The Effect of Minor Addition of Ni on the Microstructural Evolution and Mechanical Properties of Suction Cast Al-0.14 at. pct Sc Binary Alloy
Source abstract
Abstract
Aluminum scandium binary alloys represent a promising precipitation-hardening alloy system. However, the hardness of the binary alloys decreases with the rapid coarsening of Al3Sc precipitate during high-temperature aging. In the current study, we report a new approach to compensate for the loss of mechanical properties by combining rapid solidification with very small ternary addition of transition metal Ni. This addition yields dispersion, and at a critical concentration improves the mechanical properties. We explore additions of a maximum of 0.06 at. pct of Nickel to a binary Al-0.14 at. pct Sc alloy, which yield nickel-rich dispersions. We report two kinds of biphasic dispersions containing AlNi2Sc/Al9Ni2 and α-Al/Al9Ni2 phase combinations. The maximum improvement in mechanical properties occurs with the addition of 0.045 at. pct Ni with a yield strength of 239 ± 7 MPa for an aging treatment at 583 K (310 °C) for 15 hours.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. V.I.Elagin: Met. Sci. Heat Treat., 2007, vol. 49 (9–10), pp. 427-34.10.1007/s11041-007-0081-y ↗
2. R.A. Karnesky, M.E. Dalen, D.C. Dunand and D.N. Seidman : Scripta Mater., 2006,vol. 55, pp. 437-40.10.1016/j.scriptamat.2006.05.021 ↗
3. B.A. Parker, Z.F. Zhou and P. Nolle: J. Mater. Sci., 1995, vol 30, pp. 452-58.10.1007/BF00354411 ↗
4. V.V.Zakharov: Met. Sci. Heat Treat., 2003, vol. 45 (7–8), pp. 246–53.10.1023/A:1027368032062 ↗
5. B. Fuller, D.N. Seidman and D.C. Dunand: Scripta Mater., 1999,vol. 40 (6), pp. 691-96.10.1016/S1359-6462(98)00468-0 ↗
6. J.Røyset and N.Ryum: Int. Mater. Rev., 2005,vol. 50 (1), pp. 19-44.10.1179/174328005X14311 ↗
7. N. Blake and M. A. Hopkins: J. Mater. Sci., 1985, vol. 20, pp. 2861–67.10.1007/BF00553049 ↗
8. S.J.Fujikawa, M.Sugaya, H.Takei and K.I. Hirano: J. Less-Common Met., 1979, vol. 63, pp. 87-97.10.1016/0022-5088(79)90211-X ↗
9. E.A.Marquis and D.N.Seidman: Acta Mater., 2001,vol. 49, pp. 1909-919.10.1016/S1359-6454(01)00116-1 ↗
10. K. Chattopadhyay, S. Lele, P. Ramachandrarao, and T.R. Anantharaman: Proc. Second Int. Conf. on Rapidly Quenched Metals, MIT, Cambridge, MA, 1976, pp. 157–61.
11. A.Yamamoto and H.Tsubakino: Scripta Mater., 1997,vol. 37 (11),pp.1721-25.10.1016/S1359-6462(97)00329-1 ↗
12. J.A. Goebel and S.Rosen: J. Less-Common Met., 1968, vol. 16, pp. 441-446.10.1016/0022-5088(68)90142-2 ↗
13. K.B. Povarova, N. K. Kazanskaya, A.A.Drozdov and A.E.Morozov: Russ. Metall. (USSR), 2008, vol. 2008 (1), pp. 46-51.10.1134/S0036029508010096 ↗
14. V.G. Davydov, T.D. Rostova, V.V. Zakharov, Y.A. Filatov and V.I. Yelagin: Mater. Sci. Eng., 2000, vol. A280, pp. 30–36.10.1016/S0921-5093(99)00652-8 ↗
15. E.A.Marquis and D.N.Seidman: Surf. Interface Anal., 2004, vol. 36, pp. 559–63.10.1002/sia.1699 ↗
16. C. Pohla and P.L. Ryder: Acta Mater., 1997, vol. 45(5), pp. 2155-66.10.1016/S1359-6454(96)00317-5 ↗
17. W. J. Boettinger, L.A.Bendersky, R.J.Schaefer and F. S.Biancaniello: Metall. Trans. A, 1988, vol. 19A, pp. 1101-07.10.1007/BF02628394 ↗
18. A.F. Norman, P.B. Prangnell and R.S. McEwen: Acta Mater., 1998, vol. 46 (16), pp. 5715-32.10.1016/S1359-6454(98)00257-2 ↗
19. V.I. Elagin, V.V. Zakharov and T.D. Rostova: Met. Sci. Heat Treat., 1983, vol. 25 (7), pp. 546-49.10.1007/BF00741946 ↗
20. C.B. Fuller, D.N.Seidman and D.C. Dunand: Acta Mater., 2003,vol. 51, pp. 4803-14.10.1016/S1359-6454(03)00320-3 ↗
21. G.E. Dieter: Mechanical Metallurgy, SI Metric ed., McGraw-Hill, UK, 1988, pp. 218–19.
22. K.L.Kendig and D.B.Miracle: Acta Mater., 2002, vol. 50, pp.4165-75.10.1016/S1359-6454(02)00258-6 ↗
23. K. Dinsdale, S.J. Harris and B. Noble: Aluminum-Lithium Alloys, Metall. Soc. A.I.M.E., Philadelphia, PA, 1981, p. 101-18.