Impact fracture toughness of porous iron and high-strength steels
Source abstract
Abstract
The impact fracture toughness of sintered iron and high-strength sintered steels, with densities between 7.0 and 7.25 g/cm3, have been investigated by means of instrumented impact testing on fatigueprecracked as well as 0.17-mm-notched specimens. Experimental results show that the fracture behavior is controlled by the properties of the resisting necks at the crack/notch tip. The materials with impact yield strengths of up to 700 MPa display an increase in fracture toughness as the yield strength is increased. These materials undergo continuous yielding during loading, and ductile fracture takes place once the critical plastic strain is attained within a large process zone. A process-zone model, physically consistent with the fractographic observations, correctly rationalizes their impact fracture toughness. The materials with higher impact yield strengths display an impact curve which is linear up to fracture and are characterized by a fracture toughness which is independent of the yield strength. For these materials, the process zone reduces to the first necks at the crack/notch tip, and fracture takes place once the local applied stress-intensity factor reaches the fracture toughness of the matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · High-Velocity Impact and Material Behavior · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. R.M. German: Powder Metallurgy Science, 2nd ed., Metal Powder Industries Federation, Princeton, NJ, 1994.
2. B. Karlsson and I. Bertilsson: Scand. J. Metall., 1982, vol. 11, p. 11.
3. R.J. Bourcer, D.A. Koss, R.E. Smelser, and O. Richmond: Acta Metall., 1986, vol. 34, p. 2443.10.1016/0001-6160(86)90147-1 ↗
4. B. Cotterell, Shi-Qi He, and Yiu-Wing Mai: Acta Metall. Mater., 1994, vol. 42, p. 99.10.1016/0956-7151(94)90051-5 ↗
5. G. Straffelini and A. Molinari: J. Mater. Eng. Performance, 1996, vol. 5, p. 27.10.1007/BF02647265 ↗
6. G. Straffelini, V. Fontanari, and A. Molinari: Mater. Sci. Eng., 1998, vol. A248, p. 15310.1016/S0921-5093(98)00496-1 ↗
7. Metals Handbook, 9th ed., vol. 7, Powder Metallurgy, ASM International, Metals Park, OH, 1984, pp. 264–68.
8. R.A. Shimansky, J. Collins, and J.G. Orbison: Int. J. Powder Metall., 1992, vol. 28, p. 401.
9. D.C. Zenger, R. Ludwig, R. Zhang, and L. McCabe: Adv. Powder Metall. Particulate Mater., 1995, vol. 9, p. 3.
10. L.W. Crane and R.J. Farrow: Powder Metall., 1975, vol. 18, p. 36.
11. N.A. Fleck and R.A. Smith: Powder Metall., 1981, vol. 24, p. 121.10.1179/pom.1981.24.3.121 ↗
12. C.M. Sonsino: Z. Werkstofftech., 1984, vol. 15, p. 109.10.1002/mawe.19840150402 ↗
13. K. Wang and T. Prucher: Adv. Powder Metall. Particulate Mater., 1994, vol. 2, p. 69.
14. N. Ingelstrom and H. Ustimenko: Powder Metall., 1975, vol. 18, p. 303.10.1179/pom.1975.18.36.004 ↗
15. J.T. Barnby, D.C. Ghosh, and K. Dinsdale: Powder Metall., 1973, vol. 16, p. 55.10.1179/pom.1973.16.31.003 ↗
16. Y.W. Mai, B. Cotterell, Hi-Qi He, and Y.B. Ke: in Handbook of Fatigue Crack Propagation in Metallic Structures, Elsevier, Amsterdam 1994, p. 221.
17. G.A. Gegel, P. Kurath, and K. Boswell: Adv. Powder Metall. Particulate Mater., 1996, vol. 13, p. 329.
18. Y.B. Ke, B. Cotterell, and Y.W. Mai: Mater. Sci. Eng., 1989, vol. A117, p. 149.
19. E. Dudrova, R. Bures, M. Kabatova, H. Danninger, and M. Selecka: Euro PM97, European Powder Metallurgy Association, Munich, 1997, p. 373.
20. H. Danninger: Powder Metall. Int., 1988, vol. 20, p. 7.
21. J. Wang and H. Danninger: Wear, 1998, vol. 222, p. 48.10.1016/S0043-1648(98)00279-8 ↗
22. K.-E. Thelning: Steel and Its Heat Treatment, Butterworth and Co., London, 1984.
23. H. Danninger, G. Jangg, B. Weiss, and R. Stickler: Powder Met. Int., 1993, vol. 25, p. 111.
24. MPIF Standard 40, Metal Powder Industries Federation, Princeton, NJ, 1984.
25. G. Straffelini, A. Molinari, D. Spoljaric, and H. Danninger: Adv. Powder Metall. Particulate Mater., 1996, vol. 13, p. 89.
