journal article·2002-02

Predictive capabilities of the dislocation-network theory of Harper-Dorn creep

M. A. Przystupa, A. J. Ardell

Publisher page

Abstract

The dislocation-network theory of Harper-Dorn (H-D) creep is reformulated using a new equation for the kinetics of growth of individual dislocation links in the network. The new kinetic equation has no impact on the scaled differential equation derived previously, which predicts the distribution of link lengths. However, the new theory predicts slightly different behavior for the kinetics of static recovery and leads to a new equation for the strain rate, which is expressed in terms of parameters that can be evaluated independently. This equation is valid not only for steady-state H-D creep, but is also valid for primary creep, provided the instantaneous value of the dislocation density is known. Using data on the variation of dislocation density with time, calculated values of the creep rates for Al deformed in the H-D regime agree with experimentally measured values to within a factor of 2. Creep curves for Al are calculated with the same degree of accuracy. These calculations involve no adjustable parameters. Steady-state creep rates for many materials presumably deformed in the H-D creep regime are compared with the predictions of the new equation for the strain rate. The calculated values agree with experimentally measured data to within a factor of about 150, which compares well with the predictions of other equations proposed in the literature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. S.K. Mitra and D. McLean: Met. Sci. J., 1967, vol. 1, pp. 192–98.10.1080/00260681.1967.11814010 ↗
2. H.E. Evans and G. Knowles: Acta Metall., 1977, vol. 25, pp. 963–75.10.1016/0001-6160(77)90185-7 ↗
3. J.H. Gittus: Acta Metall., 1978, vol. 26, pp. 305–17.10.1016/0001-6160(78)90130-X ↗
4. J.D. Parker and B. Wilshire: Phil. Mag. A, 1980, vol. 41, pp. 665–80.10.1080/01418618008239341 ↗
5. B. Burton: Phil. Mag. A, 1982, vol. 45, p. 657.10.1080/01418618208236196 ↗
6. F.C. Burton: Symposium on Plastic Deformation Crystalline Solids, Carnegie Institute of Technology and Department of the Navy, ONR, Washington, DC, 1950, p. 100.
7. R. Lagneborg: Met. Sci. J., 1972, vol. 6, pp. 127–33.10.1016/0036-9748(72)90263-3 ↗
8. R. Lagneborg and B.-H. Forsen: Acta Metall., 1973, vol. 21, pp. 781–90.10.1016/0001-6160(73)90042-4 ↗
9. R. Lagneborg, B.-H. Forsen and J. Wiberg: Creep Strength in Steel and High-Temperature Alloys, The Metals Society, London, 1974, pp. 1–7.
10. P. Ostrom and R. Lagneborg: J. Eng. Mater. Technol. Trans. ASME, 1976, Ser. H, vol. 98, pp. 114–24.10.1115/1.3443349 ↗
11. P. Ostrom and R. Lagneborg: Res. Mech., 1980, vol. 1, pp. 59–79.
12. A.J. Ardell and M.A. Pizystupa: Mech. Mater., 1984, vol. 3, pp. 319–32.10.1016/0167-6636(84)90032-2 ↗
13. M.A. Przystupa and A.J. Ardell: in Deformation, Processing and Properties of Structural Materials, E.M. Taleff, C.K. Syn, and D.R. Lesuer, eds., TMS, Warrendale, PA, 2000, pp. 157–68.
14. P. Lin, S.S. Lee, and A.J. Ardell: Acta Metall., 1989, vol. 37, pp. 739–48.10.1016/0001-6160(89)90257-5 ↗
