journal article·2003-12

Effect of crucible diameter reduction on the convection, macrosegregation, and dendritic morphology during directional solidification of Pb-2.2 wt pct Sb alloy

Jun Chen, S. N. Tewari, G. Magadi, H. C. de Groh

Publisher page

Abstract

The Pb-2.2 wt pct Sb alloy has been directionally solidified in 1-, 2-, 3-, and 7-mm-diameter crucibles with planar and dendritic liquid-solid interface orphology. For plane front solidification, the experimentally observed macrosegregation along the solidified length follows the relationship proposed by Favier. Application of a 0.4 T transverse magnetic field has no effect on the extent of convection. Reducing the ampoule diameter appears to decrease the extent of convection. However, extensive convection is still present even in the 1-mm-diameter crucible. An extrapolation of the observed behavior indicated that nearly diffusive transport conditions require ampoules that are about 40 microns in diameter. Reduction of the crucible diameter does not appear to have any significant effect on the primary dendrite spacing. However, it results in considerable distortion of the dendrite morphology and ordering. This is especially true for the 1-mm diameter samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · nanoparticles nucleation surface interactions · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. S.H. Davis: in Handbook of Crystal Growth I Fundamentals, Part B: Transport and Stability, D.T.J. Hurle, ed., North-Holland, Amsterdam, 1993, pp. 859–97.
2. S.R. Coriell, B.T. Murray, A.A. Chernov, and G.B. McFadden: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 687–94.10.1007/BF02648955 ↗
3. J.J. Favier and A. Rouzad: J. Cryst. Growth, 1987, vol. 64, pp. 367–72.10.1016/0022-0248(83)90145-8 ↗
4. S.N. Tewari and M.A. Chopra: J. Cryst. Growth, 1992, vol. 118, pp. 183–92.10.1016/0022-0248(92)90063-O ↗
5. H. Yu, K.N. Tandon, and J.R. Cahoon: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1245–50.10.1007/s11661-997-0290-4 ↗
6. M.D. Dupouy, D. Camel, and J.J. Favier: Acta Metall. Mater., 1992, vol. 40, pp. 1791–99.10.1016/0956-7151(92)90122-U ↗
7. T. Okamoto, K. Kishitake, and I. Bessho: J. Crystal Growth, 1975, vol. 29, pp. 131–36.10.1016/0022-0248(75)90216-X ↗
8. R. Trivedi, H. Miyahara, P. Mazumder, E. Simsek, and S.N. Tewari: J. Cryst. Growth, 2000, vol. 222, pp. 365–79.10.1016/S0022-0248(00)00761-2 ↗
9. R. Trivedi, S. Liu, P. Mazumder, and E. Simsek: Sci. Technol. Adv. Mater., 2001, vol. 2, pp. 309–20.10.1016/S1468-6996(01)00062-6 ↗
10. S.N. Ojha, G. Ding, Y. Lu, J. Reye, and S.N. Tewari: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2167–71.10.1007/s11661-999-0028-6 ↗
11. S.N. Tewari and R. Shah: Metall. Mater. Trans. A, 1992, vol. 23A, pp. 3383–92.10.1007/BF02663448 ↗
12. S.N. Tewari, R. Shah, and H. Song: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1535–44.10.1007/BF02665485 ↗
13. Metals Handbook, ASM, Metals Park, OH, 1973, vol. 8, p. 329.
14. K. Niwa, M. Shimoji, S. Kado, Y. Watanabe, and T. Yokokawa: Trans. AIME, 1957, vol. 209, pp. 96–101.
15. S.N. Tewari, Y.H. Weng, G.L. Ding, and R. Trivedi: Metall. Mater. Trans. A, 2002, vol 33A, pp. 1229–43.10.1007/s11661-002-0224-0 ↗
16. J.D. Hunt and S.Z. Lu: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 611–23.10.1007/BF02648950 ↗
17. J.J. Favier: Acta Metall., 1981, vol. 29, pp. 197–204.10.1016/0001-6160(81)90099-7 ↗
18. J.J. Favier: Acta Metall., 1981, vol. 29, pp. 205–14.10.1016/0001-6160(81)90100-0 ↗