26. V. Fontanari: Master’ Thesis, University of Pisa, Pisa, Italy, 1996.
27. O.E. Okorafor: Mater. Sci. Technol., 1987, vol. 3, p. 118.10.1179/mst.1987.3.2.118 ↗
28. H.J. Schindler, P. Bond, and G. Prandtl: Proc. EGF 12, Sheffield, 1998, vol. 2, p. 1279.
29. W.L. Server: J. Testing Eval., 1978, vol. 6, p. 29.10.1520/JTE10915J ↗
30. T. Kobayashi: Eng. Fract. Mech., 1984, vol. 19, p. 49.10.1016/0013-7944(84)90068-7 ↗
31. J.F. Knott: Fundamentals of Fracture Mechanics, John Wiley & Sons, New York, NY, 1973.
32. J.M. Barsom and S.T. Rolfe: Fracture and Fatigue Control in Structures, 2nd ed., Prentice-Hall, Englewood Cliffs, NJ, 1987.
33. T.L. Anderson: Fracture Mechanics, 2nd ed., CRC Press, Boca Raton, 1995.
34. R.O. Ritchie, B. Francis, and W. Server: Metall. Trans. A, 1976, vol. 7A, pp. 831–38.10.1007/BF02644080 ↗
35. R.O. Ritchie and R.M. Horn: Metall. Trans. A, 1978, vol. 9A, pp. 331–34.10.1007/BF02646382 ↗
36. A. Salak, V. Miskovic, E. Dudrova, and E. Rudnayova: Powder Metall. Int., 1974, vol. 6, p. 128.
37. G. Straffelini, V. Fontanari, and A. Molinari: Mater. Sci. Eng., 1999, vol. A260, p. 197.10.1016/S0921-5093(98)00960-5 ↗
38. G. Straffelini and A. Molinari: Scripta Metall. Mater., 1994, vol. 30, p. 833.10.1016/0956-716X(94)90399-9 ↗
39. G. Straffelini, V. Fontanari, and A. Molinari: Adv. Powder Metall. Particulate Mater., 1994, vol. 2, p. 51.
40. W.W. Gerberich and N. Moody: Fatigue Mechanisms, ASTM, Philadelphia, PA, 1979, p. 292.10.1520/STP35897S ↗
41. W.W. Gerberich S.H. Chen, C.S. Lee, and T. Livne: Metall. Trans. A, 1987, vol. 18A, pp. 1861–75.10.1007/BF02647016 ↗
42. A. Geltmacher and D.A. Koss: Int. J. Powder Metall., 1990, vol. 26, p. 205.
43. R. Haynes: Powder Metall., 1977, vol. 20, p. 17.10.1179/pom.1977.20.1.17 ↗
44. E. Navara and B. Bengtsson: Int. J. Powder Metall. Powder Technol., 1984, vol. 20, p. 33.
45. W.D. Cao and X.P. Lu: Metall. Trans. A, 1989, vol. 20A, pp. 1687–99.10.1007/BF02663201 ↗
46. P. Franklin and B.L. Davies: Powder Metall., 1978, vol. 1, p. 7.10.1179/pom.1978.21.1.7 ↗
47. P. Bompard and D. Francois: Advances in Fracture Research, Pergamon Press, Oxford, United Kingdom, 1984, vol. 3, p. 2049.
48. K.K. Phani and S.K. Niyogi: J. Mater. Sci. Lett., 1986, vol. 5, p. 427.10.1007/BF01672350 ↗
49. M. Srinavas, G. Malakondaiah, R.W. Armstrong, and P. Rama Rao: Acta Metall. Mater., 1991, vol. 39, p. 807.10.1016/0956-7151(91)90280-E ↗
50. M. Eudier: Powder Metall., 1962, vol. 9, p. 26.
51. T. Bell and Y. Sun: Surf. Eng., 1990, vol. 6, p. 133.10.1179/sur.1990.6.2.133 ↗
52. Metals Handbook, 10th ed., vol. 1, Properties and Selection: Irons, Steels, and High-Performance Alloys, ASM International, Metals Park, OH, 1990, pp. 430–48.
53. S.T. Rolfe and S.R. Novak: ASTM STP, ASTM, Philadelphia, PA, 1970, vol. 463, p. 124.
54. R.O. Ritchie and A.W. Thompson: Metall. Trans. A, 1985, vol. 16A, pp. 233–48.10.1007/BF02815305 ↗
55. D.A. Curry and J. Knott: Met. Sci., 1979, vol. 13, p. 341.10.1179/msc.1979.13.6.341 ↗
56. N.J. Petch: Acta Metall., 1986, vol. 34, p. 1387.10.1016/0001-6160(86)90026-X ↗
57. B. Kubicki: Powder Metall., 1995, vol. 38, p. 295.10.1179/pom.1995.38.4.295 ↗