Third Generation 0.3C-4.0Mn Advanced High Strength Steels Through a Dual Stabilization Heat Treatment: Austenite Stabilization Through Paraequilibrium Carbon Partitioning
Source abstract
Abstract
In excess of 30 vol. pct austenite can be retained in 0.3C-4.0Mn steels subjected to a dual stabilization heat treatment (DSHT) schedule—a five stage precisely controlled cooling schedule that is a variant of the quench and partition process. The temperature of the second quench (stage III) in the DSHT process plays an essential role in the retained austenite contents produced at carbon-partitioning temperatures of 723 K or 748 K (450° C or 475 °C) (stage IV). A thermodynamic model successfully predicted the retained austenite contents in heat-treated steels, particularly for a completely austenitized material. The microstructure and mechanical behavior of two heat-treated steels with similar levels of retained austenite (~30 vol. pct) were studied. Optimum properties—tensile strengths up to 1650 MPa and ~20 pct total elongation—were observed in a steel containing 0.3C-4.0Mn-2.1Si, 1.5 Al, and 0.5 Cr.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. D.K. Matlock, J.G. Speer, E. De Moor, P.J. Gibbs, JESTECH, 2012, vol. 15(1), pp. 1–12.
2. B.C. De Cooman, K. Chin, and J Kim: in New Trends and Developments in Automotive System Engineering, M. Chiaberge, ed., Intech, Rijeka, 2011, p. 101.
3. H.K.D.H. Bhadeshia and D.V. Edmonds: Met. Sci., 1983, vol. 17, pp. 411–19.10.1179/030634583790420600 ↗
4. J. Wang and S. van der Zwaag: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1527–39.10.1007/s11661-001-0240-5 ↗
5. E. Jimenez-Melero, N.H. van Dijk, L. Zhao, J. Sietsma, S.E. Offerman, J.P. Wright, and S. van der Zwaag: Acta Mater., 2009, vol. 57, pp. 533–43.10.1016/j.actamat.2008.09.040 ↗
6. A. Basuki and E. Aernoudt: J. Mater. Process. Technol., 1999, vols. 89–90, pp. 37–43.10.1016/S0924-0136(99)00037-0 ↗
7. S. van der Zwaag, L. Zhao, S.O. Kruijver, and J. Sietsma: ISIJ Int., 2002, vol. 42, pp. 1565–70.10.2355/isijinternational.42.1565 ↗
8. D.K. Matlock and J.G. Speer: in Microstructure and Texture in Steels, A. Haldar, S. Suwas, and D. Bhattacharjee, eds., Springer, London, 2009, p. 185.10.1007/978-1-84882-454-6_11 ↗
9. J. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–22.10.1016/S1359-6454(03)00059-4 ↗
10. J.G. Speer, D.V. Edmonds, F.C. Rizzo, and D.K. Matlock: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 219–37.10.1016/j.cossms.2004.09.003 ↗
11. D.V. Edmonds, K. He, F.C. Rizzo, B.C. DeCooman, D.K. Matlock, and J.G. Speer: Mater. Sci. Eng. A 2006, vols. 438–440, pp. 25-34.10.1016/j.msea.2006.02.133 ↗
