Relationships Between the Phase Transformation Kinetics, Texture Evolution, and Microstructure Development in a 304L Stainless Steel Under Biaxial Loading Conditions: Synchrotron X-ray and Electron Backscatter Diffraction Studies
Source abstract
Abstract
The relationships between the martensitic phase transformation kinetics, texture evolution, and the microstructure development in the parent austenite phase were studied for a 304L stainless steel that exhibits the transformation-induced plasticity effect under biaxial loading conditions at ambient temperature. The applied loading paths included: pure torsion, simultaneous biaxial torsion/tension, simultaneous biaxial torsion/compression, and stepwise loading of tension followed by torsion (i.e., first loading by uniaxial tension and then by pure torsion in sequence). Synchrotron X-ray and electron backscatter diffraction techniques were used to measure the evolution of the phase fractions, textures, and microstructures as a function of the applied strains. The influence of loading character and path on the changes in martensitic phase transformation kinetics is discussed in the context of (1) texture-transformation relationship and the preferred transformation of grains belonging to certain texture components over the others, (2) effects of axial strains on shear band evolutions, and (3) volume changes associated with martensitic transformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. J.A. Venables, Philos Mag, 7 (1962) 35.10.1080/14786436208201856 ↗
2. G.B. Olson, M. Cohen, Metall Trans, A 6 (1975) 791-795.10.1007/BF02672301 ↗
3. E.C. Oliver, P.J. Withers, M.R. Daymond, S. Ueta, T. Mori, Appl Phys A-Mater, 74 (2002) S1143-S1145.10.1007/s003390201555 ↗
4. J.R. Patel, M. Cohen, Acta Metall, 1 (1953) 531-538.10.1016/0001-6160(53)90083-2 ↗
5. B.R. Banerjee, J.M. Capenos, and J.J. Hauser: in Application of Fracture Toughness Parameters to Structural Metals, Gordon and Breach, 1966.
6. K.X. Tao, D.W. Brown, S.C. Vogel, H. Choo, Metall Mater Trans A, 37A (2006) 3469-3475.10.1007/s11661-006-1042-6 ↗
7. T. Angel, J Iron Steel I, 177 (1954) 165.
8. S.S. Hecker, M.G. Stout, K.P. Staudhammer, J.L. Smith, Metall Trans A, 13 (1982) 619-626.10.1007/BF02644427 ↗
9. E. Cakmak, S.C. Vogel, H. Choo, Mater Sci Eng A-Struct, 589 (2014) 235-241.10.1016/j.msea.2013.09.093 ↗
10. B. Petit, N. Gey, M. Cherkaoui, B. Bolle, M. Humbert, Int J Plasticity, 23 (2007) 323-341.10.1016/j.ijplas.2006.07.002 ↗
11. C. Garion, B. Skoczen, S. Sgobba, Int J Plasticity, 22 (2006) 1234-1264.10.1016/j.ijplas.2005.08.002 ↗
12. J.A. Lichtenfeld, M.C. Mataya, C.J. Van Tyne, Metall Mater Trans A, 37A (2006) 147-161.10.1007/s11661-006-0160-5 ↗
