journal article·2006-01

Three-dimensional computational-cell modeling of the micromechanics of the martensitic transformation in transformation-induced-plasticity-assisted multiphase steels

Tim Van Rompaey, Frederic Lani, Bart Blanpain, Patrick Wollants, Pascal J. Jacques, Thomas Pardoen

Publisher page

Abstract

A three-dimensional finite-element microstructural cell model involving an inclusion of retained austenite embedded within a ferrite grain, which is surrounded by a homogeneous matrix representing the behavior of a transformation-induced-plasticity (TRIP)-assisted multiphase steel, was developed in order to address the micromechanics of the martensitic transformation in small isolated austenite grains. The transformation of a single martensite plate is simulated after various amounts of prior plastic deformation under different in-plane loading conditions. The values of the mechanical driving force and of the elastic and plastic accommodation energies associated with the transformation are calculated as a function of the externally applied loading conditions. The mechanical driving force and the total accommodation energy are of the same order of magnitude. The mechanical driving force depends upon the stress state and is the highest for plane-strain conditions. The total accommodation energy is almost independent of the stress state. It is affected by the amount of plastic straining prior to transformation and is very much dependent on the level of the shear component of the transformation strain. The results of this study provide guidelines for the development of realistic stress-state-dependent transformation evolution laws for TRIP-assisted multiphase steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. F.D. Fischer and G. Reisner: Acta Mater., 1998, vol. 46, pp. 2095–2102.10.1016/S1359-6454(97)00374-1 ↗
2. J.D. Eshelby: Proc. R. Soc. A, 1957, vol. 241, pp. 376–93.
3. T. Mori and K. Tanaka: Acta Metall., 1973, vol. 21, pp. 571–74.10.1016/0001-6160(73)90064-3 ↗
4. F. Marketz and F.D. Fischer: Comp. Mater. Sci., 1994, vol. 3, pp. 307–25.10.1016/0927-0256(94)90146-5 ↗
5. G. Reisner, F.D. Fischer, Y.H. Wen, and E.A. Werner: Metall. Trans. A, 1999, vol. 30A, pp. 2583–90.10.1007/s11661-999-0297-0 ↗
6. G.B. Olson and A.L. Roitburd: in Martensite, G.B. Olson and W.S. Owen, eds., ASM INTERNATIONAL, Metals Park, OH, 1992, pp. 149–74.
7. T. Van Rompaey, F. Lani, T. Pardoen, B. Blanpain, and P. Wollants: in Solid State Transformation and Heat Treatment, A. Hazotte, ed., Wiley-VCH, New York, NY, 2005, pp. 87–94.10.1002/3527604839.ch11 ↗
8. P.J. Jacques: Curr. Op. Solid State Mater. Sci., 2004, vol. 8, pp. 259–65.10.1016/j.cossms.2004.09.006 ↗
9. P.J. Jacques, Q. Furnémont, T. Pardoen, and F. Delannay: Acta Mater., 2001, vol. 49, pp. 139–52.10.1016/S1359-6454(00)00215-9 ↗
10. G. Krauss: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 861–90.10.1007/s11661-001-0344-y ↗
11. Q. Furnémont: Ph.D. Thesis, Université Catholique de Louvain, Louvain-la-Neuve, Belgium, 2003.
12. J.R. Patel and M. Cohen: Acta Metall., 1953, vol. 1, pp. 531–38.10.1016/0001-6160(53)90083-2 ↗
13. M. Grujicic, H.C. Ling, D.M. Haezebrouck, and W.S. Owen: in Martensite, G.B. Olson and W.S. Owen, eds., ASM INTERNATIONAL, Metals Park, OH, 1992, pp. 175–96.
14. V.I. Levitas: Int. J. Solids Struct., 1998, vol. 35, pp. 889–940.10.1016/S0020-7683(97)00089-9 ↗
15. D.C. Ludwigson and J.A. Berger: J. Iron. Steel. Inst., 1969, vol. 207, pp. 63–70.
16. O. Matsumura, Y. Sakuma, and H. Takechi: Trans. Iron Steel Inst. Jpn., 1987, vol. 27, pp. 570–79.10.2355/isijinternational1966.27.570 ↗
17. T. Tanaka and Y. Sato: Ing. Arch., 1985, vol. 55, pp. 147–57.10.1007/BF00536831 ↗
18. J.-B. Leblond, J. Devaux, and J.C. Devaux: Int. J. Plasticity, 1989, vol. 5, pp. 551–72.10.1016/0749-6419(89)90001-6 ↗
19. K. Sugimoto, N. Usui, M. Kobayashi, and S. Hashimoto: Trans. Iron Steel Inst. Jpn., 1992, vol. 78, pp. 1480–89.10.2355/tetsutohagane1955.78.9_1480 ↗
20. F.D. Fischer, Q.-P. Sun, and K. Tanaka: Appl. Mech. Rev., 1996, vol. 49, pp. 317–64.10.1115/1.3101930 ↗
21. M. Radu, J. Valy, A.F. Gourgues, F. Le Strat, and A. Pineau: Scripta Mater., 2005, vol. 52, pp. 525–30.10.1016/j.scriptamat.2004.10.034 ↗
22. R.D. James: in Materials Instabilities in Continuum Mechanics, J.M. Ball, ed., Clarendon Press, Oxford, United Kingdom, 1998, pp. 175–96.