Fast aging kinetics of the AA6016 Al-Mg-Si alloy and the application in forming process
Source abstract
Abstract
Preaging treatment of AA6000 alloys has been a focus of alloy development for automotive applications. A much better bake-hardening response can be achieved with preaged materials compared to those in the naturally aged state. Recently, fast aging kinetics have been found in preaged AA6016 alloys. A heat treatment at 230 °C to 260 °C for over 60 seconds can increase the strength of the material, in particular, the yield strength, significantly. Observations of high-resolution transmission electron microscopy (HRTEM) indicate that relatively large clusters exist in the preaged state; they can grow rapidly into needle-shaped semicoherent precipitates at 230 °C for over 60 seconds, leading to the rapid changes in the mechanical properties. During heat treatment at higher temperatures, the preaged material behaved in a similar manner as the naturally aged material. The fast aging kinetics have been applied in making thermal-treated blanks with microstructural gradients. The blanks were treated locally at 230 °C for approximately 90 seconds to increase the strength of the local region. A heat treatment at temperatures higher than 350 °C for approximately 10 seconds can effectively reduce the strength. A combination of these two treatments applied to different locations of a blank, introducing strong gradients in the mechanical properties, can improve the forming performance of the material significantly, relative to the homogeneous blanks in the original condition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. D. Wilson: J. Mech. Working Technol., 1988, vol. 16, pp. 257–77.10.1016/0378-3804(88)90055-1 ↗
2. E.G. Meader: Engineering, 1956, vol. 181, pp. 48–52.
3. P. Bate, D.J. Barrett, S. Rhaipu, H. Schofield, and J.-Q. Jiang: Proc. 20th Biennial Congr. International Deep Drawing Research Group, Genval, Belgium, CRM, Liege, Belgium, 1998, pp. 467–77.
4. L. Zhuang, J.E. Janse, P. De Smet, J.H. Chen, and H.W. Zandbergen: TMS Proceedings “Aluminium 2001—Aluminium Automotive & Joining Symposia”, New Orleans, LA, 2001, S.K. Das, J.G. Kaufman, and T.J. Lienert, eds., TMS, Warrendale, PA, pp. 77–91.
5. J. Bottema, C. Lahaye, R. Baartman, L. Zhuang, and P. De Smet: Conf. Proc. SAE ’98 “Product & Process Intergration: Advanced Technology”, Detroit, MI, 1998, SAE, Warrendale, PA, pp. 99–105.
6. S.J. Murtha, J.M. Story, D.J. Spinella, S. McCleary, L. Vega, and E.L. Colvin: Conf. Proc. “Body Design & Engineering”, IBEC ′96, Detroit, MI, 1996, M. Nasim Uddin, ed., ATG, Warren, MI, vol. 20, pp. 1–13.
7. H.J. Bunge: Texture Analysis in Materials Science, Butterworth and Co., London, 1982.