13. G.L. Huang, D.K. Matlock, G. Krauss, Metall Trans A, 20 (1989) 1239-1246.10.1007/BF02647406 ↗
14. S. Cheng, Y.D. Wang, H. Choo, X.L. Wang, J.D. Almer, P.K. Liaw, Y.K. Lee, Acta Mater, 58 (2010) 2419-2429.10.1016/j.actamat.2009.12.028 ↗
15. K.X. Tao, H. Choo, H.Q. Li, B. Clausen, J.E. Jin, Y.K. Lee, Appl. Phys. Lett., 2007, vol. 90, 101911.10.1063/1.2711758 ↗
16. K. Asoo, Y. Tomota, S. Harjo, Y. Okitsu, ISIJ Int, 51 (2011) 145-150.10.2355/isijinternational.51.145 ↗
17. T. Iwamoto, T. Tsuta, Int J Plasticity, 16 (2000) 791-804.10.1016/S0749-6419(99)00079-0 ↗
18. K.X. Tao, J.J. Wall, H.Q. Li, D.W. Brown, S.C. Vogel, H. Choo, J Appl Phys, 100:123515 (2006).10.1063/1.2402474 ↗
19. R. Blonde, E. Jimenez-Melero, L. Zhao, J.P. Wright, E. Bruck, S. van der Zwaag, N.H. van Dijk, Acta Mater, 60 (2012) 565-577.10.1016/j.actamat.2011.10.019 ↗
20. S. Cheng, X.L. Wang, Z.L. Feng, B. Clausen, H. Choo, P.K. Liaw, Metall Mater Trans A, 39A (2008) 3105-3112.10.1007/s11661-008-9604-4 ↗
21. N. Jia, Z.H. Cong, X. Sun, S. Cheng, Z.H. Nie, Y. Ren, P.K. Liaw, Y.D. Wang, Acta Mater, 57 (2009) 3965-3977.10.1016/j.actamat.2009.05.002 ↗
22. Y. Tomota, H. Tokuda, Y. Adachi, M. Wakita, N. Minakawa, A. Moriai, Y. Morii, Acta Mater, 52 (2004) 5737-5745.10.1016/j.actamat.2004.08.016 ↗
23. S.A. Kulin, M. Cohen, B.L. Averbach, JOM-J Met, 4 (1952) 661-668.10.1007/BF03397742 ↗
24. L.E. Murr, K.P. Staudhammer, S.S. Hecker, Metall Trans A, 13 (1982) 627-635.10.1007/BF02644428 ↗
25. R.K. Ray, J.J. Jonas, M.P. Butronguillen, J. Savoie, ISIJ Int, 34 (1994) 927-942.10.2355/isijinternational.34.927 ↗
26. R.K. Ray, J.J. Jonas, Int Mater Rev, 35 (1990) 1-36.10.1179/095066090790324046 ↗
27. E. Cakmak, H. Choo, K. An, Y. Ren, Acta Mater, 60 (2012) 6703-6713.10.1016/j.actamat.2012.08.040 ↗
28. E.S. Perdahcioglu, H.J.M. Geijselaers, J. Huetink, Mater Sci Eng A-Struct, 481 (2008) 727-731.10.1016/j.msea.2007.02.153 ↗
29. G.R. Canova, U.F. Kocks, J.J. Jonas, Acta Metall, 32 (1984) 211-226.10.1016/0001-6160(84)90050-6 ↗
30. F. Montheillet, M. Cohen, J.J. Jonas, Acta Metall, 32 (1984) 2077-2089.10.1016/0001-6160(84)90187-1 ↗
31. F. Montheillet, P. Gilormini, J.J. Jonas, Acta Metall, 33 (1985) 705-717.10.1016/0001-6160(85)90035-5 ↗
32. J. Baczynski, J.J. Jonas, Acta Mater, 44 (1996) 4273-4288.10.1016/1359-6454(96)00114-0 ↗
33. L.S. Toth, J.J. Jonas, P. Gilormini, B. Bacroix, Int J Plasticity, 6 (1990) 83-108.10.1016/0749-6419(90)90031-9 ↗
34. M.P. Miller, D.L. McDowell, J Eng Mater-T ASME, 118 (1996) 28-36.10.1115/1.2805930 ↗
35. A.A. Lebedev, V.V. Kosarchuk, Int J Plasticity, 16 (2000) 749-767.10.1016/S0749-6419(99)00085-6 ↗
36. R. Woracek, D. Penumadu, N. Kardjilov, A. Hilger, M. Boin, J. Banhart, I. Manke, Adv Mater, 26 (2014) 4069-4073.10.1002/adma.201400192 ↗
