journal article·2004-04

Fine carbide-strengthened 3Cr-2WVTa bainitic steel

Zheng Chen, Zhi-Wei Shan, Scott X. Mao, Ming-Jian Hua, N. Q. Wu, V. K. Sikka

Publisher page

Abstract

Both the 3Cr-3WV and the 3Cr-2WVTa steels exhibit an acicular bainite microstructure under the normalized and the normalized-and-tempered condition. The addition of Ta to the 3Cr-3WV steel substantially decreases the prior austenite grain size, but it has little effect on the bainite packet size. Fine TaC precipitates are formed in the normalized 3Cr-3WVTa specimen. After further tempering of 3Cr-3WVTa steel, fine TaC particles are further precipitated and dispersed within grains. The carbides at the prior austenite grain boundaries in the Ta-containing steel are much smaller than those in the steel without Ta. Tensile tests and fracture toughness (KIC) tests have been performed on both the 3Cr-3WV and 3Cr-3WVTa steels at room temperature. The 0.2 pct yield strength of the Ta-containing steel is higher than that of the steel without Ta, especially under the normalized-and-tempered condition. The 3Cr-3WVTa steel is primarily strengthened by a secondary-phase precipitation mechanism represented by the formation of fine carbides after tempering. The 3Cr-3WVTa steel exhibits higher fracture toughness than the 3Cr-3WV steel. The toughening mechanism is also discussed based on the dependence of the calculated fracture stress upon the carbide size and the bainite packet size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. R.L. Klueh, D.S. Gelles, and T.A. Lechtenberg: J. Nucl. Mater., 1986, vols. 141–143, pp. 1081–87.10.1016/0022-3115(86)90146-7 ↗
2. D. Dulidu, K.W. Tupholme, and G.J. Butterworth: J. Nucl. Mater., 1986, vols. 141–143, pp. 1097–01.10.1016/0022-3115(86)90148-0 ↗
3. M. Tamura, H. Hayakawa, M. Tanimura, A. Hishinuma, and T. Konda: J. Nucl. Mater., 1986, vols. 141–143, pp. 1067–73.10.1016/0022-3115(86)90144-3 ↗
4. E.E. Bloom: Nucl. Eng. Design/Fusion, 1985, vol. 2, pp. 383–89.10.1016/0167-899X(85)90026-6 ↗
5. R.L. Klueh and P.J. Maziasz: Metall. Mater. Trans. A, 1989, vol. 20A, pp. 373–82.10.1007/BF02653916 ↗
6. R.L. Klueh: Nucl. Eng. Design. 1982, vol. 72, pp. 329–44.10.1016/0029-5493(82)90047-4 ↗
7. R.L. Klueh, D.J. Alexander, and P.J. Maziasz: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 335–45.10.1007/s11661-997-0136-0 ↗
8. R.L. Klueh, D.J. Alexander, and P.J. Maziasz: J. Nucl. Mater., 1992, vol. 186, pp. 185–95.10.1016/0022-3115(92)90333-G ↗
9. R.L. Klueh and A.M. Nasreldin: Metall. Trans. A, 1987, vol. 18A, pp. 1279–90.10.1007/BF02647197 ↗
10. H. Schick: Thermodynamics of Certain Refractory Compounds, Academic Press, New York, NY, 1966, vol. 1, pp. 1–446.
11. J.P. Naylor and P.R. Krahe: Metall. Trans., 1974, vol. 5, pp. 1699–01.10.1007/BF02646352 ↗
12. R. Jayaram and R.L. Klueh: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1551–58.10.1007/s11661-998-0077-2 ↗
13. J.G. Nawrocki, J.N. Dupont, C.V. Robino, and A.R. Marder: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2585–94.10.1007/s11661-001-0048-3 ↗
14. G.T. Hahn: Metall. Trans. A, 1984, vol. 15A, pp. 947–59.10.1007/BF02644685 ↗
15. R.L. Klueh, D.J. Alexander, and M.A. Sokolov: J. Nucl. Mater., 2002, vol. 304, pp. 139–52.10.1016/S0022-3115(02)00885-1 ↗
16. P. Bowen, S.G. Druce, and J.F. Knott: Acta Metall., 1986, vol. 34, pp. 1121–31.10.1016/0001-6160(86)90222-1 ↗
17. G.J. Cai, H.O. Andren, and L.E. Svensson: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1417–28.10.1007/s11661-997-0204-5 ↗
18. N.J. Petch: Acta Metall., 1986, vol. 34, pp. 1387–93.10.1016/0001-6160(86)90026-X ↗
19. E.A. Brandes: Smithell’s Metals Reference Book, 6th ed., Butterworth and Co., London, 1983.
20. D.A. Curry and J.F. Knott: Met. Sci., 1978, vol. 12, pp. 511–13.10.1016/0036-9748(78)90198-9 ↗
21. F.P.L. Kavishe: Mater. Sci. Technol., 1990, vol. 6, pp. 422–27.10.1179/mst.1990.6.5.422 ↗