journal article·2013-04

Room-Temperature Mechanochemical Synthesis of W2B5 Powders

Selim Coşkun, M. Lütfi Öveçoğlu

Publisher page

Abstract

The mechanochemical synthesis of W2B5 powders was successfully carried out at room temperature. WO2.72, B2O3 and Mg powder blends were mixed to form batches according to the metallothermic reduction of WO2.72 and B2O3 with Mg, which were subsequently mechanically alloyed (MA) using a Spex mill at different durations to constitute W2B5 + MgO as final products. Following mechanochemical synthesis, MgO was removed from the system by leaching the powders with HCl. Microstructural and morphological characterizations of boride powders were carried out via scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses. Moreover, atomic absorption spectroscopy (AAS) and differential scanning calorimetry (DSC) experiments were carried out to monitor the purity of the powders at different stages of the process. After mechanical alloying of the powder batches comprising 50 pct stoichiometrically excess amount of B2O3 for 30 hours and leaching with a 7 M HCl solution, pure W2B5 powders with an average particle size of 226 nm and an average grain size of 55.3 nm were successfully synthesized.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. E. Lassner and W.D. Schubert: Tungsten: Properties, Chemistry, Technology of the Element, Alloys and Chemical Compounds, Kluwer Academic, New York, NY, 1999.10.1007/978-1-4615-4907-9 ↗
2. K.A. Khor, L.G. Yu, and G. Sundararajan: Thin Solid Films, 2005, vol. 478 (1,2), pp. 232–37.10.1016/j.tsf.2004.07.004 ↗
3. K.F. Cai and C.W. Nan: Ceram Int., 2000, vol. 26 (5), pp. 523–27.10.1016/S0272-8842(99)00089-9 ↗
4. K.B. Kushkhov, V.V. Malyshev, A.A. Tishchenko, and V.I. Shapoval: Powder Metall. Metall. C, 1993, vol. 32, no. 1, pp. 7–10.10.1007/BF00559725 ↗
5. Y. Itoh and Y. Ishiwata: JSME Int. J. A-Mech. M, 1996, vol. 39, no. 3, pp. 429–34.
6. Y.L.G. Wen and T.Q. Lei: J. Eur. Ceram. Soc., 2006, vol. 26, no. 15, pp. 3477–86.10.1016/j.jeurceramsoc.2005.09.031 ↗
7. G. Wen, Y. Lv, and T.Q. Lei: Carbon, 2006, vol. 44, no. 5, pp. 1005–12.10.1016/j.carbon.2005.10.003 ↗
8. E.A. Gorbunov and M.P. Bryksin-Lyamin: Poroshkovaya Metallurgiya, 1971, vol. 4, pp. 91–97.
9. M. Usta, I. Ozbek, M. Ipek, C Bindal, and A.H. Ucisik: Surf. Coat. Technol., 2005, vol. 194 (2,3), pp. 330–34.10.1016/j.surfcoat.2004.06.042 ↗
10. S. Stadler, R.P. Winarski, J.M. MacLaren, T. Eskildsen, J. van Ek, D.L. Ederer, E.Z. Kurmaev, M.M. Grush, T.A. Callcott, A. Moewes, and M. Lee: J. Electron. Spectrosc., 2000, vol. 110 (1–3), pp. 75–86.10.1016/S0368-2048(00)00158-4 ↗
11. V.V. Gostishchev, V.F. Boiko, and N.D. Pinegina: Theor. Found Chem. Ent., 2009, vol. 43, no. 4, pp. 468–72.10.1134/S0040579509040198 ↗
12. P. Peshev, G. Bliznakov, and L. Leyarovska: J. Less-Common Metall., 1967, vol. 13, pp. 241–47.10.1016/0022-5088(67)90188-9 ↗
13. J.F. Shackelford and W. Alexander: Materials Science and Engineering Handbook, 3rd ed., CRC Press LLC, Boca Raton, FL, 2001.10.1201/9781420038408 ↗
