journal article·2013-07

Numerical and Experimental Study on Residual Stress in Gray Cast Iron Stress Lattice Shape Casting

Yuichi Motoyama, Hiroki Takahashi, Toshimitsu Okane, Yoya Fukuda, Makoto Yoshida

Publisher page

Abstract

The prediction of residual stress in a stress lattice shape casting (stress lattice) has been conducted and discussed by some researchers via the Finite Element Method (FEM). However, most of the previous studies used the first-order tetrahedral element, which has poor analysis accuracy in problems including bending. The use of the first-order tetrahedral element makes the verification of these studies uncertain because the bending deformation essentially occurs in the stress lattice casting. This study first shows that the thermal stress analysis for the stress lattice should use the element that can represent the bending deformation in principle for bending of the thin parts. Second, the simulated residual stress was compared with the measured value. The thermal stress analysis successfully predicted the residual stress of the stress lattice casting with and 11 pct difference. In addition to the prediction of the residual stress, it is important from the viewpoint of the productivity of castings to reveal the effect of the shake-out temperature on the residual stress. However, in the previous studies, conclusions concerning the effect of the shake-out temperature on the residual stress were not consistent (i.e., the one study said the higher shake-out temperature decreased the residual stress, and another study said a higher shake-out temperature increased the residual stress). Therefore, the current study first discusses the reason for the inconsistent conclusions in the previous studies. Second, stress lattice castings were cast and shaken out at various shake-out temperatures. Then, the current study validated the effect of the shake-out temperature on the residual stress. Consequently, the experimental results supported the conclusion of Kasch and Mikelonis that the shake-out at higher temperature contributed to the increase of the residual stress in the casting.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. C.O. Burgess: Foundry, 1953, August (8), pp. 112–15, 128–31, 302–05.
2. R.A. Dodd: J. Inst. Met. 1952–1953, vol. 81, pp. 77–81.10.1175/1520-0493(1953)081<0077:TWACOM>2.0.CO;2 ↗
3. I. Budić and D. Novoselović: Metslurgija, 2005, vol. 44 (4), pp. 285–89.
4. Balasingh C., Seshadri M.R., Srinivasan M.N., Ramaseshan S: J. Mech. Work. Technol., 1984, vol. 9, pp. 53-66.10.1016/0378-3804(84)90093-7 ↗
5. F.E. Kasch, P.J. Mikelonis: Trans. Am. Foundry Soc., 1969, vol.77, pp. 77-89.
6. H. Li, J. Shi, R. Zong, X. Wang (2009) Front. Mater. Sci. China, vol. 3(4), 421–25.10.1007/s11706-009-0065-5 ↗
7. Y. Yang, W. Luo, M. Chen, G. Shao (2009) Front. Mater. Sci. China, vol. 3(3), pp. 301-05.10.1007/s11706-009-0049-5 ↗
8. S.-M. Lee and W.-J. Lee: J. Mater. Eng. Perform., 2005, vol. 14 (3), pp. 388–94.10.2307/j.ctvmx3j3j.107 ↗
9. Report of Sub-Committee T.S.18 of the Technical Council: Proceedings of the Institute of British Foundrymen, 1949, vol. 42, pp. A61–77.
10. A. Portevin and J. Pomey: Proceedings of the Institute of British Foundrymen, 1955, Paper no. 1120.
11. J. Campbell: Castings, 2nd ed., Butterworth-Heinemann, Oxford, U.K., 2003, p. 261.
12. E. Gustafsson, M. Hofwing, N. Strömberg: J. Mater. Process. Technol., 2009, vol. 209, pp. 4320-28.10.1016/j.jmatprotec.2008.11.025 ↗
13. Abaqus 6.10 Analysis User’s Manual Japanese edition, vol. 4, p. 82.
14. Sogo Imono Center: Chutetsu no koontokusei, 1980, p. 64.
15. B.B. Nyichomba and J. Campbell: Int. J. Cast Met. Res., 1998, vol. 11, pp. 163–77.10.1080/13640461.1998.11819271 ↗
16. C.S.E. Mkumbo, B.B. Nyichomba, J. Campbell, M. Tiryakioglu: Int. J. Cast Met. Res., 2002, vol. 14, pp. 225-34.10.1080/13640461.2002.11819441 ↗
17. R.N. Parkins and A. Cowan: Proceedings of the Institute of British Foundrymen, 1953, Paper No. 1062.