12. A. Hultgren: Trans. ASM, 1947, vol. 39, p. 915.
13. M. Hillert, L. Höglund, and J. Ågren: Acta Metall. Mater., 1993, vol. 41, pp. 1951–57.10.1016/0956-7151(93)90365-Y ↗
14. E. De Moor, P.J. Gibbs, J.G. Speer, D.K. Matlock, and J.G. Schroth: AIST Trans., 2010, vol. 7 (3), pp. 133–44.
15. E. De Moor, J.G. Speer, D.K. Matlock, J.H. Kwak, S.B. Lee: Steel Res. Int., 2012, vol. 83(4), pp. 322–27.10.1002/srin.201100318 ↗
16. P.J. Gibbs, E. De Moor, M.J. Merwin, B. Clausen, J.G. Speer, D.K. Matlock, Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3691–702.10.1007/s11661-011-0687-y ↗
17. L. Wang, J.G. Speer, Metallogr. Microstruct. Anal., 2013, vol. 2, pp. 268–81.10.1007/s13632-013-0082-8 ↗
18. E.P. Bagliani, M.J. Santofimia, I. Zhao, J. Sietsma, E. Anelli, Mater. Sci. Eng. A, 2013, vol. 559, pp. 486–95.10.1016/j.msea.2012.08.130 ↗
19. J. Sun, H. Yu, Mater. Sci. Eng. A, 2013, vol. 586, pp. 100–7.10.1016/j.msea.2013.08.021 ↗
20. K. Ren, Y. Kang, and S. Zhu: Mater. Sci. Forum, vol. 749, pp. 303–7.10.4028/www.scientific.net/MSF.749.303 ↗
21. X. Tan, Y. Xu, X. Yang, Z. Liu, and D. Wu: Mater. Sci. Eng. A, doi:10.1016/j.msea.2013.11.064.10.1016/j.msea.2013.11.064 ↗
22. A.J. Clarke, J.G. Speer, D.K. Matlock, F.C. Rizzo, D.V. Edmonds, M.J. Santofimia, Scripta Mater., 2009, vol. 61, pp. 149–52.10.1016/j.scriptamat.2009.03.021 ↗
23. M.J. Santofimia, J.G. Speer, A.J. Zhao, J. Sietsma, Acta Mater., 2009, vol. 57, pp. 4548–57.10.1016/j.actamat.2009.06.024 ↗
24. M.J. Santofimia, L. Zhao, J. Sietsma, Scripta Mater., 2008, vol. 59, pp. 159–62.10.1016/j.scriptamat.2008.02.045 ↗
25. M.J. Santofimia, L. Zhao, R. Petrov, C. Kwakernaak, W.G. Sloof, J. Sietsma, Acta Mater., 2012, vol. 59, pp. 6059–68.10.1016/j.actamat.2011.06.014 ↗
26. H. Qu, G.M. Michal, and A.H. Heuer: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4450–53.10.1007/s11661-013-1871-z ↗
27. E.C. Bain and H.W. Paxton: Alloying Elements in Steel, American Society for Metals, Metals Park, 1966.
28. H.K.D.H. Bhadeshia and D.V. Edmonds: Metall. Trans. A, 1979, vol. 10A, pp. 895–907.10.1007/BF02658309 ↗
29. H. Qu: Ph.D. Thesis, Case Western Reserve University, 2013.
30. J.C. Russ: Practical Stereology, Plenum Press, New York, 1986.10.1007/978-1-4899-3533-5 ↗
31. B.L. Averbach, M. Cohen: Trans. AIME, 1978, vol. 176, pp. 401–15.
32. “E9-94a Test Methods for Tension Testing of Metallic Materials”, Annual Book of ASTM Standards: vol. 03.01, ASTM, West Conshohocken, PA, 1994.
33. R.L. Klueh: Nucl. Eng. Des. Fusion, 1985, vol. 2, pp. 407–16.10.1016/0167-899X(85)90028-X ↗
34. D.J. Dyson, B. Holmes, J. Iron Steel Inst., 1970, vol. 208, pp. 469.
35. K.W. Andrews: J. Iron Steel Inst., 1965, vol. 203, pp. 721–27.
36. D.P. Koistinen, R.E. Marburger: Acta Metall., 1959, vol. 7, pp. 59–60.10.1016/0001-6160(59)90170-1 ↗
37. Z.L. Xie, Y. Liu, and H. Hanninen: Acta Metall. et Mater., 1994, vol. 42(12), pp. 4117–33.10.1016/0956-7151(94)90189-9 ↗
38. J.Y. Koo and G. Thomas: Metall. Trans. A, 1977, vol. 8A, pp. 525–28.10.1007/BF02661770 ↗
39. R.G. Davies: Metall. Trans. A, 1979, vol. 10A, pp. 113-18.10.1007/BF02686414 ↗
40. Q. Furnémonta, M. Kempfb, P.J. Jacquesa, M. Gökenb, F. Delannaya: Mater. Sci. Eng. A, 2002, vol. 328(1–2), pp. 26–32.10.1016/S0921-5093(01)01689-6 ↗
41. W.F. Gale and T.C. Totemeir: Smithells Metals Reference Book, Elsevier Butterworth-Heinemann, Oxford, 2004.
42. Y. Takahama, M.J. Santofimia, M.G. Mecozzi, L. Zhao, J. Sietsma, Acta Mater., 2012, vol. 60, pp. 2916–26.10.1016/j.actamat.2012.01.055 ↗
43. T.D. Bigg, D.V. Edmonds, and E.S. Eardley, J. Alloys Compd., 2013, doi:10.1016/j.jallcom.2013.01.205.10.1016/j.jallcom.2013.01.205 ↗
44. M. Maalekian, E. Kozeschnik, CALPHAD, 2008, vol. 32, pp. 650–4.10.1016/j.calphad.2008.09.004 ↗
45. D. Kalish, E.M. Roberts, Metall. Trans. A, 1971, vol. 2A, pp. 2783–90.10.1007/BF02813252 ↗