Tensile Fracture Behavior of Nicalon/SiC Composites
Source abstract
Abstract
The tensile behavior of Nicalon fiber-reinforced silicon carbide matrix composites (Nicalon/SiC) was investigated with the aid of nondestructive evaluation (NDE) techniques. The NDE techniques include ultrasonic testing (UT), X-ray computed tomography (CT), and infrared (IR) thermography. Before mechanical testing, UT C-scans were developed to investigate defect distributions and to detect variations in the internal flaws. X-ray CT was used to characterize the type of defects and the location of flaws in composites to compare with UT C-scan results. The IR thermography was employed to monitor temperature evolution during tensile testing. This article also investigated the feasibility of using multiple NDE techniques as a means of assessing integrity for Nicalon/SiC composites. Microstructural characterization was performed using scanning electron microscopy (SEM) to investigate failure mechanisms of Nicalon/SiC composites, and the results were compared with NDE data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. R.L. Lehman, S.K. El-Rahaiby, and J.B. Wachtman: Handbook on Continuous Fiber-Reinforced Ceramic Matrix Composites, American Ceramics Society, Westerville, OH, 1995, pp. 495–526
2. K.K. Chawla: Ceramic Matrix Composites. Chapman & Hall, London, 1993, pp. 4–9
3. M.A. Karnitz, D.F. Craig, S.L. Richlen: Ceram. Bull., 1991, vol. 70 (3), pp. 430–35
4. P.K. Liaw: Fiber-Reinforced CMCs: Processing, Mechanical Behavior and Modeling, JOM, Warrendale, PA, 1995, pp. 38–44
5. J.A. Dicarlo: Adv. Mater. Proc., 1989, June, pp. 41–46
6. A.G. Evans, D.B. Marshall: Acta Metall. Mater., 1989, vol. 37, pp. 2567–8310.1016/0001-6160(89)90291-5 ↗
7. N. Chawla: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2423–2710.1007/s11661-997-0199-y ↗
8. J. Kim, P.K. Liaw: J. Eng. Mater. Technol, 2005, vol. 127, pp. 8–1510.1115/1.1836766 ↗
9. J. Kim, P.K. Liaw: Mater. Sci. Eng. A, 2005, vol. 409, pp. 302–0810.1016/j.msea.2005.07.061 ↗
10. G. Mott, P.K. Liaw: Metall. Trans. A, 1988, vol. 19A, pp. 2233–4610.1007/BF02645047 ↗
11. P.K. Liaw, R.E. Shannon, and W.G. Clark Jr.: Proc. Symp. “Fundamental Relationships between Microstructures and Mechanical Properties of Metal Matrix Composites”. In M.N. Gungor, P.K. Liaw, eds., TMS-AIME, Warrendale, PA, 1990, pp. 581–615
12. P.K. Liaw, R.E. Shannon, W.G. Clark, Jr., and W.C. Harrigan, Jr.: Morris E. Fine Symp., P.K. Liaw, J.R. Weertman, H.L. Marcus, and J.S. Santner, eds., TMS-AIME, Warrendale, PA, 1991, pp. 193–208
13. P.K. Liaw, Y. Ijiri, B.J. Taszarek, S. Frohlich, M.N. Gungor, W.A. Logsdon: Metall. Trans.A., 1990, vol. 21A, pp. 529–3810.1007/BF02671925 ↗
14. Y. Ijiri, P.K. Liaw, B.J. Taszarek, S. Frohlich, M.N. Gungor: Metall. Trans. A, 1988, vol. 19A, pp. 2215–2410.1007/BF02645045 ↗
15. W.G. Clark Jr., J.N. Iyer: Mater. Eval., 1989, vol. 47, pp. 460–65
16. W.G. Clark Jr., R.E. Shannon: Adv. Mater. Processing, 1990, vol. 137, pp. 59–69
17. ASM Handbook, vol. 17, Nondestructive Evaluation and Quality Control, ASM INTERNATIONAL, Metals Park, OH, 1992, pp. 284–93
18. D.K. Hsu, P.K. Liaw, N. Yu, V. Saini, N. Miriyala, L.L. Snead, R.A. Lowden, C.J. McHargue: Mater. Res. Soc. Symp. Proc., 1995, vol. 365, pp. 203–0810.1557/PROC-365-203 ↗
19. P.K. Liaw, N. Yu, D.K. Hsu, N. Miriyala, V. Saini, L.L. Snead, C.J. McHargue, R.A. Lowden: J. Nucl. Mater., 1995, vol. 219, pp. 93–10010.1016/0022-3115(94)00664-4 ↗
20. P.K. Liaw, D.K. Hsu, N. Yu, N. Miriyala, V. Saini, H. Jeong: Acta Metall. Mater., 1996, vol. 44(5), pp. 2101–1310.1016/1359-6454(95)00324-X ↗
21. J.H. Kinney, D.L. Haupt: J. Mater. Res., 1997, vol. 12(3), pp. 610–1210.1557/JMR.1997.0091 ↗
22. S. Lee, S.R. Stock, M.D. Butts, T.L. Starr, T.M. Breunig, J.H. Kinney: J. Mater. Res., 1998, vol. 13(5), pp. 1209–1710.1557/JMR.1998.0172 ↗
23. M. Surgeon, E. Vanswijgenhoven, M. Wevers, O. Van Der Biest: Compos., Part A, 1997, vol. 28A, pp. 473–8010.1016/S1359-835X(96)00147-9 ↗
24. J. Luo, S. Wooh, I.M. Daniel: J. Comp. Mater., 1995, vol. 29 (15), pp. 1946–6110.1177/002199839502901501 ↗
25. T.M. Besmann, B.W. Sheldon, R.A. Lowen, D.P. Stinton: Science, 1991, vol. 253, pp. 1104–0910.1126/science.253.5024.1104 ↗
26. D.P. Stinton, A.J. Caputo, R.A. Lowden: Am. Ceram. Soc. Bull., 1986, vol. 65 (2), pp. 347–50
27. S.I. Ganchev, R.J. Runser, N. Qaddoumi, E. Ranu, G. Carriveau: Mater. Eval., 1995, vol. 53(4), pp. 463–67
28. ASM Handbook, vol. 17, Nondestructive Evaluation and Quality Control, ASM INTERNATIONAL, Materials Park, OH, 1992, pp. 231–36
29. J. Krautkramer, H. Krautkramer: Ultrasonic Testing of Materials, 4th ed., Springer-Verlag, New York, NY, 199010.1007/978-3-662-10680-8 ↗
30. D.C. Kunerth, L.A. Lott, J.B. Walter: Ceram. Eng. Sci. Proc., 1990, vol. 11(9–11), pp. 1685–9510.1002/9780470313053.ch42 ↗
31. P.C. Copley, J.W. Eberhand, and G.A. Mohr: JOM, 1994, Jan., pp. 14–2610.1007/BF03222531 ↗
32. D.H. Phillips, J.J. Lannutti: Am. Ceram. Soc. Bull., 1993, vol. 72(11), pp. 69–75
33. Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Specimens at Ambient Temperatures, C1275-00, ASTM, Philadelphia, PA, 2000