journal article·2013-05

The Fracture Characteristics of a Near Eutectic Al-Si Based Alloy Under Compression

Sudha Joseph, Asim Tewari, S. Kumar

Publisher page

Abstract

The fracture of eutectic Si particles dictates the fracture characteristics of Al-Si based cast alloys. The morphology of these particles is found to play an important role in fracture initiation. In the current study, the effects of strain rate, temperature, strain, and heat treatment on Si particle fracture under compression were investigated. Strain rates ranging from 3 × 10−4/s to 102/s and three temperatures RT, 373 K, and 473 K (100 °C and 200 °C) are considered in this study. It is found that the Si particle fracture shows a small increase with increase in strain rate and decreases with increase in temperature at 10 pct strain. The flow stress at 10 pct strain exhibits the trend similar to particle fracture with strain rate and temperature. Particle fracture also increases with increase in strain. Large and elongated particles show a greater tendency for cracking. Most fracture occurs on particles oriented nearly perpendicular to the loading axis, and the cracks are found to occur almost parallel to the loading axis. At any strain rate, temperature, and strain, the Si particle fracture is greater for the heat-treated condition than for the non-heat-treated condition because of higher flow stress in the heat-treated condition. In addition to Si particle fracture, elongated Fe-rich intermetallic particles are also seen to fracture. These particles have specific crystallographic orientations and fracture along their major axis with the cleavage planes for their fracture being (100). Fracture of these particles might also play a role in the overall fracture behavior of this alloy since these particles cleave along their major axis leading to cracks longer than 200 μm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. A. Jambor and M. Beyer: Mater. Design, 1997, vol. 18, pp. 203-209.10.1016/S0261-3069(97)00049-6 ↗
2. D.D. Goehler: Proc. of Innovations and Advancements in Aluminium Casting Technology—AFS Special Conf., City of Industry, CA, AFS, Des Plaines, IL, 1998, pp. 103–06.
3. W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood, P. De Smet, A. Haszler and A. Vieregge: Mater. Sci. Engg. A, 2000, vol. 280, pp. 37-49.10.1016/S0921-5093(99)00653-X ↗
4. J.C. Jaquet: 2nd Int. Conf. on Molten Aluminium Proc., Orlando, FL, 1989, AFS, Des Plaines, IL, 1989, paper 2-1.
5. C.W. Meyers, A.Saigal and J.T. Berry: AFS Trans., 1983, vol. 91, pp. 281-88.
6. M.F. Hafiz and T. Kobayashi: Scripta Metall., 1994, vol.30, pp. 475-480.10.1016/0956-716X(94)90606-8 ↗
7. G. Guiglionda and W.J. Poole: Mater.Sci & Engg. A, 2002, vol. 336, pp. 159-169.10.1016/S0921-5093(01)01971-2 ↗
8. A.M. Samuel and F.H. Samuel: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2359-72.10.1007/BF02671250 ↗
9. J-.W. Yeh and W-.P. Liu: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3558-3568.10.1007/BF02595447 ↗
10. M.D. Dighe and A.M. Gokhale: Scripta Mater., 1997, vol. 37(9), pp. 1435–1440.10.1016/S1359-6462(97)00277-7 ↗
11. L.M. Brown and W.M. Stobbs: Phil. Mag., 1971, vol. 23, pp. 1185-99.,10.1080/14786437108217405 ↗
12. L.M. Brown and W.M. Stobbs: Phil. Mag., 1971, vol. 23, pp. 1201-33.10.1080/14786437108217406 ↗
13. C.H. Caceres, J.R. Griffiths and P. Reiner: Acta. Mater., 1996, vol. 44(1), pp. 15-23.10.1016/1359-6454(95)00171-6 ↗
14. C.H. Caceres and J.R. Griffiths: Acta. Mater., 1996, vol. 44(1), pp. 25-33.10.1016/1359-6454(95)00172-8 ↗
15. K. Wallin, T.Saario and K.Torronen: Int. J. Fract. 1987, vol.32, pp. 201-209.10.1007/BF00018353 ↗
16. M.F. Horstemeyer and A.M. Gokhale: Int. J. of solids and Struct., 1999, vol.36, pp. 5029-5055.10.1016/S0020-7683(98)00239-X ↗
17. G.Huber, Y.Brechet and T.Pardoen: Acta Mater., 2005, vol.53, pp. 2739-2749.10.1016/j.actamat.2005.02.037 ↗
18. M.F. Horstemeyer, J. Lathrop, A.M. Gokhale and M. Dighe: Theor. Appl. Fract. Mech., 2000, vol.33, pp. 31-47.10.1016/S0167-8442(99)00049-X ↗
19. W.J. Poole and N.Charras: Mater. Sci. & Engg. A, 2005, vol. 406, pp. 300-308.10.1016/j.msea.2005.06.041 ↗
20. M.D. Dighe, A.M. Gokhale, M.F. Horstemeyer and D.A. Mosher: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1725-1731.10.1007/s11661-998-0331-7 ↗
21. L.L. Mishnaevsky Jr., N. Lippmann, S.Schmauder and P. Gumbsch: Engg. Frac. Mech., 1999, vol.63, pp. 395-411.10.1016/S0013-7944(99)00027-2 ↗
22. Q.G. Wang, C.H. Caceres and J.R. Griffiths: Metall. Mater. Trans., 2003, vol. 34A, pp. 2901-2912.10.1007/s11661-003-0190-1 ↗
23. Q.G. Wang: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2887-2899.10.1007/s11661-003-0189-7 ↗
24. C.H. Caceres, C.J. Davidson and J.R. Griffiths: Mater. Sci. Engg. A, 1995, vol. 197, pp. 171-79.10.1016/0921-5093(94)09775-5 ↗
25. D.L. McLellan: AFS Trans., 1982, vol.90, pp. 173-191.
26. C.W. Meyers: AFS Trans., 1986, vol.94, pp. 511-518.
27. Q.G. Wang and C.H. Caceres: Mater. Sci. Engg. A, 1997, vol. 234-236, pp. 106-109.10.1016/S0921-5093(97)00207-4 ↗
28. A.M. Gokhale, M.D. Dighe, M. Horstemeyer: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 905–907.10.1007/s11661-998-0281-0 ↗
29. E. Rincon, H.F. Lopez, M.M. Cisneros and H. Mancha: Mater. Sci. Engg. A, 2009, vol. 519(1-2), pp. 128-140.10.1016/j.msea.2009.05.022 ↗
30. W.J. Poole and E.J. Dowdle: Scripta Mater., 1998, vol. 39(9), pp.1281-1287.10.1016/S1359-6462(98)00326-1 ↗
31. A. Tewari and A.M. Gokhale: Mater. Charac., 2001, vol. 46(4), pp. 329-335.10.1016/S1044-5803(01)00104-8 ↗
32. A. Kelly and W.B. Tyson: J. Mech. Phys. Solids, 1965, vol. 13, pp. 329-350.10.1016/0022-5096(65)90035-9 ↗
33. A.S. Argon, J. Im, and R. Safoglu: Metall. Trans. A, 1975, vol. 6A, pp. 825-37.10.1007/BF02672306 ↗
34. M.D. Dighe, A.M. Gokhale and M.F. Horstemeyer: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 555-565.10.1007/s11661-002-0117-2 ↗
35. F. Ebrahimi and L. Kalwani: Mat. Sci. Engg. A, 1999, vol. 268, pp. 116-26.10.1016/S0921-5093(99)00077-5 ↗