14. Y. Lv, G. Wen, L. Song, and T.Q. Lei: Wear, 2007, vol. 262, nos. 5–6, pp. 592–99.10.1016/j.wear.2006.07.013 ↗
15. H. Itoh, T. Matsudaira, S. Naka, H. Hamamoto, and M. Obayashi: J. Mater. Sci., 1987, vol. 22, no. 8, pp. 2811–15.10.1007/BF01086475 ↗
16. N.J. Welham: Miner. Eng., 1999, vol. 12, no. 10, pp. 1213–24.10.1016/S0892-6875(99)00107-7 ↗
17. R. Ricceri and P. Matteazzi: Mater. Sci. Eng. A-Struct., 2004, vol. 379, nos. 1,2, pp. 341–46.10.1016/j.msea.2004.02.064 ↗
18. N. Setoudeh and N.J. Welham: J. Alloy Compd., 2006, vol. 420, nos. 1,2, pp. 225–28.10.1016/j.jallcom.2005.07.083 ↗
19. Y. Hwang and J.K. Lee: Mater. Lett., 2002, vol. 54, no. 1, pp. 1–7.10.1016/S0167-577X(01)00526-2 ↗
20. W.M. Tang, Z.X. Zheng, W.C. Wu, J. Lü, J.W. Liu, and J.M. Wang: Mater. Chem. Phys., 2006, vol. 99, no. 1, pp. 144–49.10.1016/j.matchemphys.2005.09.085 ↗
21. K. Iizumi, C. Sekiya, S. Okada, K. Kudou, and T. Shishido: J. Eur. Ceram. Soc., 2006, vol. 26 (4,5), pp. 635–38.10.1016/j.jeurceramsoc.2005.06.012 ↗
22. K. Kudaka, K. Iizumi, T. Sasaki, and S. Okada: J. Alloy Compd., 2001, vol. 315 (1,2), pp. 104–07.10.1016/S0925-8388(00)01082-3 ↗
23. J.W. Kim, J.H. Shim, J.P. Ahn, Y.W. Cho, J.H. Kim, and K.H. Oh: Mater. Lett., 2008, vol. 62, no. 15, pp. 2461–64.10.1016/j.matlet.2007.12.022 ↗
24. S. Begin-Colin, G. Le Caer, E. Barraud, and O. Humbert: J. Mater. Sci., 2004, vol. 39 (16,17), pp. 5081–89.10.1023/B:JMSC.0000039188.17862.58 ↗
25. M.L. Öveçoglu: Ph.D. Dissertation, Stanford University, Palo Alto, CA, 1987.
26. J.S. Benjamin: Mater. Sci. Forum, 1992, vol. 88, pp. 1–17.10.4028/www.scientific.net/MSF.88-90.1 ↗
27. C. Suryanarayana: Prog. Mater. Sci., 2001, vol. 46 (1,2), pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
28. C. Suryanarayana, E. Ivanov, and V.V. Boldyrev: Mater. Sci. Eng. A-Struct., 2001, vol. 304, pp. 151–58.10.1016/S0921-5093(00)01465-9 ↗
29. M. Stubicar, A. Tonejc, and N. Stubicar: Fizika A, 1995, vol. 4, pp. 65–72.
30. R. Ricceri and P. Matteazzi: J. Alloy Compd., 2003, vol. 358, nos. 1–2, pp. 71–75.10.1016/S0925-8388(03)00125-7 ↗
31. R. Ricceri and P. Matteazzi: Int. J. Powder Metall., 2003, vol. 39, no. 3, pp. 48–52.
32. S. Yazıcı: Master’s Thesis, Istanbul Technical University, Istanbul, Turkey, 2009.
33. E. Bilgi: Master’s Thesis, Middle East Technical University, Ankara, Turkey, 2007.
34. C. Suryanarayana and M.G. Norton: X-Ray Diffraction: A Practical Approach, Plenum Press, New York, NY, 1998.10.1007/978-1-4899-0148-4 ↗
35. İ. Duman: Istanbul Technical University, Istanbul, Turkey, Personal communication, October 20, 2011.
36. P. Walker and W.H. Tarn: Handbook of Metal Etchants, CRC Press LLC, Boca Raton, FL, 1991.10.1201/9780367803087 ↗
37. D. Ağaoğulları, Ö. Balcı, H. Gökçe, İ. Duman, and M.L. Öveçoğlu: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 2520–33.10.1007/s11661-012-1109-5 ↗
38. A. Üçyıldız and İ. Girgin: Cent. Eur. J. Chem., 2010, vol. 8, pp. 758–65.10.2478/s11532-010-0039-6 ↗
39. U. Dosler, M.M. Krzmanc, and D. Suvorov: J. Eur. Ceram. Soc., 2010, vol. 30, pp. 413–18.10.1016/j.jeurceramsoc.2009.05.049 ↗