Microstructural Evolution and Mechanical Properties of Short-Term Thermally Exposed 9/12Cr Heat-Resistant Steels
Source abstract
Abstract
The microstructural evolution during short-term (up to 3000 hours) thermal exposure of three 9/12Cr heat-resistant steels was studied, as well as the mechanical properties after exposure. The tempered martensitic lath structure, as well as the precipitation of carbide and MX type carbonitrides in the steel matrix, was stable after 3000 hours of exposure at 873 K (600 °C). A microstructure observation showed that during the short-term thermal exposure process, the change of mechanical properties was caused mainly by the formation and growth of Laves-phase precipitates in the steels. On thermal exposure, with an increase of cobalt and tungsten contents, cobalt could promote the segregation of tungsten along the martensite lath to form Laves phase, and a large size and high density of Laves-phase precipitates along the grain boundaries could lead to the brittle intergranular fracture of the steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. A. Gustafson and A. John: ISIJ Int., 2001, vol. 41, pp. 356–60.10.2355/isijinternational.41.356 ↗
2. K. Sawada, M. Takeda, K. Maruyama, R. Ishii, M. Yamada, Y. Nagae, and R. Komine: Mater. Sci. Eng. A, 1999, vol. 267, pp. 19–25.10.1016/S0921-5093(99)00066-0 ↗
3. L. Helis, Y. Toda, T. Hara, H. Miyazaki, and F. Abe: Mater. Sci. Eng. A, 2009, vols. 510–511, pp. 88–94.10.1016/j.msea.2008.04.131 ↗
4. K. Yamada, M. Igarashi, S. Muneki, and F. Abe: ISIJ Int., 2003, vol. 43, pp. 1438–43.10.2355/isijinternational.43.1438 ↗
5. Y. Kadoya, B.F. Dyson, and M. McLean: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2549–57.10.1007/s11661-002-0375-z ↗
6. J.S. Lee, H.G. Armaki, K. Maruyama, T. Muraki, and H. Asahi: Mater. Sci. Eng. A, 2006, vol. 428, pp. 270–75.10.1016/j.msea.2006.05.010 ↗
7. F. Abe: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 565–69.10.1016/j.msea.2004.01.057 ↗
8. K. Sawada, K. Kubo, and F. Abe: Mater. Sci. Eng. A, 2001, vols. 319–321, pp. 784–87.10.1016/S0921-5093(01)00973-X ↗
9. T. Jiang, Y. Yu, and B. Zhang: Mater. Mech. Eng., 2011, vol. 35, pp. 90–92.
10. W. Sha, A. Ye, S. Malinov, and E.A. Wilson: Mater. Sci. Eng. A, 2012, vol. 536, pp. 129–35.10.1016/j.msea.2011.12.086 ↗
11. B.C. Kim, S.W. Park, and D.G. Lee: Compos. Struct., 2008, vol. 86, pp. 69–77.10.1016/j.compstruct.2008.03.005 ↗
12. J. Blach, L. Falat, and P. Ševc: Eng. Fail. Anal., 2008, vol. 16, pp. 1397–1403.10.1016/j.engfailanal.2008.09.003 ↗
13. H. Ghassemi-Armaki, R. Chen, K. Maruyama, M. Yoshizawa, and M. Igarashi: Mater. Lett., 2009, vol. 63, pp. 2423–25.10.1016/j.matlet.2009.08.024 ↗
14. H. Cerjak, P. Hofer, and B. Schaffernak: ISIJ Int., 1999, vol. 39, pp. 874–88.10.2355/isijinternational.39.874 ↗
15. J. Cui, I.S. Kim, C.Y. Kang, and K. Miyahara: ISIJ Int., 2001, vol. 41, pp. 368–71.10.2355/isijinternational.41.368 ↗
16. P.V. Thomas, S. Saroja, and M. Vijayalakshmi: J. Nucl. Mater., 2008, vol. 378, pp. 273–81.10.1016/j.jnucmat.2008.06.033 ↗
17. Y. Tsuchida, K. Okamoto, and Y. Tokunaga: ISIJ Int., 1995, vol. 35, pp. 317–23.10.2355/isijinternational.35.317 ↗
18. T. Hasegawa, Y.R. Abe, Y. Tomita, N. Maruyama, and M. Sugiyama: ISIJ Int., 2001, vol. 41, pp. 922–29.10.2355/isijinternational.41.922 ↗
19. P. Fernandez, M. Hernandez-Mayoral, J. Lapena, A. Lancha, and G. De Diego: Mater. Sci. Technol., 2002, vol. 18, pp. 1353–62.10.1179/026708302225007411 ↗
20. J. Hald and Z. Kubon: in Microstructural Development and Stability in High Chromium Ferritic Power Plant Steels, A. Strang and D.J. Gooch, eds., Institute of Materials, London, U.K., 1997, pp. 159–78.
21. H. Naoi, M. Ohgami, Y. Hasegawa, H. Mimura, and T. Fujita: in Advanced Heat Resistant Steel for Power Generation, R. Viswanathan and J. Nutting, eds., Institute of Materials, London, U.K., 1999, pp. 259–69.
22. R. Ishii, Y. Tsuda, M. Yamada, and M. Miyazaki: in Advanced Heat Resistant Steel for Power Generation, R. Viswanathan and J. Nutting, eds., Institute of Materials, London, U.K., 1999, pp. 277–87.
23. Y. He, K. Yang, W.S. Qu, F.Y. Kong, and G.Y. Su: Mater. Lett., 2002, vol. 56, pp. 763–69.10.1016/S0167-577X(02)00610-9 ↗
24. W. Sha, A. Cerezo, and G.D.W. Smith: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 1221–32.10.1007/BF02668190 ↗