15. A.J. Ardell and S. Lee: Acta Metall., 1986, vol. 34, pp. 2411–33.10.1016/0001-6160(86)90144-6 ↗
16. A.J. Ardell: Acta Mater., 1997, vol. 45, pp. 2971–81.10.1016/S1359-6454(96)00397-7 ↗
17. C. Wagner: Z. Elektrochem., 1961, vol. 65, p. 581.
18. M. Hillert: Acta Metall., 1965, vol. 13, pp. 227–38.10.1016/0001-6160(65)90200-2 ↗
19. A.J. Ardell and M.A. Przystupa: High Temp. Def. Processing, 1993, vol. 12, pp. 1–11.10.1515/HTMP.1993.12.1-2.1 ↗
20. H.E. Evans and G. Knowles: Acta Metall., 1977, vol. 25, pp. 963–75.10.1016/0001-6160(77)90185-7 ↗
21. J.P. Hirth and J. Lothe: Theory of Dislocations, 2nd ed., Krieger Publishing Company, Malabar, FL, 1992, p. 570.
22. I.M. Lifshitz and V.V. Slyozov: Sov. Phys. JETP, 1959, vol. 35, pp. 331–39.
23. S.S. Lee: Ph.D. Dissertation, UCLA, Los Angeles, CA, 1985.
24. J.C.M. Li: Recrystallization, Grain Growth and Texture, ASM, Metals Park, Ohio, 1966, p. 45.
25. W. Hausselt and W. Blum: Acta Metall.. 1976, vol. 24, pp. 1027–39.10.1016/0001-6160(76)90133-4 ↗
26. F.A. Mohamed and T.G. Langdon: Metall. Trans., 1974, vol. 5, pp. 2339–45.10.1007/BF02644014 ↗
27. C.R. Barrett and O.D. Sherby: Trans. AIME, 1964, vol 230, p. 1322.
28. J.N. Wang and T.G. Langdon: Acta Metall. Mater., 1994, vol. 42, pp. 2487–92.10.1016/0956-7151(94)90328-X ↗
29. J.N. Wang: Acta Mater., 1996, vol. 4, pp. 855–62.10.1016/1359-6454(95)00281-2 ↗
30. O.A. Ruano, J. Wadsworth, and O.D. Sherby: Acta Metall., 1988, vol. 36, pp. 1117–28.10.1016/0001-6160(88)90165-4 ↗
31. O.A. Ruano, J. Wadsworth, and O.D. Sherby: Scripta Metall., 1988, vol. 22, pp. 1907–10.10.1016/S0036-9748(88)80236-9 ↗
32. O.A. Ruano, J. Wolfenstine, J. Wadsworth, and O.D. Sherby: J. Am. Ceram. Soc., 1992, vol. 75, pp. 1737–41.10.1111/j.1151-2916.1992.tb07190.x ↗
33. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps, Pergamon Press, Oxford, United Kingdom, 1982.
34. C.R. Barrett, E.C. Muehleisen, and W.D. Nix: Mater. Sci. Eng., 1972, vol. 10, pp. 33–42.10.1016/0025-5416(72)90063-8 ↗
35. W.B. Banerdt and C.G. Sammis: Phys. Earth Planet. Interiors, 1985, vol. 41, pp. 108–24.10.1016/0031-9201(85)90026-3 ↗
36. J. Novotny, J. Fiala, and J. Cadek: Acta Metall., 1985, vol. 33, pp. 905–11.10.1016/0001-6160(85)90115-4 ↗
37. P.M. Sargent and M.F. Ashby: Scripta Metall., 1982, vol. 16, pp. 1415–22.10.1016/0036-9748(82)90439-2 ↗
38. K.S. Ramesh, E. Yasuda, and S. Kimura: J. Mater. Sci., 1986, vol. 21, pp. 3147–52.10.1007/BF00553350 ↗
39. K.S. Ramesh, E. Yasuda, S. Kimura, and K. Urabe: J. Mater. Sci., 1986, vol. 21, pp. 4015–18.10.1007/BF02431644 ↗
40. H. Jones and G.M. Leak: Acta Metall., 1966, vol. 14, pp. 21–27.10.1016/0001-6160(66)90268-9 ↗
41. R.G. Stang, W.D. Nix, and C.R. Barrett: Metall. Trans., 1973, vol. 4, pp. 1695–99.10.1007/BF02666198 ↗
42. P. Yavari, D.A. Miller, and T.G. Langdon: Acta Metall., 1982, vol. 30, pp. 871–79.10.1016/0001-6160(82)90085-2 ↗
43. G. Malakondaiah and P. Rama Rao: Scripta Metall., 1979, vol. 13, pp. 1187–90.10.1016/0036-9748(79)90280-1 ↗
44. D.L. Kohlstedt and C. Goetze: J. Geophys. Res., 1974, vol. 79, pp. 2045–51.10.1029/JB079i014p02045 ↗
45. M.G. Justice, Jr., E.K. Graham, R.E. Tressler, and I.S.T. Tsong: Geophys. Res. Lett., 1982, vol. 9, pp. 1005–08.10.1029/GL009i009p01005 ↗