. Harada, Metallurgical and Materials Transactions A, 2004, vol. 35A, p. 3329.10.1007/s11661-006-0237-1 ↗
10. S. V. Raj, J. Daniel Whittenberger, B. Zeumer, G. Sauthoff, Intermetallics, 1999, vol. 7, p. 743.10.1016/S0966-9795(98)00095-8 ↗
11. S. V. Raj, Materials Science and Engineering: A, 1995, vol. 201, p. 229.10.1016/0921-5093(95)09767-8 ↗
12. Dogan.Ö.N., Oxidation of Metals, 2008, vol. 69, p. 233.10.1007/s11085-008-9095-0 ↗
13. A. Gali, H. Bei, and E.P. George: Advanced Intermetallic-Based Alloys, 980, 0980-II05-36, 2007.10.1557/PROC-980-0980-II05-36 ↗
14. B.V. Cockeram and R.A. Rapp, Mater. Sci. Eng. A, 1995, vol. 192–193, p. 980.10.1016/0921-5093(95)03342-4 ↗
15. D. Yi, C. Li, Z. Lai, O. Akselsen, J. Ulvensoen, Metallurgical and Materials Transactions A, 1998, vol. 29, p. 119.10.1007/s11661-998-0164-4 ↗
16. R. Sakidja, J. H. Perepezko, Journal of Nuclear Materials, 2007, vol. 366, p. 407.10.1016/j.jnucmat.2007.03.029 ↗
17. B. V. Cockeram, Surface and Coatings Technology, 1995, vol. 76–77, p. 20.10.1016/0257-8972(95)02492-1 ↗
18. N. Boutarek, R. Madar, Applied Surface Science, 1993, vol. 73, p. 209.10.1016/0169-4332(93)90168-B ↗
19. H. Okamoto, Journal of Phase Equilibria and Diffusion, 2001, vol. 22, p. 593.10.1007/s12385-001-0089-8 ↗
20. H. Okamoto, Journal of Phase Equilibria and Diffusion, 2010, vol. 31, p. 487.10.1007/s11669-010-9754-0 ↗
21. H. Bei, E. P. George, G. M. Pharr, Intermetallics, 2003, vol. 11, p. 283.10.1016/S0966-9795(02)00251-0 ↗
22. V. M. Chad, M. I. S. T. Faria, G. C. Coelho, C. A. Nunes, P. A. Suzuki, Materials Characterization, 2008, vol. 59, p. 74.10.1016/j.matchar.2006.10.020 ↗
23. H. Baker, ASM Handbook: vol. 3, Alloy Phase Diagrams, ASM International, Materials Park, OH, 1992.
24. H. Bei, E.P. George, and G.M. Pharr: MRS Proc., 753, BB25, 2003.10.1557/PROC-753-BB2.5 ↗
25. K. W. Li, S. M. Li, H. Zhong, Y. L. Xue, H. Z. Fu, Crystal Research and Technology, 2013, vol. 48, p. 430.10.1002/crat.201300030 ↗
26. L. A. Cornish, R. Suss, A. Watson, S. N. Prins, Platinum Metals Review, 2007, vol. 51, p. 104.10.1595/147106707X212967 ↗
27. Z. Li, P. Tsakiropoulos, Journal of Alloys and Compounds, 2013, vol. 550, p. 553.
28. H. Bei: Ph.D. Dissertation, University of Tennessee, 2003.
29. V. N. Bondarev, Powder Metallurgy and Metal Ceramics, 1966, vol. 5, p. 28.10.1007/BF00775864 ↗
30. J. A. Sago, J. W. Newkirk, Intermetallic Matrix Composites, 1990, vol. 194, p. 183.
31. A. Misra, J. J. Petrovic, T. E. Mitchell, Scripta Materialia, 1998, vol. 40, p. 191.10.1016/S1359-6462(98)00406-0 ↗