37. G.E. Dieter (1983) Mechanical Metallurgy, SI Metric ed., New York: McGraw Hill.
38. P. Chapellier, R.K. Ray, J.J. Jonas, Acta Metall Mater, 38 (1990) 1475-1490.10.1016/0956-7151(90)90116-X ↗
39. M. Doner, H. Chang, H. Conrad, J Mech Phys Solids, 22 (1974) 555-573.10.1016/0022-5096(74)90034-9 ↗
40. L. Lutterotti, S. Matthies, H.R. Wenk, A.S. Schultz, J.W. Richardson, J Appl Phys, 81 (1997) 594-600.10.1063/1.364220 ↗
41. F. Bachmann, R. Hielscher, H. Schaeben, Sol St Phen, 160 (2010) 63-68.10.4028/www.scientific.net/SSP.160.63 ↗
42. P. Hedstrom, U. Lienert, J. Almer, M. Oden, Scripta Mater, 56 (2007) 213-216.10.1016/j.scriptamat.2006.10.009 ↗
43. E. Cakmak, H. Choo, K. An, Y. Ren, Mater Lett, 65 (2011) 3013-3015.10.1016/j.matlet.2011.06.065 ↗
44. L.S. Toth, P. Gilormini, J.J. Jonas, Acta Metall, 36 (1988) 3077-3091.10.1016/0001-6160(88)90045-4 ↗
45. K. Sekine, P. Van Houtte, J. Gil Sevillano, and E. Aernoudt: 6th Proceedings of the International Conference Textures Materials, 1981, pp. 396–407.
46. P. Van Houtte, E. Aernoudt, and K. Sekine: 6th Proceedings of the International Conference Textures Materials, 1981, vol. 1, pp. 337–46.
47. R.A. Lebensohn, C.N. Tome, Acta Metall Mater, 41 (1993) 2611-2624.10.1016/0956-7151(93)90130-K ↗
48. L.S. Toth, K.W. Neale, J.J. Jonas, Acta Metall, 37 (1989) 2197-2210.10.1016/0001-6160(89)90145-4 ↗
49. J.J. Jonas, L.S. Toth, Scripta Metall Mater, 27 (1992) 1575-1580.10.1016/0956-716X(92)90147-7 ↗
50. Q. Xue, J.F. Bingert, B.L. Henrie, G.T. Gray, Mater Sci Eng A-Struct, 473 (2008) 279-289.10.1016/j.msea.2007.04.048 ↗
51. F.J. Humphreys, J Mater Sci, 36 (2001) 3833-3854.10.1023/A:1017973432592 ↗
52. J.J. Jonas, Int J Mech Sci, 35 (1993) 1065-1077.10.1016/0020-7403(93)90056-Z ↗
53. A. Das, S. Tarafder, Int J Plasticity, 25 (2009) 2222-2247.10.1016/j.ijplas.2009.03.003 ↗
54. T. Ungar, L.S. Toth, J. Illy, I. Kovacs, Acta Metall, 34 (1986) 1257-1267.10.1016/0001-6160(86)90012-X ↗
55. L.S. Toth, J. Lendvai, I. Kovacs, B. Albert, J Mater Sci, 20 (1985) 3983-3987.10.1007/BF00552388 ↗
56. K. Spencer, J.D. Embury, K.T. Conlon, M. Veron, Y. Brechet, Mater Sci Eng A-Struct, 387-89 (2004) 873-881.10.1016/j.msea.2003.11.084 ↗
57. H. Fujita, S. Ueda, Acta Metall, 20 (1972) 759.10.1016/0001-6160(72)90104-6 ↗
58. J. Weertman, S.S. Hecker, Mech of Mater, 2 (1983) 89-101.10.1016/0167-6636(83)90029-7 ↗
59. A. Shibata, H. Yonezawa, K. Yabuuchi, S. Morito, T. Furuhara, T. Maki, Mater Sci Eng A-Struct, 438 (2006) 241-245.10.1016/j.msea.2005.12.044 ↗
60. C.L. Magee, R.G. Davies, Acta Metall, 20 (1972) 1031.10.1016/0001-6160(72)90137-X ↗
61. A.J. McEvily, R.C. Ku, T.L. Johnston, T Metall Soc AIME, 236 (1966) 108.
62. E.C. Bain, T Am I Min Met Eng, 70 (1924) 25-46.
63. F. Marketz, F.D. Fischer, Comp Mater Sci, 3 (1994) 307-325.10.1016/0927-0256(94)90146-5 ↗
64. T. Iwamoto, T. Tsuta, Y. Tomita, Int J Mech Sci, 40 (1998) 173.10.1016/S0020-7403(97)00047-7 ↗
65. V. Talyan, R.H. Wagoner, J.K. Lee, Metall Mater Trans A, 29 (1998) 2161-2172.10.1007/s11661-998-0041-1 ↗